aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2020-05-14nat: ED: store both thread&session idx in hashKlement Sekera1-1/+1
By storing thread and session index in hash table we are able to skip multiple hash lookups in multi-worker scenario, which were used for handoff before. Also, by storing sesion index in vnet_buffer2, we can avoid repeating the lookup after handoff. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I406fb12f4e2dd8f4a5ca5d83d59dbc37e1af9abf
2020-05-14ip: fix interface ip address del sw_if_index checkyedg4-6/+27
Type: fix Signed-off-by: Ye donggang <yedg@wangsu.com> Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
2020-05-13sr: fix srv6/srv6-ad/srv6-as promisc mode switchJohn Lo1-16/+10
Calling ethernet_set_flags() to switch interface to/from promiscuous mode must use use hw_if_index instead of sw_if_index. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
2020-05-13gso: remove ordering dependency on esp-encrypt-tunNeale Ranns1-2/+2
Type: fix ... it's not a feature anymore Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ifbcaf7d832aa76336feb0556d0dc7d2002f19c35
2020-05-13interface: fix the checksum offload in quad loopMohsin Kazmi1-20/+25
Type: fix In quad loop, checksum will be calculated for all four packets, if one packet needs checksum computation, without respecting their respective flags. This patch fixes it. Change-Id: I479b420ba0dcbd178ea4180bf05a0e55a6b13843 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-13feature: Config end nodes are user specificNeale Ranns5-24/+41
Type: fix it is possible for a user to change the end node of a feature arc, but this change should only apply to that 'instnace' of the arc, not all arcs. for example, if a tunnel has its ipx-output end node changed to adj-midchain-tx, this shouldn't affect all ipx-output arcs. obviously... Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I41daea7ba6907963e42140307d065c8bcfdcb585
2020-05-13bonding: fix the GSO flagsMohsin Kazmi1-2/+8
Type: fix Only add GSO and Checksum offload flags when gso is enabled. Change-Id: I58945a4ffbb9a0e6a8640fc01424c63feef16306 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-13ipsec: Support 4o6 and 6o4 for SPD tunnel mode SAsNeale Ranns2-38/+65
Type: feature the es4-encrypt and esp6-encrypt nodes need to be siblings so they both have the same edges for the DPO on which the tunnel mode SA stacks. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I2126589135a1df6c95ee14503dfde9ff406df60a
2020-05-13nat: handoff next node feature fixFilip Varga1-1/+1
Type: fix Change-Id: I14e323e7bb1db7a3d40668212535c07504374e59 Signed-off-by: Filip Varga <fivarga@cisco.com>
2020-05-12tcp: avoid rcv wnd less than mssFlorin Coras1-6/+4
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I84ec1c91a3a7b2195aad58923fa6f17f551444cb
2020-05-10ip-neighbor: fix show ip neighbor issueMichael Yu1-5/+4
Fix the issue that vppctl show ip4{6} neighbor [interface] command can't show entries correctly, example: both ip4 and ip6 entries can be shown with command: vppctl show ip4 neighbor. Type: fix Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com> Change-Id: I229368b71cd285adce994c8290cc9d7e4c4f5aa6 Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
2020-05-10ethernet: fix dmac stride errorZhiyong Yang1-1/+1
Type: fix Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I617fb365def22a28d48f75013dea38f8e1703a44
2020-05-08ethernet: fix coverity warningDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I20daa023eed50f8b42e8dc2d17e47a54aa16ae31
2020-05-07session: catch segment manager alloc failureFlorin Coras1-3/+4
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4ac923fda84feee8d2ad76d0c3e3a252f53008ed
2020-05-06docs: clean up make docs jobPaul Vinciguerra10-11/+15
Type: docs Change-Id: I9b5e5137eb4c1e89f6e8d7a278cd11a0fd496471 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-05-06crypto: fix coverity issuesFan Zhang1-20/+1
Fix coverity issues in crypto framework and cryptodev engine. Type: fix Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: Ib261da0163c8182c803600db22c5a6dad5a19999
2020-05-06misc: fix coverity warningsDave Barach1-1/+1
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I51660e4b02f449bd2db12a8cfd395c6c343d2dee
2020-05-05ipsec: User can choose the UDP source portNeale Ranns9-24/+110
Type: feature thus allowing NAT traversal, Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ie8650ceeb5074f98c68d2d90f6adc2f18afeba08 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-05-05session: improve .api comments slightlyVratko Polak1-3/+3
Type: style Change-Id: Iccd2c205059abcdf121093ff03da603fe3dda1f7 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-05-05api: ip: add IP_ROUTE_LOOKUP APIChristian Hopps2-0/+83
Add an IP_ROUTE_LOOKUP function that does either an exact match or longest prefix match in a given fib table for a given prefix returning the match if present. Add API test. Type: improvement Signed-off-by: Christian Hopps <chopps@labn.net> Change-ID: I67ec5a61079f4acf1349a9c646185f91f5f11806
2020-05-05gso: add support for IP-IPMohsin Kazmi7-138/+266
Type: feature Change-Id: I37752af8496e0042a1da91124f3d94216b39ff11 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-04ethernet: add sanity checks to p2p_ethernet_add/delDave Barach2-0/+41
Binary API message handlers need to check sw_if_index values. Found in binary api fuzz testing. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I51e717e9260e58a4c36d4d95981fd001be594fed Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-05-04session: add option to preallocate fifo headersFlorin Coras5-34/+56
Type: feature Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie47546ef36590b90ed481b14cf812afbecf7981c
2020-05-04fib: midchain adjacency optimisationsNeale Ranns25-605/+822
Type: improvement - inline some common encap fixup functions into the midchain rewrite node so we don't incur the cost of the virtual function call - change the copy 'guess' from ethernet_header (which will never happen) to an ip4 header - add adj-midchain-tx to multiarch sources - don't run adj-midchain-tx as a feature, instead put this node as the adj's next and at the end of the feature arc. - cache the feature arc config index (to save the cache miss going to fetch it) - don't check if features are enabled when taking the arc (since we know they are) the last two changes will also benefit normal adjacencies taking the arc (i.e. for NAT, ACLs, etc) for IPSec: - don't run esp_encrypt as a feature, instead when required insert this node into the adj's next and into the end of the feature arc. this implies that encrypt is always 'the last feature' run, which is symmetric with decrypt always being the first. - esp_encrpyt for tunnels has adj-midchain-tx as next node Change-Id: Ida0af56a704302cf2d7797ded5f118a781e8acb7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-05-04tcp: fix max tx sack blocks upper boundFlorin Coras1-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I70c63db91c3512fb724bba4762e3ca1e369ca421
2020-05-04misc: binary api fuzz test fixesDave Barach7-9/+10
Add a hook to src/vlibapi/api_shared.c to fuzz (screw up) binary API messages, e.g. by xoring random data into them before processing. We specifically exempt client connection messages, and inband debug CLI messages. We step over msg_id, client index, client context, and sw_if_index. Otherwise, "make test" vectors fail too rapidly to learn anything. The goal is to reduce the number of crashes caused to zero. We're fairly close with this patch. Add vl_msg_api_max_length(void *mp), which returns the maximum plausible length for a binary API message. Use it to hardern vl_api_from_api_to_new_vec(...) which takes an additional argument - message pointer - so it can verify that astr->length is sane. If it's not sane, return a u8 *vector of the form "insane astr->length nnnn\0". Verify array lengths in vl_api_dhcp6_send_client_message_t_handler(...) and vl_api_dhcp6_pd_send_client_message_t_handler(...). Add a fairly effective binary API fuzz hook to the unittest plugin, and modify the "make test" framework.py to pass "api-fuzz { on|off }" to enable API fuzzing: "make API_FUZZ=on TEST=xxx test-debug" or similar Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I0157267652a163c01553d5267620f719cc6c3bde
2020-05-04tap: refactor existing flagsMohsin Kazmi4-17/+30
Type: refactor This patch refactor the existing flags and also add a new flag for packet coalescing. Change-Id: Ic826e4c81313f26d87c475cdf666b06cbed60a3a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-02ip-neighbor: honor walk callback return valueRuslan Babayev1-2/+4
Type: fix Change-Id: I5e1f7c37d612f4666edf2262b457ae0e13f20791 Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
2020-05-01tap: implement sw_interface_tap_v2_dump filtering by sw_if_indexPaul Vinciguerra3-13/+12
Type: feature Change-Id: I6f607f383dc77a71e8712124f7613b38b4ac065a Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-30l2: fix coverity warnings in l2_fwd.cDave Barach1-9/+9
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ibf468970b56fc6bf8d5fb6ba491dd3e727464fc0
2020-04-30tcp: fix v6 ll lookup fibFlorin Coras1-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie4b2bca3b6b0ca6097152aab232991ca7935e442
2020-04-30session: cleanup listener segment manager on wrk freeFlorin Coras3-10/+18
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I1585af9e4f4273f055aed824b133ddc8eddd1df7
2020-04-30ip-neighbor: Add flush APINeale Ranns4-0/+71
Type: feature Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I96509c274895b917c3e220204d7959d9270de30d
2020-04-30flow: add l2tpv3oip flowChenmin Sun2-2/+24
This patch adds the l2tpv3oip type flow support Have tested on E810 with Intel iAVF driver Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: Icb5114b5f70dd7a63f681e7c6ac802fade8b8cf1
2020-04-30crypto: introduce async crypto infraFan Zhang14-740/+2890
Type: feature Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Signed-off-by: Dariusz Kazimierski <dariuszx.kazimierski@intel.com> Signed-off-by: Piotr Kleski <piotrx.kleski@intel.com> Change-Id: I4c3fcccf55c36842b7b48aed260fef2802b5c54b
2020-04-30tap: allow deletion of tun interfaceMatthew Smith1-2/+5
Type: improvement tap_delete_if() returns early if the interface type is not VIRTIO_IF_TYPE_TAP. Allow VIRTIO_IF_TYPE_TUN also and take appropriate action for those interfaces. Change-Id: I196b6d6f3f5e1543a14d6be76fd879d44c9794fd Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-04-29ip: use thread local vm instead of thread main for vlib_time_now callsTom Seidenberg2-2/+2
Type: fix Change-Id: I8d68e7c7392dcb748a2a84e72c7b1ca0c6c0eb07 Signed-off-by: Tom Seidenberg <tseidenb@cisco.com>
2020-04-29devices: vhost: simplify string copies for GCC-10Benoît Ganne1-10/+5
GCC-10 increases string truncations warnings. Refactor string copies confusing it. Type: refactor Change-Id: I9720a0539059de00ab212ff2fc73055f04f5af1d Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-04-29tap: fix missing "num-rx-queues" from cli helpMohsin Kazmi1-6/+6
Type: fix Change-Id: Ib09c7cebb6978b3adc09ac36cb32f7947b143e51 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-04-29interface: fix interface_types.api enumsPaul Vinciguerra1-9/+8
Unspecified c enums start at 0. Unspecified api enums start at 1. Type: fix Change-Id: I431c11302c0ad897a968134ce90496af3db7bb86 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-28vlib: add ASSERT to vlib_time_now(...)Dave Barach2-2/+3
Calling vlib_time_now (&vlib_global_main) from a worker thread is a bad mistake. ASSERT (vm->thread_index == __os_thread_index) will catch it. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I55af6de84e06143f8f43adc62103b77267a7a441
2020-04-28flow: add RSS supportChenmin Sun2-2/+110
This patch enables the RSS configuration through vnet/flow interface With this RSS feature, users can config the RSS functions for specific flows Currently, it supports: default, toeplitz and symmetric_toeplitz rss function, and ipv4-tcp/ipv4-udp/ipv6-tcp/ipv6-ucp flow types Users can use the following options to combine with above flow types for more specific hash input set selection: l3-src-only, l3-dst-only, l4-src-only, l4-dst-only Command line: test flow add dst-ip any proto udp rss function default rss types ipv4-tcp use l3-dst-only test flow add dst-ip any proto udp rss function toeplitz rss types ipv4-udp use l4-src-only test flow add dst-ip any proto udp rss function symmetric_toeplitz rss types ipv6-udp use l3-src-only and l3-dst-only Type: feature Signed-off-by: Chenmin Sun <chenmin.sun@intel.com> Change-Id: I213efc76dc8af37f2f63605884f353e05b0f5d2a
2020-04-28tap: use one tap fd per rx queueAloys Augustin3-35/+64
This matches vhost queues to linux netdev queues and avoids random packet shuffling across vhost queues on rx. Change-Id: I9901689d361e440fb0b91c9fbaf8124ce525b316 Type: fix Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2020-04-28ipsec: fix buffer allocFilip Tehlar1-1/+7
Type: fix Change-Id: I0f12c19b79df19b692f18ac13d6c32341853b764 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-04-28tests: implement ipaddress convenience methodsPaul Vinciguerra1-8/+8
Add vpp specific properties to ip addresses for use in the api. .vapi_af -- returns [ADDRESS_IP4, ADDRESS_IP6] .vapi_af_name -- returns the string ['ip4', 'ip6'] Update tests to demonstrate usage. Type: feature Change-Id: I43447a1522769d99f89debdc714c51700068d771 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-28lisp: API cleanupJakub Grajciar12-924/+651
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ib7f73a0b6de188982a09040f7739dc46be3cb1de Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-04-28tests: move defaults from defaultmapping to .api filesPaul Vinciguerra8-24/+24
facilitates use of papi beyond the tests. Type: improvement Change-Id: I3d502d9130b81a7fb65ee69bb06fe55802b28a27 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2020-04-28tcp: remove sack reneging verbose loggingFlorin Coras1-2/+0
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4dbbf8456d0ed2350459fcdc0664bbae024072fc
2020-04-27virtio: support virtio 1.1 packed ring in vhostSteven Luong8-156/+1604
virtio 1.1 defines a number of new features. Packed ring is among the most notable and important one. It combines used, available, and descripptor rings into one. This patch provides experimental support for packed ring. To avoid regression, when packed ring is configured for the interface, it is branched to a separate RX and TX driver. Non packed ring should continue to perform as it was before. Packed ring is tested using qemu4.2 and ubuntu focal fossa (kernel 5.4.0-12) on the guess VM which supports packed ring. To configure VPP with packed ring, just add the optional keyword "packed" when creating the vhost interface. To bring up the guest VM with packed ring, add "packed=on" in the qemu launch command. To facilitate troubleshooting, also added "verbose" option in show vhost desc CLI to include displaying the indirect descriptors. Known qemu reconnect issue - If VPP is restarted, guest VMs also need to be restarted. The problem is kernel virtio-net-pci keeps track of the previous available and used indices. For virtio 1.0, these indices are in shared memory and qemu can easily copy them to pass to the backend for reconnect. For virio 1.1, these indices are no longer in shared memory. Qemu needs a new mechanism to retrieve them and it is not currently implemented. So when the protocol reconnects, qemu does not have the correct available and used indices to pass to the backend. As a result, after the reconnect, virtio-net-pci is reading the TX ring from the wrong position in the ring, not the same position which the backend is writing. Similar problem exists also in the RX. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I5afc50b0bafab5a1de7a6dd10f399db3fafd144c
2020-04-27l2: merge two clib_memcpy_fast into oneZhiyong Yang1-11/+16
Merge two memcpy into one by swapping src and dst address in l2fwd_trace_t. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I71c5ecad0b453a434b1cb292ef03d88a760255c8