Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Idc7dfe743399dd8dee0f6b3ec83f194f3fca580b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- remove unused functions
- rename old "stream" functions
Change-Id: Icbb03daa9f9f1c58b5be5c38aa8a9cbcf9159b47
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Instead of constantly reallocating the new sack block list, keep the old
one as a reusable free list.
Change-Id: Iad79a72204f97b96352c1c6eea66c2839a35cfe6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Make sure we send enough dupacks to cover all the holes created in the
last frame received. Also make sure we send all the blocks, not just the
first.
Change-Id: I9597a34ac14473d1cc3ad07d65bc37043e3d0582
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Better handle buffer starvation scenarios
- Handle case when both peers enter recovery due to packet loss.
- Fix passive open establish cleanup
Change-Id: I2f28baa2ff0383bb8f5f6d2452b49aa38ce69bce
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4e836244409c98739a13092ee252542a2c5fe259
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Example:
buffers {
default data-size 1536
}
Change-Id: I5b4436850ca18025c9fdcfc7ed648c2c2732d660
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- move transport specific types to transport_types
- add transport wrapper functions for interaction with transport
protocol vfts
Change-Id: I93f70d884585fc2f41c4a605e310c80e8a8972f2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If30cea80058752cedcc6ecc38e90bef8732c83d3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I6732adc06fbb3d4b427e671ddcfe6eabc08d4a1b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3638221e59024d6b7d82499d57e25b8e609f73cb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Allows app to push data. Additionally, ensure reset/close replies are
not sent unless vcl closes the session.
Change-Id: Icbbf933cf57b55cfbcc7b802af0f83919a066f65
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In addition to that, a bit of refactoring.
Change-Id: Iea1eabc2167bcdef185ec53bc09bae087c5398e6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia2241e963cf45765d8d17c65eea781edbf74d4f9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
syn/fin are no longer added to seq_end so they must be considered
individually in each state.
Change-Id: I5e3047194101c4fca2db9f9ad29a4a6468c397ab
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I90056176194cb2a144d49a3cb283653d8d30f051
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Also add the closed-waiting session state wherein the session still
allows the transport to send oustanding data.
Change-Id: Ic47807379906ef2010934381ff0b9e53c7e631d8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4a811672b27c70bf0e9652c175c7f4168ec40ed7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iba7c08c9edcf76ea24d00d5ea9e0586e9f94df4e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Disconnect transport even if tx fifo is not empty and have transport
deal with the problem. In case of tcp, add timer to fin_wait_1. If it
expires and we're still in established state, cleanup but only after
waiting for session tx events to cleanup.
Change-Id: I45759a3c43dd096bb2c03daf5372416c30678d62
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia8b2a077ba4897ddd15cf33221b191cd7a3f1d33
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Also further improves reset handling.
Change-Id: I6e517632f700f181761726b965134e0c217eb06d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
For tcp this means that the last enqueued data goes out with a psh bit
set.
Change-Id: I29d357ecae6f02e748b59a7b799150ec73d14ba2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I45fd7538853f84c6c8bf804cc20acbc9601db3ba
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I3a15960fe346763faf13e8728ce36c2f3bf7b05a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Make sure that we notify the app of the data enqueued in the burst
before notifying of disconnect.
Change-Id: I7747a5cbb4c6bc9132007f849c24ce04b7841273
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Because the code is not optimized, newreno is still the default
congestion control algorithm.
Change-Id: I7061cc80c5a75fa8e8265901fae4ea2888e35173
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- update pacer once per burst
- better estimate initial rtt
- compute smoothed average for higher precision rtt estimate
Change-Id: I06d41a98784cdf861bedfbee2e7d0afc0d0154ef
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Instead of reusing buffers for acking, consume all buffers and program
output for (dup)ack generation. This implicitly fixes the drop counters
that were artificially inflated by both data and feedback traffic.
Moreover, the patch also significantly reduces the ack traffic as we now
only generate an ack per frame, unless duplicate acks need to be sent.
Because of the reduced feedback traffic, a sender's rx path and a
receiver's tx path are now significantly less loaded. In particular, a
sender can overwhelm a 40Gbps NIC and generate tx drop bursts for low
rtts. Consequently, tx pacing is now enforced by default.
Change-Id: I619c29a8945bf26c093f8f9e197e3c6d5d43868e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Avoid dequeuing acked bytes more than once per burst for a connection.
Although the fifos do not use locks, size decrements are atomic, so they
rely on locked instructions.
Change-Id: Id65f4ea40b2c10057461402dfd0393034e6472d5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Allows sending of unsent data in fast recovery and consolidates logic in
tcp, instead of splitting it between tcp fast retransmit and tcp output
path called by the session layer.
Change-Id: I9b12cdf2aa2ac50b9f25e46856fed037163501fe
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib15d629c5fde7849bfa3307f42659e920eb0f463
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Also reset pacer on tcp retransmit timeout
Change-Id: I5a9edee4c00d1d169248d79587a9b10437c2bd87
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Also propagate tcp worker context instead of retrieving it multiple
times.
Change-Id: I7b273b981826b37783566d0172a64cd6957f3b33
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Force pacing for fast retransmit to avoid bursts of retransmitted
packets.
Change-Id: I2ff42c328899b36322c4de557b1f7d853dba8fe2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie4c5cfc4c97acb321a46b4df589dc44de1b616ba
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Avoid possible null pointer dereference
Change-Id: If8023edb43aaf037234f4a7b5f191cb23b09c74d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I91c9d040fc9b9b63f7109eeaac334c47fb1226cf
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Adds tx pacing infrastructure for transport protocols that want to use
it. Particularly useful for connections with non-negligible rtt and
constrained network throughput as it avoids large tx bursts that lead to
local interface tx or network drops.
By default the pacer is disabled. To enabled it for tcp, add tx-pacing
to tcp's startup conf. We are still slightly inefficient in the handling
of incoming packets in established state so the pacer slightly affect
maximum throughput in low lacency scenarios.
Change-Id: Id445b2ffcd64cce015f75b773f7d722faa0f7ca9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Patch is too large to be ported to 18.10 just days before release.
- handle fast retransmits outside of established node and limit the
retransmit burst size to avoid tx losses and worsening congestion.
- in the absance of a tx pacer, use slow start after fast retransmit
exists
- add fast retransmit heuristic that re-retries sending the first
segment if everything else fails
- fine tuning
Change-Id: I84a2ab8fbba8b97f1d2b26584dc11a1e2c33c8d2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- fix delete of connection in syn-received
- fix delete of half-open connection
Change-Id: I72ff4b60406a2762d998328c52f41adea40d2c1b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If81ee34e1f1e929de1a5b758ddb9aede4002e858
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icba9b0dc6dcb4b72288f966728201812d8d12144
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Idf83fce8ca176e57b323e3741034e3223f1d195a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icff3d688506e7658330db004c58bcfcac273fcec
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- cache and reuse tcp options and rcv_wnd for session layer tx bursts
- avoid reading/setting total_length_not_including_first_buffer. It's
part of a buffer's second cache line so it comes at a "cost".
Change-Id: Id18219c2f7e07cf4c63ee74f9cdd9e5918904036
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- sprinkle statics for functions
- move some inlines from header files to corresponding .c files
- replace some always_inlines with statics where inlining is not
performance critical
Change-Id: I371dbf63431ce7e27e4ebbbdd844a9546a1f1849
Signed-off-by: Florin Coras <fcoras@cisco.com>
|