summaryrefslogtreecommitdiffstats
path: root/src/vnet/vxlan-gpe/vxlan_gpe.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-21fib: respect mfib entry flags on create with pathsPaul Atkins1-7/+6
When an mfib entry was created with both paths and entry_flags then the entry flags were being ignored. If there are no paths then the flags were passed into mfib_table_entry_update, but in the case where the entry didn't exist and there were paths and flags, the entry was created within mfib_table_entry_paths_update() which used a default of MFIB_ENTRY_FLAG_NONE. Pass the flags through into the mfib_table_entry_paths_update fn. All existing callers other than the create case will now pass in MFIB_ENTRY_FLAG_NONE. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I256375ba2fa863a62a88474ce1ea6bf2accdd456
2021-10-08vxlan-gpe: add udp-port configuration supportArtem Glazychev1-22/+39
similar behavior as here: 839dcc0fb7313638d9b8f52a9db81350dddfe461 Type: improvement Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Change-Id: I1b0a8f8f3dab48839e27df7065cf5f786cf0b5e9
2021-10-06docs: more nitfixesNathan Skrzypczak1-18/+20
Type: fix Change-Id: I41455e1cdc62e7c0baa148630b0701b042f3b156 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-12-14misc: move to new pool_foreach macrosDamjan Marion1-3/+3
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-10-21misc: minimize dependencies on udp.hFlorin Coras1-0/+1
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
2020-03-03geneve gtpu vxlan vxlan-gpe: VRF-aware bypass nodeNick Zavaritsky1-34/+7
Bypass node MUST NOT intercept a packet if destination IP doesn’t match a local address. However IP address interpretation depends on the VRF, hence bypass node must take that into account. This patch also factors-out common VTEP management and checking code. Type: improvement Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com> Change-Id: I5665d94882bbf45d15f8da140c7ada528ec7fa94
2020-02-18misc: fix coverity warningsDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I402b1b06db736b2a7a242ce70ffd409c7c0a4fc2
2020-02-17misc: fix coverity warningsDave Barach1-1/+1
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b) check the indicated condition in production images. As in: p = hash_get(...); ALWAYS_ASSERT(p) /* was ASSERT(p) */ elt = pool_elt_at_index(pool, p[0]); This may not be the best way to handle a specific case, but failure to check return values at all followed by e.g. a pointer dereference isn't ok. Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
2019-12-17vxlan geneve gtpu: fix short helpPaul Vinciguerra1-1/+1
Type: fix Change-Id: Id53eb6ed15f270d747b9831a7b585cbafe515dd2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-07-19fib: FIB Entry trackingNeale Ranns1-8/+7
Instead of all clients directly RR sourcing the entry they are tracking, use a deidcated 'tracker' object. This tracker object is a entry delegate and a child of the entry. The clients are then children of the tracker. The benefit of this aproach is that each time a new client tracks the entry it doesn't RR source it. When an entry is sourced all its children are updated. Thus, new clients tracking an entry is O(n^2). With the tracker as indirection, the entry is sourced only once. Type: feature Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-5/+5
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-04features will register udp ports once configuredJakub Grajciar1-5/+11
plugins: - ipfixcollector vnet: - geneve - vxlan_gpe - vxlan Change-Id: I69a8b4017ee6990f2b4874fe3e94c4520bde7101 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-05-22vxlan-gpe: fix CLI document errorZhiyong Yang1-3/+3
Change-Id: Id95fd604ed181a2f70c24e2c8cc4321755b7ba7f Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-2/+2
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-23c11 safe string handling supportDave Barach1-2/+2
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-09-25L2 BD: introduce a BD interface on which to send UU packetsNeale Ranns1-2/+2
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra1-5/+5
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-02-01FIB: Consolidate several copies of fib_ip_proto() into one.Jon Loeliger1-6/+0
Rather than having multiple copies of the same function scattered around, promote the function into the FIB PROTOCOL definitions in fib_types.h. Change-Id: I11c4d85931167d3a5f3dc1278afecc8845b23cd7 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-01-24Improve tunnel interface creation performanceJohn Lo1-14/+4
Modify interface creation to allow creation of tunnel interfaces without dedicated per tunnel output and tx nodes which are not used for most tunnel types. Also changed interface-output node function vnet_per_buffer_interface_output() so it does not rely on hw_if_index as the next node index which is not flexible nor efficient for large scale tunnel interfaces. The improvenemts are done for VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels. GRE tunnel is still using per tunnel output nodes which will be changed in a separate patch with other GRE enhencements. Change-Id: I4123c01c0d2ead814417a867adb8c8a407e4df55 Signed-off-by: John Lo <loj@cisco.com>
2018-01-13Improve "show xxx tunnel" and "show int addr" outputJohn Lo1-28/+39
Improve "show xxx tunnel" output functions format_xxx_tunnel() for GRE, VXLAN, VXLAN-GPE, GENEVE and GTPU tunnels to make their output more consistent and provide better information. Improved the output of "show int addr" to make its info more consistent with tunnels and provide fib-index info. Change-Id: Icd4b5b85a5bec417f8ee19afea336c770ad3b4c5 Signed-off-by: John Lo <loj@cisco.com>
2018-01-05Unify and cleanup usage of hash_set/unset_mem by various tunnelsJohn Lo1-29/+16
Move the functions hash_set_key_copy() and hash_unset_key_free() which are dupilicated in various tunnel support code modules to hash.h as hash_set_mem_alloc() and hash_unset_mem_free() to be used by all. Change-Id: I40723cabe29072ab7feb1804c221f28606d8e4fe Signed-off-by: John Lo <loj@cisco.com>
2017-12-13make "test-all" target pass againGabriel Ganne1-1/+1
The "test-all" target is still never called as part of any continuous test (as it probably should) but at least it can now be expected to succeed. VXLAN-GPE: * decapsulate Ethernet to "l2-input" instead of "ethernet-input" otherwise the inner mac address get checked against the interface one (external) and packet gets dropped (mac mismatch) * set packet input sw_if_index to unicast vxlan tunnel for learning TEST: * VXLAN: * reduce the number of share tunnels: => reduce test duration by half => no functional change * VXLAN-GPE: * fix test TearDown() cli: command is "show vxlan-gpe" only * remove vxlan-gpe specific tests as the were a duplicated of the BridgeDomain one and already inherited. * disable test_mcast_rcv() and test_mcast_flood() tests * P2PEthernetAPI: * remove test: "create 100k of p2p subifs" there already is a "create 1k p2p subifs" so this one is a load test and not a unit test. See: lists.fd.io/pipermail/vpp-dev/2017-November/007280.html Change-Id: Icafb83769eb560cbdeb3dc6d1f1d3c23c0901cd9 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-12-13VPP-1099 Fix create vxlan-gpe tunnel local 10::1 remote 20::1 vni 11 (for ipv6)Swarup Nayak1-0/+1
Change-Id: I3255cd1be4ae4ec8d09574183c96f59028374a5e Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
2017-12-13VPP-275 Coding standards cleanup - vnet/vnet/vxlan-gpesharath reddy1-432/+470
Change-Id: Ifabb8d22d20bc1031664d5f004e74cd363759ab6 Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
2017-11-26FIB: store the node type not the function pointer.Neale Ranns1-2/+0
Saves memory at no appreciable performance cost. before: DBGvpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 80 7 / 150 560/12000 after: DBGvpp# sh fib mem FIB memory Name Size in-use /allocated totals Entry 72 7 / 7 504/504 Change-Id: Ic5d3920ceb57b54260dc9af2078c26484335fef1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-08L2 over MPLSNeale Ranns1-1/+1
[support for VPWS/VPLS] - switch to using dpo_proto_t rather than fib_protocol_t in fib_paths so that we can describe L2 paths - VLIB nodes to handle pop/push of MPLS labels to L2 Change-Id: Id050d06a11fd2c9c1c81ce5a0654e6c5ae6afa6e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-08-04Initialize vxlan-gpe bypass modeHongjun Ni1-0/+16
Change-Id: I2a75357d49a971818c8d96d56d184c5d01fbc775 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-06-25VPP crash on creating vxlan gpe interface. VPP-875Hongjun Ni1-0/+3
Change-Id: I6b19634ecb03860a7624d9408e09b52e95f47aef Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-06-06Rework vxlan-gpe to support FIB 2.0 and bypass modeHongjun Ni1-66/+622
Change-Id: I0324f945bdb4dd3b19151be6f3ce24a47a000104 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2017-05-24IPv6 Performance bugsNeale Ranns1-4/+4
- inline the FIB lookup function; this requires access to the bihash, so for files that use more than one type this casues problems. those files that include ip6_fib.h unnecessarily have been updated - better use of the feature arcs. ip6-lookup and interface-output are now sentinels (end-node-index in the cm speak) rather than enabled features. Change-Id: I9d1375fee63f7dbb2d327da6124d8e60b63367ec Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall1-16/+46
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2016-12-28Reorganize source tree to use single autotools instanceDamjan Marion1-0/+659
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23 Signed-off-by: Damjan Marion <damarion@cisco.com>