aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/vxlan-gbp
AgeCommit message (Collapse)AuthorFilesLines
2020-06-09vxlan: fix the inner packet checksum calculationMohsin Kazmi1-2/+50
Type: fix Change-Id: I1da4ace9f3e548af4b5b3373d695e4214c5df2ff Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-28tests: move defaults from defaultmapping to .api filesPaul Vinciguerra1-1/+1
facilitates use of papi beyond the tests. Type: improvement Change-Id: I3d502d9130b81a7fb65ee69bb06fe55802b28a27 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-02-25vlib: Punt reason allocation listener enable/disable callbackNeale Ranns1-0/+2
Type: improvement allow clients that allocate punt reasons to pass a callback function that is invoked when the first/last client registers to use/listen on that punt reason. This allows the client to perform some necessary configs that might not otherwise be enabled. IPSec uses this callback to register the ESP proto and UDP handling nodes, that would not otherwise be enabled unless a tunnel was present. Change-Id: I9759349903f21ffeeb253d4271e619e6bf46054b Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-18misc: fix coverity warningsDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
2020-02-17misc: fix coverity warningsDave Barach1-1/+1
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b) check the indicated condition in production images. As in: p = hash_get(...); ALWAYS_ASSERT(p) /* was ASSERT(p) */ elt = pool_elt_at_index(pool, p[0]); This may not be the best way to handle a specific case, but failure to check return values at all followed by e.g. a pointer dereference isn't ok. Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
2020-01-03vxlan-gbp: api cleanupJakub Grajciar1-11/+11
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I26bd57ba506165bf2dd574fa39a81adc4295d796
2020-01-03nat: use SVRKlement Sekera1-0/+1
Remove NAT's implementation of shallow virtual reassembly with corresponding CLIs, APIs & tests. Replace with standalone shallow virtual reassembly provided by ipX-sv-reass* nodes. Type: refactor Change-Id: I7e6c7487a5a500d591f6871474a359e0993e59b6 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-12-20vxlan: reuse inner packet flow hash for tunnel outer header load balanceShawn Ji1-0/+7
Type: fix Several tunnels encapsulation use udp as outer header and udp src port is set by inner header flow hash, such as gtpu, geneve, vxlan, vxlan-gbd Since flow hash of inner header is already been calculated, keeping it to vnet_buffere[b]->ip.flow_hash should save load-balance node work to select ECMP uplinks. Change-Id: I0e4e2b27178f4fcc5785e221d6d1f3e8747d0d59 Signed-off-by: Shawn Ji <xiaji@tethrnet.com>
2019-12-17vxlan geneve gtpu: fix short helpPaul Vinciguerra1-1/+1
Type: fix Change-Id: Id53eb6ed15f270d747b9831a7b585cbafe515dd2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-11-26fib: reduce save_rewrite_length to u8Klement Sekera1-1/+1
This is a preparation step for migrating NAT to use SVR (shallow virtual reassembly) to conserve space in vnet_buffer. Since max rewrite length is currently pre-data size (128), u8 is sufficient to hold that value. Type: refactor Change-Id: I5374bb396e178245b870cb0bbf1370d2a54230bc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-08-05vxlan: fix VXLANoIP6 checksum offload setupJohn Lo1-3/+3
Fix UDP over IP6 checksum offload setup for VXLAN and VXLAN-GBP. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: If110467a68234d8eed941869a2a03735f339dc33
2019-07-19fib: FIB Entry trackingNeale Ranns1-8/+7
Instead of all clients directly RR sourcing the entry they are tracking, use a deidcated 'tracker' object. This tracker object is a entry delegate and a child of the entry. The clients are then children of the tracker. The benefit of this aproach is that each time a new client tracks the entry it doesn't RR source it. When an entry is sourced all its children are updated. Thus, new clients tracking an entry is O(n^2). With the tracker as indirection, the entry is sourced only once. Type: feature Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-07-05vxlan-gbp: Decap ignores reserved bitsNeale Ranns2-18/+22
Type: fix from the draft: 3. Backward Compatibility VXLAN [RFC7348] requires reserved fields to be set to zero on transmit and ignored on receive. Change-Id: I98544907894f1a6eba9595a37c3c88322905630e Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-26api: initialize sw_if_index earlier in vxlan_gbp_tunnel_add_delPaul Vinciguerra1-1/+1
In the case of an error, it is uninitialized. Type: fix Change-Id: Ib88fb997e5eef410c1cd970674d9385575f30366 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-20api: fix return code in vxlan_gbp_tunnel_add_delPaul Vinciguerra1-1/+1
Return VNET_API_ERROR_INVALID_VALUE intead of 1. Type: fix Change-Id: Ie5465cad9ca07b9147306a808e8b13d0c4867913 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-18fib: fib api updatesNeale Ranns1-4/+4
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-05-29vxlan-gbp: prefetch encap header memory areaZhiyong Yang1-66/+70
This patch helps save 4.1 clocks/pkt from 62.9 to 58.8 clocks/pkt on Skylake. Change-Id: I749a88a8fa6c78243441a89d6afcd04f106af3da Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-16init / exit function orderingDave Barach1-6/+7
The vlib init function subsystem now supports a mix of procedural and formally-specified ordering constraints. We should eliminate procedural knowledge wherever possible. The following schemes are *roughly* equivalent: static clib_error_t *init_runs_first (vlib_main_t *vm) { clib_error_t *error; ... do some stuff... if ((error = vlib_call_init_function (init_runs_next))) return error; ... } VLIB_INIT_FUNCTION (init_runs_first); and static clib_error_t *init_runs_first (vlib_main_t *vm) { ... do some stuff... } VLIB_INIT_FUNCTION (init_runs_first) = { .runs_before = VLIB_INITS("init_runs_next"), }; The first form will [most likely] call "init_runs_next" on the spot. The second form means that "init_runs_first" runs before "init_runs_next," possibly much earlier in the sequence. Please DO NOT construct sets of init functions where A before B actually means A *right before* B. It's not necessary - simply combine A and B - and it leads to hugely annoying debugging exercises when trying to switch from ad-hoc procedural ordering constraints to formal ordering constraints. Change-Id: I5e4353503bf43b4acb11a45fb33c79a5ade8426c Signed-off-by: Dave Barach <dave@barachs.net>
2019-04-03GBP: iVXLAN reflection checkNeale Ranns3-4/+26
packets should not egress on an iVXLAN tunnel if they arrived on one. Change-Id: I9adca30252364b4878f99e254aebc73b70a5d4d6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28Punt InfraNeale Ranns3-7/+43
A punt/exception path that provides: 1) clients that use the infra 2) clients can create punt reasons 3) clients can register to recieve packets that are punted for a given reason to be sent to the desired node. 4) nodes which punt packets fill in the {reason,protocol} of the buffere (in the meta-data) and send to the new node "punt-dispatch" 5) punt-dispatch sends packets to the registered nodes or drops Change-Id: Ia4f144337f1387cbe585b4f375d0842aefffcde5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28VXLAN-GBP: format flags in encap traceNeale Ranns1-2/+3
Change-Id: I561fd187b4865345f3bff86b3d6e67b0f0e97557 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-1/+1
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-27GBP: fixes for l3-out routingNeale Ranns2-1/+32
Change-Id: I4d73b712da911588d511a8401b73cdc3c66346fe Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-26Simplify adjacency rewrite codeBenoît Ganne1-18/+5
Using memcpy instead of complex specific copy logic. This simplify the implementation and also improve perf slightly. Also move adjacency data from tail to head of buffer, which improves cache locality (header and data share the same cacheline) Finally, fix VxLAN which used to workaround vnet_rewrite logic. Change-Id: I770ddad9846f7ee505aa99ad417e6a61d5cbbefa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-06vxlan*: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar2-37/+24
Change-Id: Ide23bb3d82024118214902850821a8184fe65dfc Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-03-06GBP: learn from ARP and L2 packetsNeale Ranns1-2/+0
Change-Id: I8af7bca566ec7c9bd2b72529d49e04c6e649b44a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-03-05VXLAN-GBP: decap checks src,dst&VNI for unicast, then checks only dst&VNI ↵Neale Ranns2-71/+62
for multicast Change-Id: I17caf3c5a2060de497c44655b66a15a2007f716b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-22GBP: Sclass to src-epg conversionsNeale Ranns2-9/+9
Change-Id: Ica88268fd6a6ee01da7e9219bb4e81f22ed2fd4b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-10ARP/ND: copy opaque2 persistent fields to new packetNeale Ranns1-2/+8
Change-Id: Ic65f686aaccaf8450732d88d7471b587faccaa9d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-15VXLAN-GBP: c-n-p error in the dual-loop tracingNeale Ranns1-1/+1
Change-Id: I3722a1850f7a72e4382e351120c1514d7a1759b8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-6/+9
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-07GBP Endpoint LearningNeale Ranns7-104/+252
Learning GBP endpoints over vxlan-gbp tunnels Change-Id: I1db9fda5a16802d9ad8b4efd4e475614f3b21502 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-10-26vxlan-gbp: On demand udp ports registrationMohsin Kazmi2-5/+44
Change-Id: I3a47c71ad3e35df47d11fed6db95019a45f3015f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-10-23c11 safe string handling supportDave Barach3-5/+5
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra4-10/+10
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-12VXLAN-GBP: use common types on the APINeale Ranns4-81/+73
Change-Id: I11ec0d7048d36c30a97d437e5b0abd05f06ab0eb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-10vxlan-gbp: Add support for vxlan gbpMohsin Kazmi9-0/+3407
This patch implements vxlan with extension of group based policy support. Change-Id: I70405bf7332c02867286da8958d9652837edd3c2 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>