Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Ie30d51ab4df5599b52f7335f863b930cd69dbdc1
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
|
|
Type: style
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
|
|
This patch aims to improve decap performance by reducing expensive
hash_get callings as less as possible using AVX512 on XEON.
e.g. vxlan, vxlan_gpe, geneve, gtpu.
For the existing code, if vtep4 of the current packet match the last
vtep4_key_t well, expensive hash computation can be avoided and the
code returns directly.
This patch improves tunnel decap multiple flows case greatly by
leveraging 512bit vector register on XEON accommodating 8 vtep4_keys.
It enhances the possiblity of avoiding unnecessary hash computing
once hash key of the current packet hits any one of 8 in the 512bit
cache.
The oldest element in vtep4_cache_t is updated in round-robin order.
vlib_get_buffers is also leveraged in the meanwhile.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: Junfeng Wang <drenfong.wang@intel.com>
Change-Id: I313103202bd76f2dd638cd942554721b37ddad60
|
|
if ((A | B) == false) it means both A and B are false, so for
the following code
if (PREDICT_FALSE (!good_udp1))
{
if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0)
{
...
}
}
if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0) is always
true if the code run it. Remove it.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I6bd1e9340c7a00089fc1c9ae49773add832d309e
|
|
Bypass node MUST NOT intercept a packet if destination IP doesn’t match
a local address. However IP address interpretation depends on the VRF,
hence bypass node must take that into account.
This patch also factors-out common VTEP management and checking code.
Type: improvement
Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com>
Change-Id: I5665d94882bbf45d15f8da140c7ada528ec7fa94
|
|
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I3ef0725684bcb8ea526abe0ce62562b35a0070f5
Signed-off-by: Eyal Bari <ebari@cisco.com>
(cherry picked from commit 0d87894bf279a4678cfca6cc438583090b166f85)
|
|
store local/remote addresses + vrf + vni in hash key
store complete decap info in hash value (sw_if_index + next_index +
error)
this removes the need to access the tunnel object when matching both
unicast and mcast.
however for mcast handling it requires 3 hash lookups:
* one failed unicast lookup (by src+dst addrs)
* lookup by mcast(dst) addr .
* unicast lookup (tunnel local ip as dst + pkt's src addr)
where previously it needed 2:
* lookup by src to find unicast tunnel + compare dst to local addr
(failing for mcast)
* lookup by mcast to find the mcast tunnel
Change-Id: I7a3485d130a54194b8f7e2df0431258db36eceeb
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I43832cdadda820772ba9052890bba59b24e70c6c
Signed-off-by: Eyal Bari <ebari@cisco.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
the bihash key compare was doing the extra step of loading both keys into
vector regs and comparing those - instead of using the temporary values
created.
Change-Id: Ic557bfa56cd6aa60c71e7f28c880f85e1eb1e6ec
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I7bab9800c267dd6ea85288fd3d9ca88dff9f554b
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0d4630c88d6caacffcd073ebaa12766dfc893f70
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
* added the fib index into the key
* conform coding style for vxlan.h
* added "show vxlan tunnel raw" command to dump bihash
Change-Id: Icc96e41abb648e96de5b4605b035f68f9e20f8a9
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ic98945fa1ffcc73e0b239ff5cc11d45e7318613e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
ip4 vxlan cli/api (using flow infra) to create flows and enable them on
different hardware (currently tested with i40e)
to offload a vxlan tunnel onto hw:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1
to remove offload:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 del
TODO:ipv6 handling
Change-Id: I70e61f792ef8e3f007d03d7df70e97ea4725b101
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
+refactor decap loop to remove repetitions and goto's
slightly improves performance in scale (3k-4k tunnels) tests (7-9 clocks)
slightly deteriorates performance in single tunnel tests (3-4 clocks)
Change-Id: I1a64ed0279c00481b61a162296c5a30f58bf29c4
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I2e7e08e1de20ab57e3f899b080b90a3082219ae5
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch deprecates stack-based thread identification,
Also removes requirement that thread stacks are adjacent.
Finally, possibly annoying for some folks, it renames
all occurences of cpu_index and cpu_number with thread
index. Using word "cpu" is misleading here as thread can
be migrated ti different CPU, and also it is not related
to linux cpu index.
Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
fix wrong udp error codes in decap ip6 handling
Change-Id: Ibf791a995128d38b31725c1ee67ec9d1c9dffca2
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Add vxlan-bypass feature which can be enabled on the IP6 underlay
interface which receive VXLAN packets to accelerate VXLAN decap
processing. The CLI to enable/disable it is:
set interface ip6 vxlan-bypass <interface> [del]
The vxlan-bypass feature is already supported on the IP4 underlay
interface. The CLI to enable/disable it is:
set interface ip vxlan-bypass <interface> [del]
Move vxlan-bypass API/CLI support code from decap.c to vxlan.c.
Also fixed two issues in the VXLAN decap path in the vxlan-input node:
1. Add verification of VXLAN packet FIB index with the encap-vrf-id
of the VXLAN tunnel.
2. Fix checking of VXLANoIPv6 packet mcast DIP against that of the
IP6 mcast VXLAN tunnel.
Change-Id: I2bad4074a468c48fbb8bb5ac64f6437190756ed2
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I7b51f88292e057c6443b12224486f2d0c9f8ae23
Signed-off-by: Damjan Marion <damarion@cisco.com>
|