Age | Commit message (Collapse) | Author | Files | Lines |
|
Use what was provided instead of tc->bytes_acked
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0ed736d2ee247e231fccdf4a969fcf6bc15b7978
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I196ee5f4630cec637245493f370b5f83a939fe44
|
|
If running without sacks, if snd_una does not cover snd_congestion fast
recovery can be missed but the two heuristics from RFC6582 should avoid
that.
Also snd_congestion was used as a means of inferring if the connection
recently exited congestion while setting the persist timer but that does
not always work correctly if not congested.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I94d4ac738cdd4f7f23f62e97dd63059de1cd4af9
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1abff943f3fe3ff0219126b5b8beded4ad859758
|
|
If app was idle update start time of current congestion avoidance phase
unless tcp connection was not idle.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idf6a03a9ef96c409462de9f9cb19df609f730afe
|
|
Stay in fast recovery only if it's already on.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idcdbbacfed3e5f3c991fa293c532be1c671f5217
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5838e4c370d0c02a21b5eadb4af3baae781df097
|
|
Should estimated cwnd better with loss
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idd75d40dbab212ac0a5d533009c5540b1a58f4c4
|
|
tc->rto * TCP_TO_TIMER_TICK can return garbage if not cast to u32 and
that confuses clib_max
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
signed-off-by: Vipul Agrawal <Vipul.Agrawal@enea.com>
Change-Id: Ief4d29b9625e2ef2e75e0c7e3d731ab147465f6d
|
|
Make it shorter to type, easier to debug, make adding callbacks in
future simpler.
Type: improvement
Change-Id: I6cdd6375e36da23bd452a7c7273ff42789e94433
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
the receive dpo added by tcp src-address cli do not have a valid sw_if_index ,
ip4_local_check_src() and tcp_input_lookup_buffer() will set ~0 to vnet_buffer(b)->sw_if_index[VLIB_RX],
which will cause crash in tcp46_reset_inline,
Type: fix
Signed-off-by: Mercury <mercury124185@gmail.com>
Change-Id: Ie01c31f3575e14187c6380ebcfff96fcb6098cde
|
|
fix ipv4 key uninitialized in local_endpoints_table,
which will cause transport_endpoint_cleanup() failed
to lookup the endpoint and can not delete it,
as for ipv6, clib_memcpy_fast() will change all bytes of lcl_addr
and there maybe no need to initalize,
Type: fix
Signed-off-by: Mercury <mercury124185@gmail.com>
Change-Id: I56676493a393b1d64eaa438224e256094ca75d2f
|
|
When the src-address to add match a route
without a valid output interface(such as default route 0.0.0.0/0),
fib_entry_get_resolving_interface() will return (u32)~0,
which will cause crash in ip4_neighbor_proxy_enable().
Type: fix
Signed-off-by: Mercury <mercury124185@gmail.com>
Change-Id: I5aee5676a2ff43ec06745ebed4dba2b9e5b98c4d
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I43f6bfa028ee37227f27a2fe0303662bf2631b10
|
|
Use vectorized buffer translate function and refactor tracing.
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5a014cea1a753eb10a564ac316c1727a18f884ff
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I35c1fc75df065398821cc275e853a3caa9db94c2
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2a5de36175bca1181ffd4a1865d41f0a1f6bc035
|
|
Also does a bit of code cleanup.
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifbff1e03a2e1fdca98925fdd3db7eb230ff24a37
|
|
May not be valid error but gcc-11 complains.
Type: fix
Change-Id: I207b8b4966c5eadd534495e29c873663249a377f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id58ac44d45fb8b8a0d803f02e0242ec6f4b3db05
|
|
This patch provides a fix for early-kill of timewait sockets that is based on
rfc's 1122, 6191.
The following commits provided a solution for port re-use. However, they
are not fully compliant with rfc 1122 4.2.2.13 ( Closing a connection )
and rfc 6191 (Reducing the TIME-WAIT State Using TCP Timestamps)
commit b092b77cf238ba ("tcp: Enable TCP timewait port use") introduced
a significant improvement by enabling TCP timewait port re-use.
commit ee1cb469b2dd ("tcp: fix port reuse with multiple listeners") fixed
usage of the wrong value for connection_index when searching for a
listener, by storing the state in tcp.flags.
Implementation details:
When a SYN is received during time-wait state, the code
checks whether all the requirements for accepting the SYN packet are
met. If they aren't, the SYN can't be accepted and the packet is dropped,
otherwise, connection is deleted and a new connection with same port
is opened.
Type: fix
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Yuval Caduri <cyuval@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Change-Id: I38a33c6e321c760d45ebec9154399e1c90dd0250
|
|
Type: improvement
This adds a new ip[46]-receive node, sibling
of ip[46]-local. Its goal is to set
vnet_buffer (b)->ip.rx_sw_if_index to the
sw_if_index of the local interface.
In dependant nodes further down the line (e.g.
hoststack) we then set sw_if_idx[rx] to this
value. So that we know which local interface
did receive the packet.
The TCP issue this fixes is that :
On accepts, we were setting tc->sw_if_index
to the source sw_if_index. We should use
the dest sw_if_index, so that packets
coming back on this connection have the
right source sw_if_index. And also setting
it in the tx-ed packet.
Change-Id: I569ed673e15c21e71f365c3ad45439b05bd14a9f
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe39bc045c3b154209a83b59ef95a37c61b32c0c
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id0e67a9ce9c5d8bca2cd7a30493f03a02a46dc46
|
|
Type: refactor
Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ief06b1509d31b55efc8d1436b6ff9e01c6037a32
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I05be39671a9ed0688d4e006f0f9354aa6560a41b
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4b3427b966f9ff1ba8895fed7db662d56650f3f5
|
|
According to RFC 793, the ACK control bit is always sent once
the connection is established.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: Id0fe19114a0cc468dbce4c0938b345c2ac339e73
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I3c06e9cb3fabdcdce9c17e93cfedfd771295f589
|
|
In the current implement, tcp would start or up an one tick
retransmit timer for that connection if vlib_buffer_alloc()
return 0. Now the tick is 0.1ms, this means that if VPP is
in a buffer shortage state, there would be a large number of
burst timer expirations.
This commit limits the minimum interval of the retransmission
timer to 100ms.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: Ia11d693fe46119c5dc16b24ca93c30c31109057a
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I338e61654a62ed6308ecd8bb15e1a8b13cd859b9
|
|
Half-open sessions are allocated by main thread and cleaned up on main
with timers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I37f000920a45908b62b5501ae9d54a88a9e4c609
|
|
Some app(e.g. Envoy) may call shutdown() instead of close() when
draining connection.
Type: improvement
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I9543b9ca3caa87b10b134fd1fc4019124e41e4d2
|
|
Use half-open sessions to track virtual circuit connection
establishment. These sesssions can only be allocated and freed by the
thread that allocates half-open connections (main). Consequently, they
can only be freed on half-open cleanup notifications from transports.
Goal is to simplify state tracking within the session layer but it's
also a first step towards allowing builtin apps to track and cleanup
outstanding connects.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8a535906d13eb7f8966deb82333839de80f8049f
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2ca8a5e30e55a84d4567422e4b7fcf90830921d3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2d11b1411a7653b94fddd889a5f28640c5f5566c
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idb286e77a877a6a60aa532263277f002fc002e48
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic37f640b7f0d0a041c003e76c8f29c21b5e664b3
|
|
trajectory trace has been broken for a while because we used to save the
buffer trajectory in a vector pointed to in opaque2. This does not work
well when opaque2 is copied (eg. because of a clone) as 2 buffers end up
sharing the same vector.
This dedicates a full cacheline in the buffer metadata instead when
trajectory is compiled in. No dynamic allocation, no sharing, no tears.
Type: refactor
Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ieb5af96de5be33356dbab7bc4ab4696731fa8866
|
|
Optimize connection size and move timestamp_delta closer to other
timestamp related members.
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iec42efb46482ebfdf234518a4e91af836e4f4c07
|
|
If fifo full, default to requesting an app deq notification and forcing
an ack (window update) if zero rcv window sent is still active.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iade7e1722503da149c62c465c472edbb0a5599f7
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I94b8063c9d8f9b811589c6815cb5c8ca6220f2b5
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifdd6024daf044751895bb8d2deabad41d3a80c92
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I998c0686f9f7dc556dda8b28e23bbed127d0aafc
|
|
Type: improvement
Change-Id: I1152e58d7bfcb3c4347147f87a834d45ad51cdfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: If3da7d4338470912f37ff1794620418d928fb77f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
This patch adds flags to represent the modern NICs capabilities.
Change-Id: I96d38d9ab7eac55974d72795cd100d8337168e1e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I24225ada6623c5b5543341ecac0d6c1db43cc8a9
|