Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I68152d7338ce0d7805e50ccf9e9046de02cfd206
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
To enable this, applications set the proxy flag in their attach requests
and pass the transport protocols they want to act as proxies for as part
of the attach options.
When proxy is enabled, session rules that point incoming packets to the
proxy app are addedd to the local and global session tables, if these
scopes are accessible to the app. In particular, in case of the former,
the rule accepts packets from all sources and all ports destined to the
namespace's supporting interface address on any port. While in case of
the latter, a generic any destination and any port rule is addedd.
Change-Id: I791f8c1cc083350f02e26a2ac3bdbbfbfa19ece3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I7794d5a0774017da4c1c15f45783a18754994ac8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I193832a0cd0557fffc034a1223f67fa64a4d45ae
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I44d5c9df7c49b8d4d5677c6d319033b2da3e6b80
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Applications are now provided the option to select the namespace they
are to be attached to and the scope of their attachement. Application
namespaces are meant to:
1) constrain the scope of communication through the network by
association with source interfaces and/or fib tables that provide the
source ips to be used and limit the scope of routing
2) provide a namespace local scope to session layer communication, as
opposed to the global scope provided by 1). That is, sessions can be
established without assistance from transport and network layers.
Albeit, zero/local-host ip addresses must still be provided in session
establishment messages due to existing application idiosyncrasies. This
mode of communication uses shared-memory fifos (cut-through sessions)
exclusively.
If applications request no namespace, they are assigned to the default
one, which at its turn uses the default fib. Applications can request
access to both local and global scopes for a namespace. If no scope is
specified, session layer defaults to the global one.
When a sw_if_index is provided for a namespace, zero-ip (INADDR_ANY)
binds are converted to binds to the requested interface.
Change-Id: Ia0f660bbf7eec7f89673f75b4821fc7c3d58e3d1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- add preallocated segment flag
- don't remove pre-allocated segments except if application detaches
- when preallocating fifos in multiple segments, completely fill
a segment before moving to the next
- detach server application from segment-managers when deleting app
- batch syn/syn-ack/fin (re)transmissions
- loosen up close-wait and time-wait times
Change-Id: I412f53ce601cc83b3acc26aeffd7fa2d52d73b03
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
177117: fstat() returns -1 on error; the code is
checking for any positive value instead
175142: final return could never be reached; simple
refactoring
175235,175236: Warning suppressed with an explicit
cast to (void)
174817: Final return couldn't be reached; is
is_in_order is 0 then 'rv' is already returned
above
172095,172093: If is_is_set does not get set to 1,
then return 0 has already been invoked
174405: Re-kill this (nothing sets rv)
171136: Looks like a cmd line flag to set test_bytes
was missing; added it, and refactored the
argc/argv processing to avoid two other
potential segv's
176813: Add range checking for term width/height.
First stab at a reasonable range is 1-512
for both.
175350: Fix implicit casting in shift operation
174272: Not a c+p error; try using a coverity
annotation to ignore it
174273,175320: Annotated FORWARD_NULL
Change-Id: I58d0f860fc2209f59f8d1b6b344d631b8d429ace
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
- do not scale syn-ack window
- fix the max number of outstanding syns in builtin client
- fix syn-sent ack validation to use modulo arithmetic
- improve retransmit timer handler
- fix output buffer allocator leakeage
- improved debugging
Change-Id: Iac3bc0eadf7d0b494a93e22d210a3153b61b3273
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Simply call pool_init_fixed(...) before using the pool. Note that
fixed, preallocated pools live in individually-mmap'ed address
segments, except for the free element bitmap. A large fixed pool can
exceed 4gb.
Fix tcp buffer allocator leak, remove broken assert
Change-Id: I4421082e12a77c41c6e20f7747f3150dcd01fc26
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Additionally, flush rx fifos for closed sessions.
Change-Id: If2cc563fbda0451e7572650e98b15f0a694a0ff9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- cleanup connects segment manager even if first
- fix segment manager allocation for listen sessions
- improve handling of process private segments (mheaps/main heap)
- added segment manager cli
Change-Id: Ic2ca97c3622ab2286d5fb5772aeb57680e64f769
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- set session state as closed on session manager delete
- enable retransmit as opposed to persist timer after persist timer completes
- properly discard buffer chain bytes when new data overlaps ooo
segments
- don't use rxt bytes in snd space estimate used on tx path
Change-Id: Id9cab686e532e5fe70c775d5440260e8eb890a9f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia6dd5e948b17b2f3866fe70838eabb09e35415e1
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Add SYN_RCVD timeout
- Fix FIN_WAIT_1 to CLOSING transition
Change-Id: I42ca7fc087f6fdfae15bd7a6175dd3226ed341c7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Fix tcp/udp sw checksum computation
- Fix allocation of multi buffer tcp segments for retransmits
- Send FIN only if/when tx fifo is empty
Change-Id: I2e43a14b87a72c9e547b4339b9a51811cf5732c4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Round up requested fifo size to the next power of two
- Maintain per-segment power-of-two freelists
- Allocate fifos in chunks, to amortize alignment overhead
- Detach builtin test client application after each run
so we can use different fifo sizes each time
- Be more suspicious of session / application indices
Useful prep work for dynamically resizing fifos. As far as the svm
fifo code is concerned, it's OK to set fifo->nitems anywhere in the
interval: [0, 1<<(fifo->freelist_index) + FIFO_SEGMENT_MIN_FIFO_SIZE]
It's unlikely that setting nitems below the path MTU will work out
very well...
Change-Id: Idad73a027dfb7412056cb02988b77e300fa7e8a7
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Clean up internal API client registration
- Add proxy server
- Add a reference count to the svm fifo
Change-Id: I5ace1c85497062ed412d26ae76a9e6741af1e984
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Make tcp output buffer allocation macro an inline function
- Use per ip version per thread tx frames for retransmits and timer
events
- Fix / parameterize tcp data structure preallocation
- Add a couple of gdb-callable show commands
- Fix local endpoint cleanup
Change-Id: I67b47b7570aa14cb4634b6fd93c57cd2eacbfa29
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Cleanup half-open connections and timers on the right thread
- Ensure half-open connection and transport endpoint pools are thread safe
- Enqueue TX events to the correct vpp thread in the builtin client
- Use transport proto in transport connections instead of session type
Change-Id: Id13239a206afbff6f34a38afa510fe014e4b2049
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ica99e8cb919fca6b069c37c969d60e8ccc2c6bf9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Increment rcv_nxt for fin packets
- Call tcp_segment_rcv only if buffer has data
- Parse rcv opts before deleting half-open connection
- Fix initial rcv_wnd
- Improved event logging
Change-Id: I9b83c04f432c4cec832c480b03e534deff02c3b1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Fix rx sack option parsing
- Add session sack scoreboard tracing and replaying
- Add svm fifo tracing and replaying
- Scoreboard/svm fifo ooo segment reception fixes
- Improved overall debugging
Change-Id: Ieae07eba355e66f5935253232bb00f2dfb7ece00
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Data structure preallocation.
- Input state machine fixes for mid-stream 3-way handshake retries.
- Batch connections in the builtin_client
- Multiple private fifo segment support
- Fix elog simultaneous event type registration
- Fix sacks when segment hole is added after highest sacked
- Add "accepting" session state for sessions pending accept
- Add ssvm non-recursive locking
- Estimate RTT for syn-ack
- Don't init fifo pointers. We're using relative offsets for ooo
segments
- CLI to dump individual session
Change-Id: Ie0598563fd246537bafba4feed7985478ea1d415
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- limit minimum rto per connection
- cleanup sack scoreboard
- switched svm fifo out-of-order data handling from absolute offsets to
relative offsets.
- improve cwnd handling when using sacks
- add cc event debug stats
- improved uri tcp test client/server: bugfixes and added half-duplex mode
- expanded builtin client/server
- updated uri socket client/server code to work in half-duplex
- ensure session node unsets fifo event for empty fifo
- fix session detach
Change-Id: Ia446972340e32a65e0694ee2844355167d0c170d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- refactor existing congestion control code (RFC 6582/5681). Handling of ack
feedback now consists of: ack parsing, cc event detection, event handling,
congestion control update
- extend sack scoreboard to support sack based retransmissions
- basic implementation of Eifel detection algorithm (RFC 3522) for
detecting spurious retransmissions
- actually initialize the per-thread frame freelist hash tables
- increase worker stack size to 2mb
- fix session queue node out-of-buffer handling
- ensure that the local buffer cache vec_len matches reality
- avoid 2x spurious event requeues when short of buffers
- count out-of-buffer events
- make the builtin server thread-safe
- fix bihash template threading issue: need to paint -1 across uninitialized
working_copy_length vector elements (via rebase from master)
Change-Id: I646cb9f1add9a67d08f4a87badbcb117980ebfc4
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
- add option to preallocate fifos in a segment
- track active fifos with doubly linked list instead of vector
- update udp redirect test code to read fifo pointers from API call
instead of digging them up from fifo segment header
- input-node based active-open session generator
Change-Id: I804b81e99d95f8690d17e12660c6645995e28a9a
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Fix builtin server event queue handling
Change-Id: I21b49c37188746cadb2fd9423291c5dc1335798c
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
- Properly initialize connection index
- Add new session to main hash table
- Drop packets that are completely in the past with respect to the rcv
wnd (e.g., retransmits due to premature timer pops)
Change-Id: Ic0873018ff0a4c59e0913863dc7f0c0f822d5c34
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Visit http://<vpp-ip>/show/interface or similar.
Change-Id: I076b4661cf19d1b94bb01efdadb5849446be915e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I01c6e3dc3a1b2785df37bb66b19c4b5cbb8f3211
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Improve svm fifo handling of out-of-order segments
- Ensure tsval_recent is updated only if rcv_las falls withing the
segments's sequence space
- Avoid directly dropping old ACKs
- Improve debugging
Change-Id: I88dbe2394a0ad7eb389a4cc12d013a13733953aa
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Among others:
- Moved app event queue to shared memory segment
- Use private memory segment for builtin apps
- Remove pid from svm fifo
- Protect session fifo (de)allocation
- Use fifo event for session disconnects
- Have session queue node poll in all wk threads
Change-Id: I89dbf7fdfebef12f5ef2b34ba3ef3c2c07f49ff2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Major refactoring of the session layer api
- Add attatch api for application binding to the the session layer
- Simplify listen/connect calls
- Update application CLI
- Add transport endpoint to accept callback
- Associate segment manager to application and allow for multiple
binds/connects per app
Additional:
- svm fifo cleanup
- add fifo free, format fns
- add fifo offset enqueue unit test
Change-Id: Id93a65047de61afc2bf3d58c9b544339c02065af
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- added persist timer
- update rcv_las whenever sending an ack
- moved fifo size to its own cache line
- improved session and builtin client debugging
Change-Id: Ia649cf942cf0c061a713e8b67f0eb6974a6cd55b
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Added svm fifo flag for tracking fifo dequeue events (replaces event
length). Updated all code to switch to the new scheme.
- More session debugging
- Fix peek index wrap
- Add a trivial socket test client
- Fast retransmit/cc fixes
- tx and rx SACK fixes and unit testing
- SRTT computation fix
- remove dupack/ack burst filters
- improve ack rx
- improved segment rx
- builtin client test code
Change-Id: Ic4eb2d5ca446eb2260ccd3ccbcdaa73c64e7f4e1
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
- event-logging support for tcp and session layer
- improvements to uri test code
- builtin_server on port 1234
- use the CLOSEWAIT timer when we rx FIN in FIN_WAIT_2 state
Change-Id: Ibc445f164b2086b20323bf89c77cffd3059f570f
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- builtin test echo server
- fix SYN-ACK retransmit canceling
- avoid sending spurious ACK if in LAST_ACK
- improved client dummy test app
- renamed tx fifo dequeuing and sending functions to avoid confusion
- improved RST handling
Change-Id: Ia14aad3df319540dcf6e6a4e18a9f8d423a4b83b
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I73154179e78aeae5f879125237bce593d0978fae
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Add CLI/API to enable session layer, by default it's disabled
- Improve rcv wnd computation
- Improvements to tx path
- URI code cleanup
- Builtin test tcp server
- Improve src port allocation
Change-Id: I2ace498e76a0771d4c31a8075cc14fe33d7dfa38
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|