Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I7e59ae718d2722c49d42b22a0874e1645a191e89
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Allows app to push data. Additionally, ensure reset/close replies are
not sent unless vcl closes the session.
Change-Id: Icbbf933cf57b55cfbcc7b802af0f83919a066f65
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In addition to that, a bit of refactoring.
Change-Id: Iea1eabc2167bcdef185ec53bc09bae087c5398e6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If7835e9b80ec9402404bfc8d271eb11a10ef992b
Signed-off-by: Pavel Kotucek <pavel.kotucek@pantheon.tech>
|
|
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ie4c5cfc4c97acb321a46b4df589dc44de1b616ba
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
According to the RFC 4096 (section 3.3.1) the DATA chunk needs to be
padded to a boundary of 4 bytes with zeros. This patch addresses that
requirement.
At the same time, this patch takes care of adding some hardening for
corner-cases where the transmitted tag could be wrong.
Change-Id: I3b653926e9933d0d3d46bc5f37eaceefd932e874
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
A copy/paste mistake caused to add padding to the buffer used to send
data.
Change-Id: I04d8dfec4ae195927be1675c5ce8b30230d5b376
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I03bb47a2baa4375b7bf9347d95c4cc8de37fe510
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Ied63ebaec8e19189f8b1ab2a7f6d7474c3f2ad6e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- Cleanup session state after last ack and avoid using a cleanup timer.
- Change session cleanup to free the session as opposed to waiting for
delete notify.
- When in close-wait, postpone sending the fin on close until all
outstanding data has been sent.
- Don't flush rx fifo unless in closed state
Change-Id: Ic2a4f0d5568b65c83f4b55b6c469a7b24b947f39
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Add a session process node that handles main thread tx and retransmit in
order to avoid having a polling input node.
Change-Id: I3357e987c023a84b533b32793e37ab4204420f64
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Object sizes must evenly divide alignment requests, or vice
versa. Otherwise, only the first object will be aligned as
requested.
Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at
the end of structures, manually pad to an even divisor or multiple of
the alignment request, or use plain vectors/pools.
static assert for enforcement.
Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
|
|
This patch addresses the warning 182994
Change-Id: I071f3cbdf9965c7b57d444f79430ee75c66c856e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses 182346, 182347, 182353.
Change-Id: I59c3d74bd3a2122b836c93e22ddb632fa032f7fe
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Following TCP fixes from Florin (11430), this patch follows the same
approach to indicate a fib (not just using the default one).
Change-Id: Ib883aa0e9a1c6157acfea69c44426ba07d6c932a
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses two things:
1) The data retransmission which needs to be taken care of when the
SCTP_TIMER_T3_RXTX;
2) The correct calculation of the amount of data transmittable
considered: the local window, the peer window and any data inflight.
Change-Id: I2d03a6cb43e4e7770c4910f8547c66e1026aeace
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
A bug was found affecting the cumulative sending of SACK messages.
Because the next0 was never assigned to the next_output the SACK message
was never leaving the peer.
Further, two new flags have been added to distinguish when a peer is
AWAITING a SACK message (e.g. DATA is inflight and waiting to be
acknowledged).
Change-Id: Ibb5a98f7e5fed15cdc76710b74195cac031d59ed
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch adds the possibility to configure some behaviors of the SCTP
stack based on some tunable parameters (mainly ON/OFF). For the time
being, that is limited to the bundling option (multiplexing messages)
and to delaying the SACK message.
Change-Id: I696493e0309e47163c1e119c7d9f82f7d8ee6b87
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the need to handle timers timeouts (e.g. sent
chunks not being acked) for both the INIT and SHUTDOWN phases.
The INIT phase requires the handling of two timers the T1-init and
T1-cookie timers whilst the SHUTDOWN phase requires the handling of the
T2-shutdown timer only for the retransmission case.
Left to be implemented is the handling of the DATA chunks retransmission
(e.g. T3-rxtx expiration) but that will be submitted with a separate
patch.
Change-Id: I2b2e13dce11000aea3c7d965f02b27b76c97e605
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
It consists of two main parts. First, add an application transport type
whereby applications can offer transport to other applications. For
instance, a tls app can offer transport services to other applications.
And second, a tls transport app that leverages the mbedtls library for
tls protocol implementation.
Change-Id: I616996c6e6539a9e2368fab8a1ac874d7c5d9838
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch adds an API to delete a sub-connection following a SRC/DST IP
mapping as required by the RFC4960.
Change-Id: I7673dd07352557442ffeed6c6c00da274b24953d
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch adds an API to add a sub-connection following a SRC/DST IP
mapping as required by the RFC4960.
At the same time, it changes the way the next available sub-connection
is being calculated: rather than having an index in the parent
connection which is prone to many issues at run-time, the next available
sub-connection is being calculated by looking at the state of the set
sub-connections and if marked as DOWN it means that is an available slot
to be used.
Change-Id: I662be6a247bfbbe8bf9aaf3f485183c07ef862fe
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch address the requirement to handle a COOKIE chunk whilst in
SHUTDOWN phase. The COOKIE shouldn't just be dropped but an OPERATION
ERROR chunk shall be sent to the peer to inform about the current
situation.
Change-Id: I1a47652402d49cfee3b0c810304d7902f3a62f40
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
enabled
Fixed a typo in sctp_push_header(). It was inherited from tcp_output.c
Change-Id: I810fcb4c24cfd3d54f15da72a5184cfc4df24592
Signed-off-by: Steven <sluong@cisco.com>
|
|
This patch addresses the requirements depicted in section 5.2.4 of the
RFC 4960. It also takes care of handling the ERROR chunk and obviously
the STALE COOKIE error.
Change-Id: I6b88a9371546b18a52abac22f7c593a5f16be838
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
As per RFC4960 the INIT chunk could be received in unexpected scenarios
and - depending on the state of the internal state-machine - the INIT
chunk requires different treatment.
This patch addresses section 5.2.1 and 5.2.2 of the RFC4960.
Change-Id: Ib23ef490c6a5ca3da6c46a9584b75e7577cb7042
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
A bug was found when multiple SCTP connections were being opened to the
same SCTP server. This patch addresses that problem, removing the use of
the 'parent' pointer approach for sub-connection and saving instead
within the sub-connection itself the ID representing its position. That
facilitates pointer-arithmetic to be computed in the
get_connection_from_transport().
Change-Id: Iaa1f4efc501590be1c93e42fd6fe3d6e02f635eb
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch adds some missing information in various debugging messages
which can help with debugging state-machine and connection-tracking.
It also renames some internal variable names for better code
readibility.
Change-Id: I68503fc0214300032f7514426c8b5b2b12edf11a
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the requirements depicted by section 7.1.1 and
7.1.2 of the RFC 4960. Specifically, it implements the Slow-start and
Congestion-avoidance policies.
The patch also took care of correctly implementing some 'formatting'
functions required - for instance - in packet(s) tracing.
Change-Id: I68eade1b30345de3acb3ac8a653a5ef76eb6d2ac
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the SCTP requirement for multiple sub-connections
to implement the so called 'multi-homed' scenario.
Change-Id: Ibce18f216e9d2bebe318992c441bf278e16aad17
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I1f8a325eac2a9e2c825996f04026ae86259a7ddd
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
The issue observed in the output-node was actually
caused by one of the input-node pushing buffers to
the output node when not required. That is the case
with the parsing/handling of incoming packets like
the COOKIE_ACK, HEARTBEAT_ACK, DATA, SACK which do
not require a response to be sent to the other peer.
In all the mentioned cases the packets (buffers) need
to be consumed and dropped instead of heading to the
output-node.
Change-Id: I3dcbe5de1cedb2ab8b06fff4364749b525cc7ac6
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch takes care of some refactoring, including the initialization
of the timestamp to calculate the RTO, the output state-machine
validation which can be enabled (disabled by default) when debugging and
some clean-up of unused fields.
It also addresses the requirement of Karn's algorithm when computing the
RTO.
Change-Id: I6b875152369bff23cad085708cec1f7e1151cfa8
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I070771794be92fd9a6e800ca0022e52d592cd1a4
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses some bugs discovered with the shutdown phase which
were causing the actual chunks not to leave the output_node.
While fixing the issue some minor refactoring was also performed to
align the internal functions to a 'common' design.
Change-Id: Ieac4f6e78cffad2e6982536f8e9f190a66f328f7
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iba7c398a398e24b96eb536bbcefa841bd153a205
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch address the need to send/receive heartbeats between peers.
At the same time, the number of unacked heartbeats is tracked and when
the peer requests to send DATA to the remote-peer the value of unacked
heartbeats needs to be checked against the maximum value allowed for
retransmissions. If the unacked heartbeats value is higher then the
remote-peer is considered unreachable and the connetion needs to be
shutdown.
Change-Id: I2b1a21c26775e734dbe82486f40982ed5702dc63
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
When the number of threads results being more than 1, the spinlock
structure requires to be initialized otherwise subsequent calls to
the "lock" API (clib_spinlock_lock_if_init) would result in a void
operation.
Change-Id: Ia268c4687252e41962bb3f1217f0a849d8c40385
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the need to calculate the RTO / RTT and RTTVAR
according to the rules depicted by the RFC4960 at section 6.3.1
Change-Id: I1d346f3c67610070b3f602f32c7738d58b99ffed
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the need to handle out-of-order data chunks
received by a peer. To do that effectively, we had to add the handling
of data chunks flags (E/B/U bit) to understand whether the stream is
fragmenting user-message data and in that case if a fragment is the
FIRST/MIDDLE/LAST one of a transmission.
The same patch also addresses the security requirement to have a HMAC
calculated and incorporated in the INIT_ACK and COOKIE_ECHO chunks. The
algorithm used is the HMAC-SHA1.
Change-Id: Ib6a9a80492e2aafe5c8480d6e02da895efe9f90b
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch addresses the missing field in various data-structures to
track valuable information to implement the congestion-control
algorithms and manage sub-connections states.
It adds the possibility to queue up to 2 SACKs chunks when the connection
is not gapping.
At the same time, it pushes some variable/field renaming for better
readibility.
Change-Id: Idcc53512983456779600a75e78e21af078e46602
Signed-off-by: Marco Varlese <marco.varlese@suse.de>
|
|
This consolidates builtin apps under session-apps folder. It also
removes duplicate builtin echo server/client implementations.
Change-Id: I75ed879399c5aa9b75b1eb38b33aedf69dd8df3f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- update segment manager and session api to work with both flavors of
ssvm segments
- added generic ssvm slave/master init and del functions
- cleanup/refactor tcp_echo
- fixed uses of svm fifo pool as vector
Change-Id: Ieee8b163faa407da6e77e657a2322de213a9d2a0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
== CONTENT ==
* SCTP chunks definition as per RFC4960;
* Helper functions to set/get values to/from the corresponding chunks;
* Hooks to the session/application layers;
* Complete state-machine handling;
* Implementation for unexpected chunk received in a certain
state (state-machine error handling)
* Support for 1-single connection;
* Sample application to test receive/transmit data-path;
* Test to validate SCTP stack;
Change-Id: I1b55c455ab400be9513f4e094dadfc3181d2ebc9
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|