Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I4b1f27b95d67d48b7a13750ff8754c344ed7afa7
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
An external (to VPP) process can register (over the VPP binary API) to
receive control plane packets over a UNIX domain socket. The packets are
prepended with a packet descriptor containing meta-data (if_index of
interface, etc).
Currently only UDP is supported.
The socket supports sending of packets/frames as well.
The sent packet is prepended with a descriptor, telling VPP to
route the packet (via ip4-lookup, ip6-lookup) or as an pre-formed
Ethernet frame that is sent directly to interface-output.
The intended use case for this is for an external DHCP client or
a RIP implementation.
New configuration option:
punt { socket <socket path> }
To register use the punt_socket API message.
TODO:
- Add support for pre-routing. I.e send L3 packet to given
TX interface, but do ARP/ND (ip[46]-rewrite)
- Add test scripts
- Support for abstract names (starting with \0)
- Add rate limiting (COP)
- Support for other protocols, e.g. IPv6 ND
Change-Id: I4a0afc8020deebb3d9d74686dde694ee5bcb8d0f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I0581a1bddad55d8d573c546ec84b0b2760abab3d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
1. Limit MAC entry update per l2-learn call to reduce update burst
when wall clock advance to the the next minute so all MAC time
stamps are behind current time needing update.
2. Optimize l2-learn node fast path code sequence.
3. Invalidate cache_key when update MAC entry.
4. Change L2 learn hit counter to L2 learn hit-update counter.
5. Increase L2FIB table memory size to 512MB to fit 4M entries
6. Set MAC learn limit at 4M entries
Change-Id: I3075ee8fb59645a56850126bac2e3e6d341cef4d
Signed-off-by: John Lo <loj@cisco.com>
|
|
Simply call pool_init_fixed(...) before using the pool. Note that
fixed, preallocated pools live in individually-mmap'ed address
segments, except for the free element bitmap. A large fixed pool can
exceed 4gb.
Fix tcp buffer allocator leak, remove broken assert
Change-Id: I4421082e12a77c41c6e20f7747f3150dcd01fc26
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
According to the spec, supporting interrupt mode from the driver is optional,
not a must. When interrupt mode is configured on the interface, we should
check to make sure that the driver didn't opt out for the kickfd support and
reject the configuration if it did.
Change-Id: I7d3dbaddde65458e1a6a802754a3768ae8685a0e
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I05d0c8310aa86480a3d283f45e115284c4b4ebd5
Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
|
|
Additionally, flush rx fifos for closed sessions.
Change-Id: If2cc563fbda0451e7572650e98b15f0a694a0ff9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In the data path, we grab qsz from vhost_user_vring_t to compute
qsz_mask and store it in a stack variable to use on many occasions.
We never use qsz for any meaningful purpose. It is more useful to
cache qsz_mask in vhost_user_vring_t to avoid the needless computation
in the data path.
Change-Id: Idf4d94a9754d5c75c899f1f4f59602275b9904a6
Signed-off-by: Steven <sluong@cisco.com>
|
|
- cleanup connects segment manager even if first
- fix segment manager allocation for listen sessions
- improve handling of process private segments (mheaps/main heap)
- added segment manager cli
Change-Id: Ic2ca97c3622ab2286d5fb5772aeb57680e64f769
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
See issue VPP-964
Change-Id: I2aed5abdc02e47e7bb5b0ce78cb6589a1ce7302f
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
create/delete/modify vhost_user APIs no longer support the operation mode
(polling/interrupt/adaptive). They are now done via the generic interface.
Change-Id: I9e9bd503f9b56c953ecd2b271b3e2007da20c72a
Signed-off-by: Steven <sluong@cisco.com>
|
|
- Remove frame handoff support machinery. We haven't used it in a long
time.
- Configuration support for the local endpoints bihash table
- Drop lookup failure packets in tcp46_syn_sent
Change-Id: Icd51e6785f74661c741e76fac23d21c4cc998d17
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- set session state as closed on session manager delete
- enable retransmit as opposed to persist timer after persist timer completes
- properly discard buffer chain bytes when new data overlaps ooo
segments
- don't use rxt bytes in snd space estimate used on tx path
Change-Id: Id9cab686e532e5fe70c775d5440260e8eb890a9f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
VPP is crashing without this fix if there is not any server
using VPP host stack and client attemts to connect.
Change-Id: I672977f78180bbc5ba9259116b2e165363463ccd
Signed-off-by: tjanciga <tomas.janciga@pantheon.tech>
|
|
The handler was calling the routines with sw_if_index instead of hw_if_index,
fix that by an extra call to vnet_get_sw_interface, and check that the interface
type is VNET_SW_INTERFACE_TYPE_HARDWARE before proceeding.
Change-Id: I4a6f65f44e250ecdb2b72d2693c9d7db5a52b966
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 778df28c2a1520f58c293700c578bdd73e61cecf)
|
|
Change-Id: I89a10204454aeea07412289b153ba50d6a15498c
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I81b3fc6266ad02239b6f1a216adc283efdcf0dce
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
1. Increase default MAC learn limit from 1M to 8M entries.
2. Check MAC learn limit in MAC learning update path.
3. Allow disable of want_l2_macs_events to set MAC learn limit
4. Other minor cleanups
Change-Id: I62438440937b5fa455e16f4a2e4d910277753395
Signed-off-by: John Lo <loj@cisco.com>
|
|
This is causing compiler error with gcc 7.
Change-Id: Ia65ee9d80ab263c79e82ad805e5cc5a12af91f85
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib1d2fc5a83d9d007a0468591a73881675f1bec9b
Signed-off-by: Kris Michielsen <kmichiel@cisco.com>
|
|
This include file is present only on x86 so it breaks non-x86 builds.
Change-Id: I6406b0b36f207b684535961545e95dbba707d267
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
1) introduce an interface-tx DPO. This is a simple wrapper around a sw_if_index. enhance DPO stacking functions to allow per-instance next-nodes and hence allow children to stack onto the interface per-instance tx node and not on 'interface-output'.
2) update PPPoE code to use ta midchain stack on a interface-tx DPO of the encap-interface. This remove the need for pppoe_encap node (which is replaced by the adj-midchain-tx) and interface-output node is no longer used (see above). Since PPPoE encap node is no longer needed, the PPPoE seesion does not need to be retrieved in the data-path, hence the cahce misses are removed.
Change-Id: Id8b40f53daa14889a9c51d802e14fed7fba4399a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ie1fba1a32020775444c7b1ed800e8559b54691ff
Signed-off-by: pragash <pxv3620@rit.edu>
|
|
Change-Id: I0e22c85ea570b934b9c78dc5e86d86d690bdae5e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ice6b3818ee24c7c248bf61e4d6c1ef2a85cb8fb1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ifa11f356d727b69cb121a2bf4cfb9d87883f545d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0124fa264f7f390fc7cd9722da59be03116831c5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- v6 support
- Non-default VRF ID collection
- Break up ip source address list into CLI + API-friendly functions
- Automate proxy arp / proxy nd configuration
- Automate local adjacency insertion
- Binary API support
Change-Id: Iede31184f65cc1ec8c414447d2d60a1334e3fe15
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I4f751b0181f25ec6c4abd3a9c7b0386d80743b3a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia6dd5e948b17b2f3866fe70838eabb09e35415e1
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
At this pointin the game, events do not have an associated context. they have the client_index and pid instead.
Change-Id: I5052cab78f710bba630a61d2390acbaa1b3813ab
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Additionally:
- remove opaques from stream_session_t
- ensure first segment manager is only used once per app.
Change-Id: I143d1fdb8effc88815ef969b78122ba3ac29e06e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9d172d70f645fea5005abced73ca2700e640263a
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I4cafc8291725feb499355092bd429433e649b5b2
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
When VPP has an interface whose address is also applied to a TAP
interface on the host, then VPP's TAP interface will be unnumbered
to the 'real' interface and do proxy ARP from the host.
the curious aspect of this setup is that ARP requests from the host
will come from the VPP's own address.
Change-Id: Ia238790e1034ba3cd3facdab29387b65a31525f2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I87d3cb5754843f38593e92f60a39af2e5241d1cf
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
The CLI commands were change from 'set/show interface placement' to
'set/show interface rx-placement', but the associated help text was not
updated. On the 'set interface rx-placement', some of the parameters
were renamed, which was confusing when looking at the documentation for
help.
While in the file interface_cli.c, cleaned up several other CLI
commands. There are still other commands in the file that need
addressing.
Change-Id: Ifdc357c73ad9f3362133c495217b5a6b3a411eab
Signed-off-by: Billy McFall <bmcfall@redhat.com>
|
|
- Add SYN_RCVD timeout
- Fix FIN_WAIT_1 to CLOSING transition
Change-Id: I42ca7fc087f6fdfae15bd7a6175dd3226ed341c7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Fixes make build-coverity
Change-Id: I5cf6992224f18b8e8770d365c42b3e759dc93f73
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: I58089d7a9867ede9d8a36b2aea62edef04cb5b81
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
commit only the addition of the .api definition and their invocation through VAT so CSIT can use it
Change-Id: Id510f14b1ce007fe5e92120507ea34100652fc64
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I224ef3ce1c4ac2ade5ba733a42c78b7ba5c0040e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
by not returning a multicast adjacency type when requested, but instead returning a nbr type, the mcast adj was never correctly deleted. hence when reused the adjacency object was not realocated from the pool and when it was freed a second time a crash occured.
Change-Id: Ia74ae3e889db0dfba8ec3c6a0cccfef215587ff6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I912fa53c02c720901c9fb253550790829107de39
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Fix tcp/udp sw checksum computation
- Fix allocation of multi buffer tcp segments for retransmits
- Send FIN only if/when tx fifo is empty
Change-Id: I2e43a14b87a72c9e547b4339b9a51811cf5732c4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0011c211908db6067f918fbaaa7d6863191d5bd3
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I06a10a4291e61aec3f1396d2514ed6fe3901897a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
happen for one table
Change-Id: I99d3e9227c33ee42b90e4842080960fcc6c03913
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
2nd commit is to fix style failures.
3rd commit is to remove unneccesary change based on review comment.
Change-Id: I4d54d25c27e037b9d0438f8af416cf113763dc6d
Signed-off-by: Chaoyu Jin <chjin@cisco.com>
|