aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet/vxlan
AgeCommit message (Collapse)AuthorFilesLines
2021-02-05vxlan: add udp-port configuration supportArtem Glazychev5-60/+320
Type: improvement Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Change-Id: Ie30d51ab4df5599b52f7335f863b930cd69dbdc1
2021-02-03vxlan: fix interface namingRay Kinsella1-6/+8
Previous commit broke naming of vxlan interfaces. Type:fix Fixes:a4b0541f6 Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I5e304821be73547b4e47c35ad9632283f153830f
2021-01-20vxlan: fix SEGV reported in VPP-1962Ed Warnicke1-5/+29
Type: fix Replace vnet_register_interface with ethernet_register_interface Fixes https://jira.fd.io/browse/VPP-1962 Signed-off-by: Ed Warnicke <hagbard@gmail.com> Change-Id: I5f578fc416605429fe1e2b510ad49eb754451d40 Signed-off-by: Ed Warnicke <hagbard@gmail.com>
2021-01-14vxlan: Protect against tunnel config where source is not localNeale Ranns1-2/+11
Type: fix If a tunnel's source is not local then post encap VPP will attempt to receive (via ip4-local) that packet, things go wrong from there. The fix is when stacking the encap forwarding don't accept a receive DPO. This approach is taken, rather than rejecting bad tunnels, because the 'local-ness' of the tunnel's source can change and we can't reject tunnels that were once correctly configured but are no longer. the user will quickly discover their mistake as traffic won't pass. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I46198422e321606e8baba003112e978a526b4c2f
2020-12-14misc: move to new pool_foreach macrosDamjan Marion2-6/+6
Type: refactor Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-10-21misc: minimize dependencies on udp.hFlorin Coras3-1/+3
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id13f33843b230a1d169560742c4f7b2dc17d8718
2020-10-07misc: Purge unused pg includesNeale Ranns1-1/+0
Type: style Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I26a19e42076e031ec5399d5ca05cb49fd6fbe1cd
2020-09-04ip: enhance vtep4_check of tunnel by vector wayZhiyong Yang1-12/+32
This patch aims to improve decap performance by reducing expensive hash_get callings as less as possible using AVX512 on XEON. e.g. vxlan, vxlan_gpe, geneve, gtpu. For the existing code, if vtep4 of the current packet match the last vtep4_key_t well, expensive hash computation can be avoided and the code returns directly. This patch improves tunnel decap multiple flows case greatly by leveraging 512bit vector register on XEON accommodating 8 vtep4_keys. It enhances the possiblity of avoiding unnecessary hash computing once hash key of the current packet hits any one of 8 in the 512bit cache. The oldest element in vtep4_cache_t is updated in round-robin order. vlib_get_buffers is also leveraged in the meanwhile. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Signed-off-by: Junfeng Wang <drenfong.wang@intel.com> Change-Id: I313103202bd76f2dd638cd942554721b37ddad60
2020-08-31flow: code refactorChenmin Sun1-3/+7
This is the code refactor for vnet/flow infra and the dpdk_plugin flow implementation. The main works of the refactor are: 1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6 as the base the flow type 2. All the other flows are derived from the base flow types 3. Removed some flow types that are not currently supported by the hardware, and VPP won't leverage them either: IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU, IP6_GTPU_IP4, IP6_GTPU_IP6 4. Re-implemented the vnet/flow cli as well as the dpdk_plugin implementation 5. refine cli prompt 6. refine display info in command "show flow entry" Type: refactor Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
2020-06-15vxlan: remove judgement with always trueZhiyong Yang1-27/+15
if ((A | B) == false) it means both A and B are false, so for the following code if (PREDICT_FALSE (!good_udp1)) { if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0) { ... } } if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0) is always true if the code run it. Remove it. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I6bd1e9340c7a00089fc1c9ae49773add832d309e
2020-06-09vxlan: fix the inner packet checksum calculationMohsin Kazmi1-2/+51
Type: fix Change-Id: I1da4ace9f3e548af4b5b3373d695e4214c5df2ff Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-09misc: add code styling for vxlan encap and vxlan_packet filesMohsin Kazmi2-256/+282
Type: style Change-Id: Id363ccd0e51c61388fb45ef10685929f629cccbd Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-03-30vxlan: leverage vlib_get_buffers in vxlan_encap_inlineZhiyong Yang1-12/+14
vlib_get_buffers can save about 1.2 clocks per packet for vxlan encap graph node on Skylake. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I9cad3211883de117c1b84324e8dfad38879de2d2
2020-03-16vxlan: vxlan/vxlan.api API cleanupJakub Grajciar2-38/+47
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I7f6f37ec6eed780322e2488d6eb0f5681945ba09 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-03-03geneve gtpu vxlan vxlan-gpe: VRF-aware bypass nodeNick Zavaritsky3-93/+30
Bypass node MUST NOT intercept a packet if destination IP doesn’t match a local address. However IP address interpretation depends on the VRF, hence bypass node must take that into account. This patch also factors-out common VTEP management and checking code. Type: improvement Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com> Change-Id: I5665d94882bbf45d15f8da140c7ada528ec7fa94
2020-02-17misc: fix coverity warningsDave Barach1-2/+2
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b) check the indicated condition in production images. As in: p = hash_get(...); ALWAYS_ASSERT(p) /* was ASSERT(p) */ elt = pool_elt_at_index(pool, p[0]); This may not be the best way to handle a specific case, but failure to check return values at all followed by e.g. a pointer dereference isn't ok. Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
2020-01-10docs: Edit FEATURE.yaml files so they can be publishedJohn DeNisco1-2/+2
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: I7280e5c5ad10a66c0787a5282291a2ef000bff5f
2020-01-04vxlan: Add FEATURE.yamlJohn Lo2-1/+15
Type: docs Signed-off-by: John Lo <loj@cisco.com> Change-Id: I4372195121e05af671a3f48b1c2796cd0132b279
2019-12-20vxlan: reuse inner packet flow hash for tunnel outer header load balanceShawn Ji1-0/+7
Type: fix Several tunnels encapsulation use udp as outer header and udp src port is set by inner header flow hash, such as gtpu, geneve, vxlan, vxlan-gbd Since flow hash of inner header is already been calculated, keeping it to vnet_buffere[b]->ip.flow_hash should save load-balance node work to select ECMP uplinks. Change-Id: I0e4e2b27178f4fcc5785e221d6d1f3e8747d0d59 Signed-off-by: Shawn Ji <xiaji@tethrnet.com>
2019-12-17vxlan geneve gtpu: fix short helpPaul Vinciguerra1-1/+1
Type: fix Change-Id: Id53eb6ed15f270d747b9831a7b585cbafe515dd2 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-12-10api: multiple connections per processDave Barach1-1/+1
Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I2272521d6e69edcd385ef684af6dd4eea5eaa953
2019-12-05vxlan: fix vxlan hw offload issueChenmin Sun1-1/+3
Type: fix Since Vxlan hw offload jumps the ethernet-input node, so needs to adjust the data offset accordingly In original code, the current_data is 0 when arriving vxlan-flow-input node(due to no graph node before it, except the dpdk-input), so this code block cannot find the correct vxlan header: enum { payload_offset = sizeof (ip4_vxlan_header_t) }; vlib_buffer_advance (b0, payload_offset); see code in src/vnet/vxlan/decap.c, function vxlan4_flow_input_node This patch fixes this issue Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Iab4af7a7dc3b69a117a4c9ea1c59662669a6438c
2019-11-26fib: reduce save_rewrite_length to u8Klement Sekera1-1/+1
This is a preparation step for migrating NAT to use SVR (shallow virtual reassembly) to conserve space in vnet_buffer. Since max rewrite length is currently pre-data size (128), u8 is sufficient to hold that value. Type: refactor Change-Id: I5374bb396e178245b870cb0bbf1370d2a54230bc Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-08-05vxlan: fix VXLANoIP6 checksum offload setupJohn Lo1-4/+3
Fix UDP over IP6 checksum offload setup for VXLAN and VXLAN-GBP. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: If110467a68234d8eed941869a2a03735f339dc33
2019-07-19fib: FIB Entry trackingNeale Ranns1-7/+7
Instead of all clients directly RR sourcing the entry they are tracking, use a deidcated 'tracker' object. This tracker object is a entry delegate and a child of the entry. The clients are then children of the tracker. The benefit of this aproach is that each time a new client tracks the entry it doesn't RR source it. When an entry is sourced all its children are updated. Thus, new clients tracking an entry is O(n^2). With the tracker as indirection, the entry is sourced only once. Type: feature Change-Id: I5b80bdda6c02057152e5f721e580e786cd840a3b Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-18fib: fib api updatesNeale Ranns1-7/+5
Enhance the route add/del APIs to take a set of paths rather than just one. Most unicast routing protocols calcualte all the available paths in one run of the algorithm so updating all the paths at once is beneficial for the client. two knobs control the behaviour: is_multipath - if set the the set of paths passed will be added to those that already exist, otherwise the set will replace them. is_add - add or remove the set is_add=0, is_multipath=1 and an empty set, results in deleting the route. It is also considerably faster to add multiple paths at once, than one at a time: vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11 100000 routes in .572240 secs, 174751.80 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12 100000 routes in .528383 secs, 189256.54 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13 100000 routes in .757131 secs, 132077.52 routes/sec vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14 100000 routes in .878317 secs, 113854.12 routes/sec vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14 100000 routes in .900212 secs, 111084.93 routes/sec Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a Signed-off-by: Neale Ranns <neale.ranns@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-06-04features will register udp ports once configuredJakub Grajciar1-5/+11
plugins: - ipfixcollector vnet: - geneve - vxlan_gpe - vxlan Change-Id: I69a8b4017ee6990f2b4874fe3e94c4520bde7101 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-03-28Typos. A bunch of typos I've been collecting.Paul Vinciguerra1-1/+1
Change-Id: I53ab8d17914e6563110354e4052109ac02bf8f3b Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-03-26Simplify adjacency rewrite codeBenoît Ganne1-12/+2
Using memcpy instead of complex specific copy logic. This simplify the implementation and also improve perf slightly. Also move adjacency data from tail to head of buffer, which improves cache locality (header and data share the same cacheline) Finally, fix VxLAN which used to workaround vnet_rewrite logic. Change-Id: I770ddad9846f7ee505aa99ad417e6a61d5cbbefa Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-03-06vxlan*: migrate old MULTIARCH macros to VLIB_NODE_FNFilip Tehlar1-10/+4
Change-Id: Ide23bb3d82024118214902850821a8184fe65dfc Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-01-09VXLAN: Prevent duplicate bypass graph nodes.Jon Loeliger2-4/+37
Change-Id: I68cc509b594b09751ff5e0e09bbca187a4a88edd Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-11-14Remove c-11 memcpy checks from perf-critical codeDave Barach1-3/+3
Change-Id: Id4f37f5d4a03160572954a416efa1ef9b3d79ad1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-11-05vxlan: prefetch extra one cacheline holding external headerZhiyong Yang1-2/+2
For vxlan_encap, code will touch memory area before the field "data" in struct vlib_buffer_t, however so far it is not prefetched in cache yet for this graph node. After applying the patch, 2~3 cycles per pkt for vxlan4_encap can be saved on Haswell. It will bring a lot of benefits on DVN platform too. Change-Id: I26d8c57fb3d2415726be5367117d73eb715e35ad Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2018-10-23c11 safe string handling supportDave Barach3-5/+5
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab Signed-off-by: Dave Barach <dave@barachs.net>
2018-10-17vxlan:decap caching error (VPP-1462)Eyal Bari1-1/+1
Change-Id: I3ef0725684bcb8ea526abe0ce62562b35a0070f5 Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit 0d87894bf279a4678cfca6cc438583090b166f85)
2018-10-14vxlan:fix ip6 tunnel deletionEyal Bari1-1/+2
Change-Id: I70fb7394f85b26f7e632d74fc31ef83597efdd16 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-10-05vxlan:ip4 decap:remove access to tunnel objectEyal Bari3-183/+190
store local/remote addresses + vrf + vni in hash key store complete decap info in hash value (sw_if_index + next_index + error) this removes the need to access the tunnel object when matching both unicast and mcast. however for mcast handling it requires 3 hash lookups: * one failed unicast lookup (by src+dst addrs) * lookup by mcast(dst) addr . * unicast lookup (tunnel local ip as dst + pkt's src addr) where previously it needed 2: * lookup by src to find unicast tunnel + compare dst to local addr (failing for mcast) * lookup by mcast to find the mcast tunnel Change-Id: I7a3485d130a54194b8f7e2df0431258db36eceeb Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-09-24Trivial: Clean up some typos.Paul Vinciguerra4-12/+12
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2018-09-06vxlan: improve encap performanceZhiyong Yang1-2/+10
1. For vxlan, prefetching one cacheline is enough. 2. Reduce vlib_increment_combined_counter functtion calling if possible. Change-Id: If3a72ac40c8988caaf0d5915b695f86d799f15a9 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2018-08-28vxlan: decap use vlib_buffer_enqueue_to_nextEyal Bari2-255/+221
Change-Id: I43832cdadda820772ba9052890bba59b24e70c6c Signed-off-by: Eyal Bari <ebari@cisco.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-08-01vxlan:optimize cached entry compareEyal Bari1-9/+5
the bihash key compare was doing the extra step of loading both keys into vector regs and comparing those - instead of using the temporary values created. Change-Id: Ic557bfa56cd6aa60c71e7f28c880f85e1eb1e6ec Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-31vxlan:decap.c conform coding styleEyal Bari1-620/+690
Change-Id: I7bab9800c267dd6ea85288fd3d9ca88dff9f554b Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-31fix 'sh vxlan tunnels'Neale Ranns1-15/+4
this receipe: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; only works if there is more data following the registered command name. So it is not so good for show commands... Change-Id: I54249865a44526ade4b40e2d6207138a2d056e40 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-23fix vector index range checksEyal Bari1-1/+1
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-19Remove unused argument to vlib_feature_nextDamjan Marion1-3/+3
Change-Id: Ieb8b53977fc8484c19780941e232ee072b667de3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-09vxlan:use bihash_16_8 for ipv4 lookupEyal Bari3-66/+76
Change-Id: I0d4630c88d6caacffcd073ebaa12766dfc893f70 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-05vxlan:use bihash_24_8 for ipv6 lookupEyal Bari3-116/+167
* added the fib index into the key * conform coding style for vxlan.h * added "show vxlan tunnel raw" command to dump bihash Change-Id: Icc96e41abb648e96de5b4605b035f68f9e20f8a9 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-06-14vxlan:use VLIB_NODE_FN for multiarch selectionEyal Bari1-17/+1
Change-Id: Ic98945fa1ffcc73e0b239ff5cc11d45e7318613e Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-06-13vxlan:offload RX floweyal bari5-1/+579
ip4 vxlan cli/api (using flow infra) to create flows and enable them on different hardware (currently tested with i40e) to offload a vxlan tunnel onto hw: set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 to remove offload: set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 del TODO:ipv6 handling Change-Id: I70e61f792ef8e3f007d03d7df70e97ea4725b101 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-07vxlan:vxlan.c conform coding styleEyal Bari1-354/+374
Change-Id: I9937912cd760698e39044e8ae022a90b58c8db30 Signed-off-by: Eyal Bari <ebari@cisco.com>