summaryrefslogtreecommitdiffstats
path: root/src/vnet/unix/tapcli.c
AgeCommit message (Collapse)AuthorFilesLines
2019-01-25deprecate tapcliDamjan Marion1-1552/+0
Change-Id: I82dceaa27a7b0c96de077cf283e4f64aa426f271 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-01buffers: remove unused codeDamjan Marion1-5/+2
Change-Id: If2bbfbc52994f5de0879763e0b7a7864498debb6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-13vlib rename vlib_frame_args(...) to vlib_frame_scalar_args(..)Damjan Marion1-2/+2
Typically we have scalar_size == 0, so it doesn't matter but vlib_frame_args was providing pointer to scalar frame data, not vector data. To avoid future confusion function is renamed to vlib_frame_scalar_args(...) Change-Id: I48b75523b46d487feea24f3f3cb10c528dde516f Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-11-08vnet: store hw interface speed in kbps instead of using flagsDamjan Marion1-4/+2
Change-Id: Idd4471a3adf7023e48e85717f00c786b1dde0cca Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-10-23c11 safe string handling supportDave Barach1-7/+7
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-15VPP-1341: fix loopback interface graph arcsDave Barach1-1/+1
Remove broken special case from l2_input.c:set_int_l2_mode(), which turns out to confuse the graph dispatch engine. The loopback TX function needs to push packets to either ethernet-input or to l2-input, based on bridge / BVI configuration. Rather than overloading a single graph arc - and making vain attempts to reconfigure it - create both arcs and use the correct one. Rewrote the loopback tx function as an idosyncratic multi-arch quad/single loop fn. Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-11avoid using thread local storage for thread indexDamjan Marion1-2/+2
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-06-11MTU: Software interface / Per-protocol MTU supportOle Troan1-2/+1
This patch separates setting of hardware interfaec and software interface MTU. Software MTU is L2 payload MTU (i.e. not including L2 header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set. Currently only IP4, IP6 are enabled in adjacency / rewrite code. Documentation in src/vnet/MTU.md Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion1-3/+2
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan1-2/+3
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2017-12-11VPP-273 Coding standards cleanup - vnet/vnet/unixsharath reddy1-428/+495
Change-Id: Ibac5a4588e66f6d3ad42dd2583e1e84b7d2314c4 Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
2017-12-04tapcli: change interface nameDamjan Marion1-1/+1
As tapcli code is going to be deprecated and replaced with tap v2 code, change the interface naming so the new code can use form tap-X. Change-Id: I2684a880c037caee677927214752c00cf97f63f6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-10-06tuntap: Introduce per thread structure to suport multi-threadsSteven1-34/+56
https://gerrit.fd.io/r/#/c/8551/ decoupled the global variable, namely tm->iovecs from TX and RX. However, to support multi-threads, we have to eliminate the use of this global variable with per thread variable. I notice that rx_buffers must also be per thread variable. So, we introduce per thread struct to contain rx_buffers and iovecs. Each thread will find the per thread struct with thread_index. Change-Id: I61abf2fdace8d722525a382ac72f0d04a173b9ce Signed-off-by: Steven <sluong@cisco.com>
2017-09-28tun/tap: Bad packets sent to kernel via tun/tap interfaceSteven1-11/+14
It was observed that under heavy traffic, VPP accidentally sent traffic with the wrong source and destination to the tun/tap interface. Traffic appears to be sent to the wrong direction. This problem is only seen when worker thread is configured. When worker thread is used, TX and RX may reside in different core. Yet both TX and RX threads are sharing the same global variable, namely iovecs without any mutex or memory barrier protection. This creates a race condition when heavy traffic is blasted to VPP, like 1000 pps. We could create a mutex or memory barrier to ensure atomic memory access. But why bother? It is a lot cheaper to just decouple the iovecs such that TX and RX have their own iovecs. Change-Id: I86a5a19bd8de54d54f32e1f0845bae6a81bbf686 Signed-off-by: Steven <sluong@cisco.com>
2017-09-09move unix_file_* code to vppinfraDamjan Marion1-11/+8
This will allow us to use this code in client libraries without vlib. Change-Id: I8557b752496841ba588aa36b6082cbe2cd1867fe Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-04-06Use thread local storage for thread indexDamjan Marion1-1/+1
This patch deprecates stack-based thread identification, Also removes requirement that thread stacks are adjacent. Finally, possibly annoying for some folks, it renames all occurences of cpu_index and cpu_number with thread index. Using word "cpu" is misleading here as thread can be migrated ti different CPU, and also it is not related to linux cpu index. Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-10VPP-659 TCP improvementsFlorin Coras1-1/+2
- builtin test echo server - fix SYN-ACK retransmit canceling - avoid sending spurious ACK if in LAST_ACK - improved client dummy test app - renamed tx fifo dequeuing and sending functions to avoid confusion - improved RST handling Change-Id: Ia14aad3df319540dcf6e6a4e18a9f8d423a4b83b Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-06features: take device-input buffer advance value directlyDamjan Marion1-2/+1
Change-Id: Ifac7d9134d03d79164ce6f06ae9413279bbaadb3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall1-17/+40
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-20Fix coverity warning, VPP-608Dave Barach1-0/+3
Change-Id: I1086debdf90a51205af17c35e93cd9aeff598135 Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-18Fix coverity warnings, VPP-608Dave Barach1-2/+3
Change-Id: Ib0144ba3a9a09971d3946c932e8fed6d5c1ad278 Signed-off-by: Dave Barach <dave@barachs.net>
2017-01-14Provision linux stack ip4 and ip6 addresses for tap interfacesDave Barach1-72/+186
To simplify system configuration. Converted existing code to use an argument structure, instead of [one or two too many] discrete parameters. Change-Id: I3eddfa74eeed918c1b04a6285fba494651594332 Signed-off-by: Dave Barach <dave@barachs.net>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+1328
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>