aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2018-03-25session: fix local session disconnectsFlorin Coras3-22/+58
Select the right segment manager for local sessions established via global table. Change-Id: I88ad4bf70d0cae160a0c744950098a954dfbc911 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-23Drop dhcp pkts w/ hardware address mismatchesDave Barach2-11/+40
Add a few dhcp client rx packet/state counters Temporarily disable the dhcp client unit test, since it trips over the newly-added hardware address check. Change-Id: I7f68607e6ed3d738cba357c3fe76664a99b71cd8 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-23IPSEC_AH: broken initialization (VPP-1208)Marco Varlese1-1/+1
The init-path for IPSEC_AH where the CTX gets initialized is broken since the for-loop never executes due to the wrong usage of tm->n_vlib_mains which being subtracted by 1. Change-Id: I4d967f52cd3ca061aa60d824d65f446e06162403 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-23tcp/session: sprinkle prefetchesFlorin Coras4-16/+37
Change-Id: Idef3c665580c13d72e99f43d16b8b13cc6ab746f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-23session: allow builtin apps to register namesFlorin Coras6-20/+73
Change-Id: I4b428e170436671b329657283cf7653befc85c9f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-22bond: performance enhancementSteven3-155/+220
We were only puting one packet per frame to the output node. Change to buffer multiple packets per frame. Performance is now on top of dpdk-based bonding. Put a spinlock in the tx thread in case the rug is pulled under us. Change-Id: Ifda5af086a984a7301972cd6c8e428217f676a95 Signed-off-by: Steven <sluong@cisco.com>
2018-03-22acl-plugin: implement ACL lookup contexts for "ACL as a service" use by ↵Andrew Yourtchenko1-1/+2
other plugins This code implements the functionality required for other plugins wishing to perform ACL lookups in the contexts of their choice, rather than only in the context of the interface in/out. The lookups are the stateless ACLs - there is no concept of "direction" within the context, hence no concept of "connection" either. The plugins need to include the The file acl_lookup_context.md has more info. Change-Id: I91ba97428cc92b24d1517e808dc2fd8e56ea2f8d Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-22Avoid atomic ops when polling queuesDave Barach1-4/+5
Change-Id: I31c6a0a1d11b5b12d8a5c32c29fea9618b1a53d4 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-21udp: make udp encap pool cacheline alignedDamjan Marion1-1/+1
This fixes issue with unaligned vector access on gcc-7. As udp_encap_t is declared as cacheline aligned, alloc also need to be. Change-Id: Ic30876911baf2c22c135097490075fa7bcf0ca18 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-21bond: Add bonding driver and LACP protocolSteven7-0/+2768
Add bonding driver to support creation of bond interface which composes of multiple slave interfaces. The slave interfaces could be physical interfaces, or just any virtual interfaces. For example, memif interfaces. The syntax to create a bond interface is create bond mode <lacp | xor | acitve-backup | broadcast | round-robin> To enslave an interface to the bond interface, enslave interface TenGigabitEthernet6/0/0 to BondEthernet0 Please see src/plugins/lacp/lacp_doc.md for more examples and additional options. LACP is a control plane protocol which manages and monitors the status of the slave interfaces. The protocol is part of 802.3ad standard. This patch implements LACPv1. LACPv2 is not supported. To enable LACP on the bond interface, specify "mode lacp" when the bond interface is created. The syntax to enslave a slave interface is the same as other bonding modes. Change-Id: I06581d3b87635972f9f0e1ec50b67560fc13e26c Signed-off-by: Steven <sluong@cisco.com>
2018-03-21VPP_1202: handle DHCP NAK packetsDave Barach2-1/+28
Change-Id: I469a734747099cef2d135d77e4db0244e24bf0bc Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-03-21UDP Encap countersNeale Ranns3-0/+65
Change-Id: Ib5639981dca0b11b2d62acf2c0963cc95c380f70 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-21Detailed Interface stats API takes sw_if_indexNeale Ranns1-1/+4
Change-Id: Id09d777c1706c1d613b14b719bcac596194465cd Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-21reassembly: feature/concurrencyKlement Sekera12-353/+795
This change makes ip reassembly an interface feature, while adding concurrency support. Due to this, punt is no longer needed to test reassembly. Change-Id: I467669514ec33283ce935be0f1dd08f07684f0c7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-20FIB Interpose SourceNeale Ranns31-4343/+5452
The interpose source allows the source/provider to insert/interpose a DPO in the forwarding chain of the FIB entry ahead of the forwarding provided by the next best source. For example if the API source (i.e the 'control plane') has provided an adjacency for forwarding, then an interpose source (e.g. a monitoring service) couold interpose a replicatte DPO to copy the traffic to another location AND forward using the API's adjacency. To use the interose feature an existing source (i.e FIB_SOURCE_PLUGIN_HI) cn specifiy as a flag FIB_ENTRY_FLAG_INTERPOSE and provide a DPO to interpose. One might also consider using interpose in conjunction with FIB_ENTRY_FLAG_COVER_INHERIT to ensure the interpose object affects all prefixes in the sub-tree. Change-Id: I8b2737b985f8f7c08123406d0491881def347b52 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19Use x(void) not x() in new interface stats codeNeale Ranns2-5/+5
Change-Id: Iaceaba4dc22341c631c858516b960ce97c4aa564 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19session: fix coverity warningsFlorin Coras2-1/+12
Change-Id: I022dc40476ea9c30957b12bf1bd0629c6eb41cda Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-19Coverity found bugs in recent MPLS changesNeale Ranns3-17/+8
Change-Id: I590945fdc1af53208c990a52bbecdc992fd27532 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-19QoS code coverity found errorsNeale Ranns1-2/+2
Change-Id: I6b125b79bdc560bfb81f307367c844b6a5af6368 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-19FIB code coverity found defectNeale Ranns1-1/+1
Change-Id: I7cdc29dd6481242aaace75138cc34e2f5ea76b81 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-19Interface Unicast, Multicast and Broadcast stats on the APINeale Ranns4-6/+162
Change-Id: I7c75da358aff1bd0216a602a49f2909cef5d920d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-19IGMP pluginJakub Grajciar2-2/+36
- host mode: igmp_listen - API to signal that the host has joined an (S,G) - route mode: igmp_enable - API to enable the reception of host IGMP messages igmp_event - API to report the host join/leave from an (S,G) Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-03-19IPIP: Fix coverity error.Ole Troan1-0/+3
Change-Id: Ia2b3350bf8e2c72eee3f33936ba16dd817c75c72 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-19FIX: Fixed ip6_fib_dump api function response.Dmitry Vakhrushev3-1/+9
Change-Id: I26c5d61bc2f6188bcd4ecac4b5e9385821b0398b Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
2018-03-18Remove unnumbered configuration on interface deleteNeale Ranns6-80/+68
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16QoS recording and markingNeale Ranns19-11/+1630
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16Fix a long-latent bi=0 bug in vlib_buffer_add_dataDave Barach1-2/+2
Change vlib_buffer_add_data() so it interprets ~0 to mean please allocate a new buffer, instead of 0. Fixed a couple of calls to pass ~0 instead of 0. Zero has always been a valid buffer index, we never happened to actually use it until recent buffer allocator changes. The presenting symptom: ASSERT failure when running "make TEST=test_mpls test-debug" Change-Id: Ic909913c1d464b3434d6d47e0c58f978806854d5 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-16IPv6 ND Router discovery control plane (VPP-1095)Juraj Sloboda5-1/+1029
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16stats: allow configuring poller delayKlement Sekera2-16/+28
This introduces a startup config option for configuring stats poller delay. Use `stats { interval <seconds> }` to configure the delay at startup. The default value remains unchanged - 10 seconds. Change-Id: If12cb1f7f6f1f8ecfa461561bc77847cdf260388 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-16IPSec: fix IPv6 policy deletingMatus Fabian1-1/+1
Change-Id: I9f487d6033edde09557709f94f97fc8a70246b09 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda4-5/+613
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16session: allow local host bindsFlorin Coras1-4/+4
Change-Id: I906bbc5bc75279f210093fb9276db9e35ee44c1f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-15Update session local address is_ip4 on bind when not globalKeith Burns (alagalah)1-0/+1
Change-Id: I73ddca5a86e83c9f547778828bb49d2bd4675eaf Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-03-15tls: add openssl engineFlorin Coras8-162/+154
Change-Id: I6c215858d2c9c620787632b570950b15274c0df2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-15Add a helper function to fetch vlib node index for already stacked dposVijayabhaskar Katamreddy2-0/+40
Change-Id: Ie07c6f3723312ce88046570dcbe591b72724657b Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-03-14vlib: internal buffer manager reworkDamjan Marion1-3/+2
- buffer_main is no longer part of vlib_main_t - pool of free lists is still part of vlib_main_t - mheap is not used anymore for buffer allocation - simple bitmap bassed buffer alloc scheme is introduced Change-Id: I3e1e6d00e2c8122293ed0a741245eb841315a1ff Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan10-0/+2244
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-14srv6-plugins: fixing documentationFrancois Clad1-0/+7
Change-Id: I72439df585e56b3cbb7051f056fc35cddf0c864b Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-14srv6: minor CLI modificationsFrancois Clad4-15/+14
'sr steer [...] via sr policy [...]' -> 'sr steer [...] via [...]' 'show sr steering policies' -> 'show sr steering-policies' 'clear sr localsid counters' -> 'clear sr localsid-counters' Change-Id: I0efbf38753a4bd0b7fba8cd08250e136e8e55199 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-14Improve l2_macs_events API to provide MAC move informationJohn Lo4-8/+22
Change mac_entry layout in l2_macs_event API message so the MAC entry can be either add, delete or move where the sw_if_index of an existing MAC entry changed. Also added a 8-bit flags field in mac_entry for any future expansion. Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f Signed-off-by: John Lo <loj@cisco.com>
2018-03-14At AF_PACKET socket create, do intf bind before rx ring cfg to avoid ↵Chaoyu Jin1-12/+12
receiving pkts from other interfaces Change-Id: Ie40ee9129edaac717e716b469f4d10f3c29a4932 Signed-off-by: Chaoyu Jin <chjin@cisco.com>
2018-03-13SCTP: data retransmission & snd_space fixMarco Varlese3-4/+88
This patch addresses two things: 1) The data retransmission which needs to be taken care of when the SCTP_TIMER_T3_RXTX; 2) The correct calculation of the amount of data transmittable considered: the local window, the peer window and any data inflight. Change-Id: I2d03a6cb43e4e7770c4910f8547c66e1026aeace Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-13Common form of fib-path reproting in dumpsNeale Ranns8-126/+304
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-13FIB: DVR paths are not considered L3 attachedNeale Ranns1-0/+10
Change-Id: Ie473dca3264b480b007d2eb500aaa557b889c7c1 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-13SCTP: cumulative SACK fixMarco Varlese4-15/+44
A bug was found affecting the cumulative sending of SACK messages. Because the next0 was never assigned to the next_output the SACK message was never leaving the peer. Further, two new flags have been added to distinguish when a peer is AWAITING a SACK message (e.g. DATA is inflight and waiting to be acknowledged). Change-Id: Ibb5a98f7e5fed15cdc76710b74195cac031d59ed Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-12SPAN: Add 'is_l2" flag to DETAILS response messages.Jon Loeliger2-0/+3
Change-Id: I375bb0e663bc082d98a29fb101c653557ddc8f55 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-03-12Remove md5.[ch] from vppinfraDave Barach1-13/+2
Removed the sole use of it from ip6_neighbor.c Change-Id: Ie53cb3b6a3a41ec0917ec2042e5006d0cfaefc01 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-11vnet: l2-classify: prefetch (n+2, n+3) rather than (n+1, n+2) inside dual ↵Andrew Yourtchenko2-10/+10
loop code The dual loop within the L2 classifier processes the (n, n+1) packets, the prefetching was trying to prefetch (n+1, n+2) - thus half of the prefetches were not used - because the next iteration needs (n+2, n+3). Change-Id: I827d20845dbdd0dcdcf463ee25661a7921428992 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-10Move the vnet cdp protocol implementation to a pluginDave Barach6-1569/+0
Add a binary API and debug cli to enable/disable cdp. cdp is disabled by default. Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts1-6/+16
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>