aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2020-07-07tap: fix the tun sndbuf value for kernel 4.20 and laterMohsin Kazmi1-4/+16
Type: fix From kernel 4.20, xdp support has been added in tun_sendmsg. If sndbuf == INT_MAX, kernel executes xdp data path for tun driver which assumes packets are ethernet frames. This patch is avoiding the xdp data path in kernel by setting the sendbuf value < INT_MAX. Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ia4aa54b177b96d56a2d513d18d26ca01d5b88929
2020-07-06ip: set ip4 mask for ip_copy and ip_set when dealing with ip4 typejiangxiaoming1-2/+8
Type: fix Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com> Change-Id: I3ace7dfe3ddacb4f7fa7a974a2ffe2b3cf902ff9
2020-07-06fib: fix debug preprocessor directivesMatthew Smith4-4/+4
Type: fix Some debugging declarations were wrapped in an 'ifdef CLIB_DEBUG'. This seems to always evaluate true because clib.h defines CLIB_DEBUG to 0 if its not defined. The result is that if a route table is added and a route is added to it and then the table is deleted, VPP exits because the debug function fib_table_assert_empty() gets called whether VPP was started using a debug build or a release build. Change the ifdef to 'if CLIB_DEBUG > 0'. Change-Id: I357dc2c299e81b95244f2f7efaadb8e0de27627a Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-07-02tcp: fix coverity warningFlorin Coras1-2/+2
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I60828bc084b9adbb925c306d26060412c410c516
2020-07-02tcp: cli to dump half-open connectionsFlorin Coras1-0/+104
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idf7e483de0afc95a7579145fb16689e1853b10f9
2020-07-02tap: fix dump for TUN interfacesMohsin Kazmi2-1/+5
Type: fix Change-Id: I3bcc8ff1cf0a828ce3ba112694d38e3287d38d8d Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-07-02ip: fix the order in ip4 punt redirectMohsin Kazmi1-2/+2
Type: fix Fixes: a84cb715f5a4366dd2f32de18ad92bec566924da Change-Id: Id448d6ae9cfdd3122e8187121c509412835117c5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-30classify: fix debug CLIDave Barach1-1/+5
unformat_ip6_mask wasn't accounting for customized field names when deciding if it managed to parse at least one field. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I26cab4c6828b510e277079628af5115ac43af3ff
2020-06-30tcp: avoid rcv wnd more than RX fifo can enqueueRyujiro Shibuya1-7/+6
Type: fix Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com> Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie358b731f8ecb1fcaebd6e79f5ce5c10802c2814
2020-06-29gso: fix the l2 pathMohsin Kazmi1-8/+10
Type: fix Change-Id: I4f91175444dec9800d651aa5a5e0472359de63d1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-27udp: align udp_encap_t_ to 2 cachelinesVadym Martsynovskyy1-4/+4
Based on the comments in the struct, udp_encap_t_ is meant to span 2 cachelines. Due to the 64 bit alignment of dpo_id_t, the struct spanned 3 cachelines. This caused fetching ue_ip_proto to trigger an additional cache miss. This patch rearranges the ordering of the struct fields so that udp_encap_t_ only spans 2 cachelines as intended. before: (gdb) print (int)&((struct udp_encap_t_*)0)->cacheline1 $8 = 128 after: (gdb) print (int)&((struct udp_encap_t_*)0)->cacheline1 $1 = 64 Type: fix Signed-off-by: Vadym Martsynovskyy <vmartsyn@fb.com> Change-Id: I066c08654d4a8ef3e2d3954e957d4c5d382b209f
2020-06-27sr: fix for SID index across segment lists within a sr policyChinmaya Agarwal1-1/+1
Type: fix Signed-off-by: Chinmaya Agarwal <chinmaya.agarwal@hsc.com> Change-Id: I9aa5456bf94356e8702fbfd39b14db4c2e74d3e6
2020-06-27l2: performance enhancement in l2inputZhiyong Yang1-80/+69
Short Load/Stores combined with prefetching in the beginning of the loop place too much pressure on AGUs and memory accesses. The patch interleaves load/store operations with computational operations to alleviate the pain point. vlib_get_buffers is also leveraged. Redefine u8 dst_and_src[12] instead of dst[6] and src[6] in struct l2input_trace_t in order to merge two copys into one. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I7d3df7732c476069235e3019c68f0f53bca9637e
2020-06-27flow: add IPSec ESP/AH flowChenmin Sun2-1/+43
This patch adds the IPSec ESP/AH type flow support Have tested on E810 with Intel iAVF driver Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I6ab8e69f67c423cc4e33f3c363881a97cdb98c30
2020-06-27virtio: add tx traceMohsin Kazmi1-2/+60
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I0b1a1ce085ceb75fe139092e40878566682a7986
2020-06-27tap: remove the bridge configurations for TUN interfaceMohsin Kazmi1-9/+10
Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ifeae641ec0aa7de74e33e582234505bf6e28ca87
2020-06-26ip: fix the punt redirect for ip4Mohsin Kazmi1-6/+9
Type: fix Change-Id: I39341f201209931392f315ead5adfddd8b567caf Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-24virtio: fix the vlib buffer flagsMohsin Kazmi1-2/+1
Type: fix Change-Id: I92e8e30e4175229e24dd92471016e9095b5cc83e Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-23udp: jump over ip4 optionsFlorin Coras1-3/+3
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4f57a776302e11815fcea433ba8cf6724799ff65
2020-06-23ip6-nd: punt neighbor advertisementsAlexander Chernavin1-1/+1
With this change, punt received neighbor advertisements instead of drop in order to give other elements of the system an opportunity to handle them. Type: improvement Change-Id: Ie6cde9eebc83e42029967141cb32ebc459fd3680 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2020-06-17docs: add more FEATURE.yaml documentationDave Barach1-0/+15
This patch documents the DNS plugin, vlib packet tracing, vnet feature arcs, and the vppinfra library. Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Idb16ec0593d428ce78fe8404374a823a56b4b420
2020-06-17ip-neighbor: fix MLD hash key using stack pointerBenoît Ganne1-2/+2
Use pointed value (ipv6 address) as hash key instead of pointer value (pointer to ipv6 address on the stack). Type: fix Change-Id: I74a8b6d4bb552b5b344bcb50c8e830700c4ce739 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-16interface: add minimal vpp pkt trace for error-dropDave Barach2-8/+125
Provide a minimal trace [ip4/ip6 src/dst address] for dropped pkts when the user specifies "trace add error-drop XXXX", but does not trace pkts from the original input node. This is a wireshark dissector problem. Packets thrown at error-drop may be well-formed, or not. VPP must not crash, no matter what. The minimal trace capture and decode could be enhanced. Anyone interested in doing that must consider all of the corner-cases involved. This version should be at least somewhat useful. Note that "pcap trace drop ..." - and the packet generator - seem like the right tools to use when researching more complex issues. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I961ca133980ffa2a1e5707879a443b21442ed894
2020-06-16virtio: add vhost sw_if_index filter for sw_interface_vhost_user_dumpSteven Luong2-3/+6
The filter sw_if_index was in the API sw_interface_vhost_user_dump. But it was never implemented in the backend. This patch is to add the backend, vat, and custom dump support for the filter. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iaa41a7e11bfbcbb4c60092375e4b0dcf0950077b
2020-06-16gso: fix the udp checksum in testMohsin Kazmi2-13/+8
Type: fix Change-Id: I7005e4763e73f3679c40f94bdab26d439cd23188 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-15vxlan: remove judgement with always trueZhiyong Yang1-27/+15
if ((A | B) == false) it means both A and B are false, so for the following code if (PREDICT_FALSE (!good_udp1)) { if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0) { ... } } if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0) is always true if the code run it. Remove it. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I6bd1e9340c7a00089fc1c9ae49773add832d309e
2020-06-12virtio: interface type based improvementsMohsin Kazmi3-75/+142
Type: improvement Change-Id: I220ea6ab609e3c1628f5210be441d0d5e825a32c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-12ip: allocate ip4 mtrie pages in htlb memoryDave Barach3-2/+48
No change in default behavior. To use htlb pages for the ip4 mtrie, use the "ip" command-line option "mtrie-hugetlb". Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I5497e426a47200edff2c7e15563ed6a42af12e7f
2020-06-10ip: reassembly: LRU algorithm should eliminate the longest unused nodeszhengdelun2-2/+2
Type: fix Signed-off-by: zhengdelun <xszhengdelun@gmail.com> Change-Id: I3f6240b4c0798f85960acc55a193a0cbf0c67ea4
2020-06-09tap: enable gso/csum offload for tunMohsin Kazmi1-7/+0
Type: improvement Change-Id: I5b9d5ea192776f14a45bf909acc4bef7793521e8 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-09vxlan: fix the inner packet checksum calculationMohsin Kazmi2-4/+101
Type: fix Change-Id: I1da4ace9f3e548af4b5b3373d695e4214c5df2ff Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-09misc: add code styling for vxlan encap and vxlan_packet filesMohsin Kazmi2-256/+282
Type: style Change-Id: Id363ccd0e51c61388fb45ef10685929f629cccbd Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-08tcp: improve rtt estimation with rate samplingFlorin Coras1-18/+29
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I25043da84b2f2b3f37024ecfedac535df3004ea5
2020-06-08vxlan: Fixed checksum caclculation offsetVladimir Isaev6-72/+44
VXLAN uses csum_offload for IPv6 packets. But without gso node we have csum calculated only for inner packet. This patch adds support for outer header csum calculation. Checksum for inner packet should be calculated before interface-output node (for example in vxlan node). Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
2020-06-07fib: fix multiple dpo pool expand casesDave Barach6-7/+76
Add dpo_pool_barrier_sync/release, use them to clean up thread-unsafe pool expansion cases. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I09299124a25f8d541e3bb4b75375568990e9b911
2020-06-05fib: fix adj pool expand casesDave Barach1-1/+24
adj_alloc (...) is not thread safe when the adj pool or combined counter vectors expand. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I55710de6ecc083b7434e11798659cca9250c9131
2020-06-04fib: add barrier sync, pool/vector expand casesDave Barach1-1/+25
load_balance_alloc_i(...) is not thread safe when the load_balance_pool or combined counter vectors expand. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I7f295ed77350d1df0434d5ff461eedafe79131de
2020-06-01ip: fix IPv6 mask to prefix length conversionAndreas Schultz1-10/+5
make sure we don't pass a 0 (zero) to log2. Type: fix Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Change-Id: Ib3386ad4686835d3836f48294cee4058e897847a
2020-05-29bonding: Revert adjust link stateMatthew Smith1-20/+3
This reverts commit 9121c415a91904be50071ec55143d9c89b2f1b91. Reason for revert: causes deadlock with multiple worker threads Type: fix Change-Id: Icf3d6d343d99d887abacbaa03acbf04d4628514e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-05-29fib: Safe adj walkNeale Ranns1-8/+15
Type: fix the hash walk does not give the same guarantees as the bihash so walk in a safe manner. Change-Id: Idfe48c3a84ab3a341d887f7d196bc81ba34ae8b0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-05-29gso: fix flag for inner headerMohsin Kazmi1-2/+3
Type: fix Change-Id: Ic3fc488521636f7f7c9402a20db45fdb599adaae Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-29docs: Minor updates to feature.yaml filesJohn DeNisco2-6/+8
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: Iba106d33d34766b91e46980e7237fbdfc3710b8b
2020-05-29misc: ipfix-export unformat u16 collector_port fixElias Rudberg3-1/+20
Use %U and unformat_udp_port instead of %u for unformat() call for u16 collector_port number in set_ipfix_exporter_command_fn() to avoid corruption of other variables which can happen if unformat() with %u is used with a 16-bit variable. This avoids crash due to corrupted fib_index value. Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: Id54273fcc458a7f9c5aa4025aa91711f160c1c1a
2020-05-28tap: fix rx queue indexMohsin Kazmi1-1/+2
Type: fix Change-Id: I5601bdeb47d08118476ff7bd29435d2c1dba34b9 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-27ipsec: Add/Del IPSec SA is not MP safeNeale Ranns1-7/+0
Type: fix we can probably do better, but for now this is needed Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I07161f5ac07a70a0e6db6608ba31659d9bc2c9ed
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo8-31/+104
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2020-05-27ip: reassembly: use correct IP header offsetKlement Sekera1-2/+7
Type: fix Ticket: VPP-1883 Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Icf50a645e114fa3b7bd974f8c82f5ceebfcedcd7
2020-05-27bonding: adjust link state based on active slavesMatthew Smith1-3/+20
Type: improvement Bond link state is being maintained inconsistently. It is initially set to up. If the bond interface admin state is set to down, the link state is set to down. If the bond interface admin state is set to up, the link state is only set to up if there are active slave interfaces at that point. If slaves become active at some later time, it does not get updated. Its next chance to be updated is the next time the bond interface is set to admin up. To address this, do not set the link state to up after creating a bond. Adjust the link state as slave interfaces are attached or detached based on whether the bond is getting its first active slave or losing its last one. Unit test added to verify correct maintenance of link state. Change-Id: I31f17321f7f0e727e1ab1e01713423af6566dad9 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-05-26fib: Fix interpose source reactivateNeale Ranns1-0/+14
Type: fix when the interpose is on an adj-fib and the cover is removed the adj source will not install. this lead to no path list being found for the interpose source and a crash. pick a drop path list in this case. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ied217da043926c913657080f5ffb151201225d23
2020-05-26fib: Use basic hash for adjacency neighbour tableNeale Ranns1-82/+42
Type: improvement a bihash per-interface used too much memory. Change-Id: I447bb66c0907e1632fa5d886a3600e518663c39e Signed-off-by: Neale Ranns <nranns@cisco.com>