| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Modify interface creation to allow creation of tunnel interfaces
without dedicated per tunnel output and tx nodes which are not
used for most tunnel types. Also changed interface-output node
function vnet_per_buffer_interface_output() so it does not rely
on hw_if_index as the next node index which is not flexible nor
efficient for large scale tunnel interfaces.
The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU
tunnels. GRE tunnel is still using per tunnel output nodes which
will be changed in a separate patch with other GRE enhencements.
Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55
Signed-off-by: John Lo <loj@cisco.com>
|
|
Improve "show xxx tunnel" output functions format_xxx_tunnel() for
GRE, VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels to make their output
more consistent and provide better information.
Improved the output of "show int addr" to make its info more
consistent with tunnels and provide fib-index info.
Change-Id: Icd4b5b85a5bec417f8ee19afea336c770ad3b4c5
Signed-off-by: John Lo <loj@cisco.com>
|
|
Move the functions hash_set_key_copy() and hash_unset_key_free()
which are dupilicated in various tunnel support code modules to
hash.h as hash_set_mem_alloc() and hash_unset_mem_free() to be
used by all.
Change-Id: I40723cabe29072ab7feb1804c221f28606d8e4fe
Signed-off-by: John Lo <loj@cisco.com>
|
|
The "test-all" target is still never called as part of any continuous
test (as it probably should) but at least it can now be expected to
succeed.
VXLAN-GPE:
* decapsulate Ethernet to "l2-input" instead of "ethernet-input"
otherwise the inner mac address get checked against the interface one
(external) and packet gets dropped (mac mismatch)
* set packet input sw_if_index to unicast vxlan tunnel for learning
TEST:
* VXLAN:
* reduce the number of share tunnels:
=> reduce test duration by half
=> no functional change
* VXLAN-GPE:
* fix test TearDown() cli: command is "show vxlan-gpe" only
* remove vxlan-gpe specific tests as the were a duplicated of the
BridgeDomain one and already inherited.
* disable test_mcast_rcv() and test_mcast_flood() tests
* P2PEthernetAPI:
* remove test: "create 100k of p2p subifs"
there already is a "create 1k p2p subifs" so this one is a load test
and not a unit test.
See: lists.fd.io/pipermail/vpp-dev/2017-November/007280.html
Change-Id: Icafb83769eb560cbdeb3dc6d1f1d3c23c0901cd9
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I3255cd1be4ae4ec8d09574183c96f59028374a5e
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ifabb8d22d20bc1031664d5f004e74cd363759ab6
Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
|
|
Saves memory at no appreciable performance cost.
before:
DBGvpp# sh fib mem
FIB memory
Name Size in-use /allocated totals
Entry 80 7 / 150 560/12000
after:
DBGvpp# sh fib mem
FIB memory
Name Size in-use /allocated totals
Entry 72 7 / 7 504/504
Change-Id: Ic5d3920ceb57b54260dc9af2078c26484335fef1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
[support for VPWS/VPLS]
- switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths
- VLIB nodes to handle pop/push of MPLS labels to L2
Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2a75357d49a971818c8d96d56d184c5d01fbc775
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I6b19634ecb03860a7624d9408e09b52e95f47aef
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I0324f945bdb4dd3b19151be6f3ce24a47a000104
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
- inline the FIB lookup function; this requires access to the bihash, so for files that use more than one type this casues problems. those files that include ip6_fib.h unnecessarily have been updated
- better use of the feature arcs. ip6-lookup and interface-output are now sentinels (end-node-index in the cm speak) rather than enabled features.
Change-Id: I9d1375fee63f7dbb2d327da6124d8e60b63367ec
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
In the CLI parsing, below is a common pattern:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "x"))
x = 1;
:
else
return clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
}
unformat_free (line_input);
The 'else' returns if an unknown string is encountered. There a memory
leak because the 'unformat_free(line_input)' is not called. There is a
large number of instances of this pattern.
Replaced the previous pattern with:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
{
if (unformat (line_input, "x"))
x = 1;
:
else
{
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
goto done:
}
}
/* ...Remaining code... */
done:
unformat_free (line_input);
return error;
}
In multiple files, 'unformat_free (line_input);' was never called, so
there was a memory leak whether an invalid string was entered or not.
Also, there were multiple instance where:
error = clib_error_return (0, "unknown input `%U'",
format_unformat_error, line_input);
used 'input' as the last parameter instead of 'line_input'. The result
is that output did not contain the substring in error, instead just an
empty string. Fixed all of those as well.
There are a lot of file, and very mind numbing work, so tried to keep
it to a pattern to avoid mistakes.
Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
John Lo
Gabriel Ganne
Swarup Nayak
sharath reddy
Neale Ranns
Hongjun Ni
Billy McFall
Damjan Marion