Age | Commit message (Collapse) | Author | Files | Lines |
|
Adds tx pacing infrastructure for transport protocols that want to use
it. Particularly useful for connections with non-negligible rtt and
constrained network throughput as it avoids large tx bursts that lead to
local interface tx or network drops.
By default the pacer is disabled. To enabled it for tcp, add tx-pacing
to tcp's startup conf. We are still slightly inefficient in the handling
of incoming packets in established state so the pacer slightly affect
maximum throughput in low lacency scenarios.
Change-Id: Id445b2ffcd64cce015f75b773f7d722faa0f7ca9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Patch is too large to be ported to 18.10 just days before release.
- handle fast retransmits outside of established node and limit the
retransmit burst size to avoid tx losses and worsening congestion.
- in the absance of a tx pacer, use slow start after fast retransmit
exists
- add fast retransmit heuristic that re-retries sending the first
segment if everything else fails
- fine tuning
Change-Id: I84a2ab8fbba8b97f1d2b26584dc11a1e2c33c8d2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I1be7c59df7b48875f81ebeebf5f39ed15a43d2d8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- ensure session enqueue epoch does not wrap between two enqueues
- use 3 states for echo clients app, to distinguish between starting and
closing phases
- force tcp fin retransmit if out of buffers while sending a fin
Change-Id: I6f2cab46affd1148aba2a33fb6d58bcc54f32805
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icff3d688506e7658330db004c58bcfcac273fcec
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I89e8052f2d2c36dd3de5255c4ee570722dc58227
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0573d0aff39581bba96e610228a10ae923a8ca06
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Also add single loop prefetch in session tx
Change-Id: Ib2725a2552fcc1a65050d7a2eb10491a7b34db62
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- cache and reuse tcp options and rcv_wnd for session layer tx bursts
- avoid reading/setting total_length_not_including_first_buffer. It's
part of a buffer's second cache line so it comes at a "cost".
Change-Id: Id18219c2f7e07cf4c63ee74f9cdd9e5918904036
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- sprinkle statics for functions
- move some inlines from header files to corresponding .c files
- replace some always_inlines with statics where inlining is not
performance critical
Change-Id: I371dbf63431ce7e27e4ebbbdd844a9546a1f1849
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I28d3c31bdc4255a4ca223d80bcf44709fb39f4ed
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Idf17a0633a1618b12c22b1119e40c2e9d3192df9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I35508d5251633396393f52842d1b58bc1c1463f6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Cleanup session state after last ack and avoid using a cleanup timer.
- Change session cleanup to free the session as opposed to waiting for
delete notify.
- When in close-wait, postpone sending the fin on close until all
outstanding data has been sent.
- Don't flush rx fifo unless in closed state
Change-Id: Ic2a4f0d5568b65c83f4b55b6c469a7b24b947f39
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3f36e5760fd2935cc29d22601d4c0a1d2a22ba84
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- fix newreno cwnd computation
- reset snd_una_max on entering recovery
- accept acks beyond snd_nxt but less than snd_congestion when in
recovery
- avoid entering fast recovery multiple times when using sacks
- avoid as much as possible sending small segments when doing fast
retransmit
- more event logging
Change-Id: I19dd151d7704e39d4eae06de3a26f5e124875366
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I6615bb612bcc3f795b5f822ea55209bb30ef35b5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I37705fb572045f42be4c2dabbd8460c8f8872167
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Add a session process node that handles main thread tx and retransmit in
order to avoid having a polling input node.
Change-Id: I3357e987c023a84b533b32793e37ab4204420f64
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9ede6bc861350c7d9e78fa4d96cd584c2816d06f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I1c8a14d4d51aa730f0edcf491e3c4725e2d8bd66
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9ab11ba9f958c679112eb22c8db39cb269a29dc7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I373cc252df3621d44879b8eca70aed17d7752a2a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Idef3c665580c13d72e99f43d16b8b13cc6ab746f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
It consists of two main parts. First, add an application transport type
whereby applications can offer transport to other applications. For
instance, a tls app can offer transport services to other applications.
And second, a tls transport app that leverages the mbedtls library for
tls protocol implementation.
Change-Id: I616996c6e6539a9e2368fab8a1ac874d7c5d9838
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I853386aebfe488ebb10328435b81b6e3403c5dd0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixed a typo in tcp_push_header(). The typo only kicks in when the macro
VLIB_BUFFER_TRACE_TRAJECTORY is enabled.
Change-Id: I62832a4932ec5b14e3063d5eac113780851aae59
Signed-off-by: Steven <sluong@cisco.com>
|
|
- compute session type out of transport and network protos
- make session, session lookup and session queue code network protocol
agnostic
This does not update the session layer to support non-ip network layer
protocols
Change-Id: Ifc2f92845e158b649d59462eb7d51c12af536691
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I67a73e31bda9e497859297fcc1765e880572884a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- add debugging scaffolding for simulating buffer shortage
Change-Id: Ice519d74f9c4e4094c4586c548185135b7bb5f2d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Applications are now provided the option to select the namespace they
are to be attached to and the scope of their attachement. Application
namespaces are meant to:
1) constrain the scope of communication through the network by
association with source interfaces and/or fib tables that provide the
source ips to be used and limit the scope of routing
2) provide a namespace local scope to session layer communication, as
opposed to the global scope provided by 1). That is, sessions can be
established without assistance from transport and network layers.
Albeit, zero/local-host ip addresses must still be provided in session
establishment messages due to existing application idiosyncrasies. This
mode of communication uses shared-memory fifos (cut-through sessions)
exclusively.
If applications request no namespace, they are assigned to the default
one, which at its turn uses the default fib. Applications can request
access to both local and global scopes for a namespace. If no scope is
specified, session layer defaults to the global one.
When a sw_if_index is provided for a namespace, zero-ip (INADDR_ANY)
binds are converted to binds to the requested interface.
Change-Id: Ia0f660bbf7eec7f89673f75b4821fc7c3d58e3d1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- always use 'va_args' as pointer in all format_* functions
- u32 for all 'indent' params as it's declaration was inconsistent
Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
- add separate TIME_WAIT time constant
- fix output node for TIME_WAIT acks
- ensure snd_nxt is snd_una_max after retransmitting fin
- debugging improvements
Change-Id: Ic947153346979853f2526824b229126e47aead86
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I2cf4c4850b9c3c093a7dce0cec89b9f710f69393
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I365c31607332a944ef498369881332b515894ed7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- add preallocated segment flag
- don't remove pre-allocated segments except if application detaches
- when preallocating fifos in multiple segments, completely fill
a segment before moving to the next
- detach server application from segment-managers when deleting app
- batch syn/syn-ack/fin (re)transmissions
- loosen up close-wait and time-wait times
Change-Id: I412f53ce601cc83b3acc26aeffd7fa2d52d73b03
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Use buffer pre_data and existing buffer trace trajectory code to
find out dpdk buffer leakages.
Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- do not scale syn-ack window
- fix the max number of outstanding syns in builtin client
- fix syn-sent ack validation to use modulo arithmetic
- improve retransmit timer handler
- fix output buffer allocator leakeage
- improved debugging
Change-Id: Iac3bc0eadf7d0b494a93e22d210a3153b61b3273
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Simply call pool_init_fixed(...) before using the pool. Note that
fixed, preallocated pools live in individually-mmap'ed address
segments, except for the free element bitmap. A large fixed pool can
exceed 4gb.
Fix tcp buffer allocator leak, remove broken assert
Change-Id: I4421082e12a77c41c6e20f7747f3150dcd01fc26
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Additionally, flush rx fifos for closed sessions.
Change-Id: If2cc563fbda0451e7572650e98b15f0a694a0ff9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- set session state as closed on session manager delete
- enable retransmit as opposed to persist timer after persist timer completes
- properly discard buffer chain bytes when new data overlaps ooo
segments
- don't use rxt bytes in snd space estimate used on tx path
Change-Id: Id9cab686e532e5fe70c775d5440260e8eb890a9f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0e22c85ea570b934b9c78dc5e86d86d690bdae5e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia6dd5e948b17b2f3866fe70838eabb09e35415e1
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I58089d7a9867ede9d8a36b2aea62edef04cb5b81
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Fix tcp/udp sw checksum computation
- Fix allocation of multi buffer tcp segments for retransmits
- Send FIN only if/when tx fifo is empty
Change-Id: I2e43a14b87a72c9e547b4339b9a51811cf5732c4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Make tcp output buffer allocation macro an inline function
- Use per ip version per thread tx frames for retransmits and timer
events
- Fix / parameterize tcp data structure preallocation
- Add a couple of gdb-callable show commands
- Fix local endpoint cleanup
Change-Id: I67b47b7570aa14cb4634b6fd93c57cd2eacbfa29
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Also fixes csum computation for lisp control plane 4o6 encapsulated control
messages.
Change-Id: I991e0b5c0d16dc51e0b5bdc79e1d752270b34765
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Cleanup half-open connections and timers on the right thread
- Ensure half-open connection and transport endpoint pools are thread safe
- Enqueue TX events to the correct vpp thread in the builtin client
- Use transport proto in transport connections instead of session type
Change-Id: Id13239a206afbff6f34a38afa510fe014e4b2049
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Increment rcv_nxt for fin packets
- Call tcp_segment_rcv only if buffer has data
- Parse rcv opts before deleting half-open connection
- Fix initial rcv_wnd
- Improved event logging
Change-Id: I9b83c04f432c4cec832c480b03e534deff02c3b1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|