aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2018-05-18IP unnumbered dumpNeale Ranns2-1/+92
Change-Id: I4f245fd225bcc563fafee2696cd039477d661c57 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-18IP table bind allowed only if table existsNeale Ranns1-30/+6
Change-Id: If01400e3434b25b2da36ba28ceb8444b216d0e38 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-18ARP: Ensure STATIC and DYANMIC ARP flags are mutually exclusive.Jon Loeliger1-3/+9
Change-Id: I44278dea2ee1daa147b0928bfe26e861907a209f Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-05-18IP address dump - don't send subnets for unnumbered interfacesNeale Ranns1-4/+6
Change-Id: I8c64a0d2f757d96ffa7fd042c23b0d814217c215 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-05-18session: add session process nodeFlorin Coras5-0/+85
Add a session process node that handles main thread tx and retransmit in order to avoid having a polling input node. Change-Id: I3357e987c023a84b533b32793e37ab4204420f64 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-18tap: remove the local vlib_log_info definitionMohsin Kazmi1-9/+3
Change-Id: Idff55a19d27fed0d57e222f38d2e16c5367911cb Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-05-17Fix failure during enable/disable of featuresMatthew Smith2-5/+5
vnet_feature_enable_disable_with_index() checks the return status of vnet_config_{add,del}_feature(). If the config string heap index returned is the same index that was in use prior to the add/delete, it is concluded that a failure occurred and processing of the feature stops. Sometimes the config index that is returned can legitimately be the same index that was in used before the add/delete. The old list of features can have its heap entry deallocated before a new entry for the new list is allocated. The heap entry for the new list can be the entry that was deallocated while deleting the old one. Make vnet_config_{add,del}_feature() return ~0 on failure. Look for that return value as an indication that an error occurred in vnet_enable_disable_feature_by_index(). Change-Id: I88bb3ff88a76971c1b5e5ece74784ce8ba78373c Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-05-17Fixes in IPv6 RD control planeJuraj Sloboda2-30/+59
Add default route to the VRF table in which the interface is bound. Add missing pool_put. Change-Id: Id76c7dbfbf9bcf18357f372f3eee9b931df1995e Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-05-17flow:redirect to nodeEyal Bari1-0/+8
Change-Id: I4b6577b496c56f27f07dd0066fcfdfd0cebb6f1a Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-17tcp: handle link-local addressesFlorin Coras6-8/+75
Change-Id: I9ede6bc861350c7d9e78fa4d96cd584c2816d06f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-17Packet generator: preserve pcap file timestampsDave Barach6-0/+23
Set vnet_buffer2(b0)->pg_replay_timestamp, for use when desired. Fix a memory leak in pg_stream_free(...), which wasn't freeing the replay packet templates. Change-Id: I01822a9e91a52de4774d2b95cf0c2ee254a915e9 Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-16Drop IPsec packets when interface is downMatthew Smith1-10/+32
Packets arriving on an IPsec tunnel interface are decrypted and forwarded even if the interface is down. Check interface flags. If the interface is down, cause packet to be dropped and increment the counters for drops. Change-Id: I94456bda3bd8eade0f3f522ad7cc341251174e6e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-05-16echo client: used fixed pool for preallocated sessionsFlorin Coras2-14/+9
Change-Id: I9e2cf74ebe3e8750fa8d03930d2d72f4cae453c2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-15Update ipfix documentationDave Barach1-195/+180
Change-Id: Ie942efab86d24a953fe34754e3d50df54b560dc0 Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-15No overlapping sub-nets on any interface in the same table/VRF (VPP-943)Neale Ranns2-25/+82
DBGvpp# set int ip addr loop0 10.10.10.10/24 DBGvpp# set int ip addr loop0 10.10.10.11/24 set interface ip address: failed to add 10.10.10.11/24 which conflicts with 10.10.10.10/24 for interface loop0 Change-Id: Iba63ffafbd36b6146ce86adb78139da9d55b40ba Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-14proxy: fix active open connection cleanupFlorin Coras1-2/+2
Thanks to DucTM for spotting the issue. Change-Id: I7985560f224c99cf0fdeea0c8457a3ac6f10b03c Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-14Rework CP and DP communication in IPv6 RD (VPP-1256)Juraj Sloboda4-359/+163
Replace binary API communication between CP and DP with direct communication using function calls and callbacks. Change-Id: Ib54f09062217c028e5ee0e96ae2449cf7e9224e3 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-05-13Improve ipfix template packet rewrite constructionDave Barach4-10/+127
Instead of repeatedly cutting, pasting, and hacking to create a new callback, use vnet_flow_rewrite_generic_callback(). Add three arguments to the flow rewrite callback: (in) pointer to an array of report elements, (in) length of array, (out) pointer to the stream index Change existing code prototypes. Code owners encouraged to evaluate whether they can use the generic callback or not, at leisure. /* ipfix field definitions for a particular report */ typedef struct { u32 info_element; u32 size; } ipfix_report_element_t; Best generated like so: _(sourceIPv4Address, 4) \ _(destinationIPv4Address, 4) \ _(sourceTransportPort, 2) \ _(destinationTransportPort, 2) \ _(protocolIdentifier, 1) \ _(flowStartMicroseconds, 8) \ _(flowEndMicroseconds, 8) static ipfix_report_element_t simple_report_elements[] = { foreach_simple_report_ipfix_element }; ... /* Set up the ipfix report */ memset (&a, 0, sizeof (a)); a.is_add = 1 /* to enable the report */ ; a.domain_id = 1 /* pick a domain ID */ ; a.src_port = UDP_DST_PORT_ipfix /* src port for reports */ ; a.rewrite_callback = vnet_flow_rewrite_generic_callback; a.report_elements = simple_report_elements; a.n_report_elements = ARRAY_LEN (simple_report_elements); a.stream_indexp = &jim->stream_index; a.flow_data_callback = simple_flow_data_callback; /* Create the report */ rv = vnet_flow_report_add_del (frm, &a, &template_id); if (rv) return rv; ... Change-Id: If6131e6821d3a37a29269c0d58040cdf18ff05e4 Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-13session: improve app verbose format functionFlorin Coras1-5/+6
Change-Id: Idae4ecb60351f2e74bad2f2a33c073de8412fcb0 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-13session: alloc one frame per output node dispatchFlorin Coras5-54/+94
Change-Id: I1f7877af61f3726cfb7b93ce7893f6df23e866a6 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-11Periodic scan and probe of IP neighbors to maintain neighbor poolsJohn Lo9-14/+533
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them up to date. The neighbor of an entry is probed if its time-stamp is older than 1 minute. If the neighbor respond, its time-stamp will be updated. If there is no response from a neighbor, its entry will be deleted when the time-stamp of the entry become more than 4 minutes old. Static neighbor entries are not probed nor deleted. Implemented CLI and API to enable and disable priodic scan of IPv4, IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan parameters can also be changed from their defaults via the CLI/API. Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd Signed-off-by: John Lo <loj@cisco.com>
2018-05-11VPP-1275 Fix memory leaks in IPsec CLIKlement Sekera1-54/+83
Change-Id: I1f7c634328f25b33580a215af2daeb498cd3b181 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-11Add ipfix exporter coding guideDave Barach1-0/+375
Change-Id: Iaa28f96d613d6fb75bd29958d757de206448eb22 Signed-off-by: Dave Barach <dave@barachs.net>
2018-05-11Fix issue with xconnect not working on the main interfaceDamjan Marion1-9/+6
Due to union, l2 sub-interface bits were wrongly set causing sporadic misconfiguration of l2 mode on some interfaces. Change-Id: Id77ee281e3a0030878641a786c22ffe16ce1c759 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10vppinfra: use count_trailing_zeros in sparse_vec_indexDamjan Marion2-7/+7
It is much cheaper to use ctzll than to do shift,subtract and mask in likely case when we are looking for 1st set bit in the uword. Change-Id: I31954081571978878c7098bafad0c85a91755fa2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10vnet: device flow offload infraDamjan Marion11-0/+969
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-05-10session: fix proxy app multithreadingFlorin Coras1-15/+50
Change-Id: Ic5304749935f69018eb00183bb4670bb9f16273c Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-10Change the way IP header pointer is calculated in esp_decrypt nodesSzymon Sliwa2-3/+11
The pointer to IP header was derived from l3_hdr_offset, which would be ok, if l3_hdr_offset was valid. But it does not have to be, so it was a bad solution. Now the previous nodes mark whether it is a IPv6 or IPv4 packet tyle, and in esp_decrypt we count get ip header pointer by substracting the size of the ip header from the pointer to esp header (which lies in front of the ip header). Change-Id: I6d425b90931053711e8ce9126811b77ae6002a16 Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-05-10DHCP4 client process replies when renewing leaseMatthew Smith1-16/+24
When a DHCP client is in the bound state, it wakes up halfway through it's lease (by default) to try and renew the lease. The ip4-dhcp-client-detect is not enabled as a feature at this point, so replies sent from the DHCP server do not get applied to the lease. Eventually the lease expires, the address is removed from the interface, a new discovery is performed and the same address is added back to the interface. Before sending a request to renew in the bound state, enable the feature to process the reply. Change-Id: I95332ee0596f47df6f3c8bf8e3f0698dde9a1fc5 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-05-10tcp: fix jumbo retransmitsFlorin Coras1-42/+42
Change-Id: I1c8a14d4d51aa730f0edcf491e3c4725e2d8bd66 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-09ipsec: support UDP encap/decap for NAT traversalKlement Sekera9-33/+90
Change-Id: I65c12617ad49e4d5ef242e53988782f0cefa5684 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-05-09session: cleanup session tx functionFlorin Coras6-324/+450
- rework the function to declutter and avoid building more than one tx frame - add dual loop although benefits in my tests seem to be minimal - improve tcp/udp echo external apps. They have slightly better throughput than internal echo apps. - udp bugfixes Change-Id: Iea4a245b1b1bb407a7f403dedcce2664a49f774b Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-07BFD: Fix format_ip46_address() parameter ordering.Jon Loeliger1-1/+1
Change-Id: I2b50e3fc06b4e905395d4706083f12ebc76826ce Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-05-07vxlan:vxlan.c conform coding styleEyal Bari1-354/+374
Change-Id: I9937912cd760698e39044e8ae022a90b58c8db30 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-05-04ipsec: allow null/null for crypto/integ algorithms pairRadu Nicolau2-3/+3
Change-Id: Ic1e189c22e3d344d165e0eab05ccb667eef088a9 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-05-04Flow: Rename IPFIX exporter.Ole Troan9-9/+9
Change-Id: I9363cf54b73f7cfd8622af6f1cb250438ea0d3b6 Signed-off-by: Ole Troan <ot@cisco.com>
2018-05-04Harmonize vec/pool_get_aligned object sizes and alignment requestsDave Barach35-12/+146
Object sizes must evenly divide alignment requests, or vice versa. Otherwise, only the first object will be aligned as requested. Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at the end of structures, manually pad to an even divisor or multiple of the alignment request, or use plain vectors/pools. static assert for enforcement. Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-05-03MPLS prefetch fixesNeale Ranns2-15/+15
Change-Id: I565d79af410825c72f291ab40178883b1bc6f1df Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-05-03tcp: fix echo server rx retries counter vec allocFlorin Coras1-0/+2
If sessions are not preallocated, the rx retries counters are not correctly validated/initialized Change-Id: Iaf7456f3a0e2181fcea0c370613d694f8e98276d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-05-02Fix CentOS 7 build issue with vxlanMatthew Smith1-2/+4
Two vxlan union/struct initializations caused gcc on CentOS 7 to puke. Modified them to make the build work again. Change-Id: Iad667444b86cfde5ee4329993b520028d3b593ad Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-05-02vxlan:encap - use vnet rewriteeyal bari3-53/+50
moving the rewrite into the tunnel struct Change-Id: Iec74b48e13456d32957e826cffb5ea35a8ebd1a0 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-04-30tcp/session: debug improvements/fixesFlorin Coras6-30/+25
Change-Id: I906e58b4f9827a79a6ab673f8fa2e03036c69820 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-30FIB: elide cover walk for insert of host routeNeale Ranns3-3/+25
Change-Id: I2d39e56ff605e3a24927d6330d65d0406f588381 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27IPv6 NS/RS; do not vec_validate global structs in the DPNeale Ranns1-12/+16
Change-Id: I5cab31639e7819c9ab7e9c9159d931b25161d00b Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27IPv6 NS: use the mcast rewrite node to fill in the destination MACNeale Ranns2-263/+275
- move the IPv6 incomplete and glean node to ip6_neighbour.c (so it has access to ip6_neighbour_main_t) - use the RA info config on the interface to find the multicast adj to use Change-Id: I835e419072abe54fb09dafb0e7eb0a9e50eba1af Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27TAP memory leaks:Neale Ranns4-28/+22
1 - use bit-map to re-use ID values and thus VLIB nodes 2 - free vrings 3 - free hw_address on HW interface delete (a HW * struct is memset on pool_get) 4 - free temporary node names during TX node setup Change-Id: Id114c8bb9c844fd4ceb02fbbeb4b511ecfeb61ce Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-27A bit of buffer metadata reshuffling to accommodate flow_idDamjan Marion7-24/+24
Change-Id: I2794384557c6272fe217269b14a9db09eda19220 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-25Carry recorded QOS bits in the outer VXLAN IP headerIgor Mikhailov (imichail)1-0/+35
Currently for VXLAN IPv4. Change-Id: Id4b8bc0d9f6ab043810e4d1b9f28e01c27ce0660 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-04-25span: crash in span_mirror [VPP-1254]Steven1-2/+7
It is possible for span-input to get call with sw_if_index which is greater than sm->interfaces and crashes in span_mirror () in the following line span_interface_t *si0 = vec_elt_at_index (sm->interfaces, sw_if_index0); For example, span-input mirrors a main interface as source, it may actually get call for traffic coming in from the subinterface and crashes. The fix is simply to check if sw_if_index >= vec_len (sm->interfaces) and punt if it is. Change-Id: I8312eb321d638518e14ba2326fffd1a7919646ca Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit 516d63ff2c6671f3b0dc641511a50017a9804179)
2018-04-25GBPv6: NAT66 actions for GBPNeale Ranns1-1/+1
Change-Id: I379150a88f2d53d6281be41e8bad6fc4f4e88a71 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>