Age | Commit message (Collapse) | Author | Files | Lines |
|
gso option is available for the debug CLI version of bond create.
This patch is to create a new API to have the corresponding option in
the binary API. The old binary API bond_create is marked deprecated.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Id9501b8e6d267ae09e2b411957f181343da459c0
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7228a01d38e61cc00358419b2512ca0da4f76ff5
|
|
Type: improvement
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I841f4407ed8c1a448e5102059fc79ae1f7d461de
|
|
Type: fix
Change-Id: I2b6b7b6f28cbf7accf883743e390b0031dd13bbb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ia1276d00dded36ee28b4b2e93b4cc7c1df6b1eef
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I95d7fc1cc8db5199570c66535f45e867a7cae676
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3e00deb94943c545d1649865b2efdf7d51b90f4d
|
|
Type: fix
Change-Id: Ia28161b583ea26ab820a494332a79b64add7004d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I8d55c2bfdd3c4607044370ebabf40cbac78b4996
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I12b08333f3f69aaa882e8801f4f69bca2d7bd558
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I3697cf7fab7abb7c3d2f61ef326c9116bc1eed66
|
|
In one's complement, there are two representations of zero: the all
zero and the all one bit values, often referred to as +0 and -0. See
RFC 1624 section 3 for more details.
This used to be taken care of in ip4_header_checksum(), but it is no
longer the case. The check ip->checksum == ip4_header_checksum (ip) is
no longer correct in the -0 case.
Always use ip4_header_checksum_is_valid() instead (which behaves
correctly since 9a79a1ab931c3b5a7ae07d6f0fcfef7c4368a2c4).
Type: fix
Fixes: e5f0050c7a5d411f96af6401797529d58825e2af
Change-Id: Iacc6b60645a834287b085aecb9e3fdb4554cf0cf
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: Ie063ee0a0c59a9ad632200ce2b23703bc0d936e6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Adjacencies are only defined for IPv4 and IPv6.
Type: fix
Fixes: 20aec3db441074ee5a861a40d6e02fad2f3dcb37
Change-Id: I19b2b7f6958da49f41c6eabc9f248840769acbbb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
It is cheaper to include checksum field in calculation and simply
compare result with zero.
Type: improvement
Change-Id: I6f77632c0a4d2f2c632d044d3a5d2fcf2b5bac62
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Make it shorter and same format when converting to biggor or smaller
types.
Type: refactor
Change-Id: I443d67e18ae65d779b4d9a0dce5406f7d9f0e4ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Building VPP using gcc-10 fails because of the array bounds check
error for function ip4_header_checksum(), with option field in IPv4
header exceeding the ip4_header_t bound. Fix this error by turning
off the array bounds check option for function ip4_header_checksum().
Change-Id: I68cc241ae9e403d35ac2e320549506dc6565a0b6
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: Ie29dec803aa4ee02755190b09573c23f9b5f0ada
|
|
This is the code refactor for vnet/flow infra and the dpdk_plugin flow
implementation. The main works of the refactor are:
1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6
as the base the flow type
2. All the other flows are derived from the base flow types
3. Removed some flow types that are not currently supported by
the hardware, and VPP won't leverage them either:
IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU,
IP6_GTPU_IP4, IP6_GTPU_IP6
4. Re-implemented the vnet/flow cli as well as the dpdk_plugin
implementation
5. refine cli prompt
6. refine display info in command "show flow entry"
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I64a99a4fbc674212944247793fd5c1fb701408cb
|
|
Type: fix
Change-Id: I6c6d66ad8aa158be8d2b9d111de7d46473b9dc02
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: Ib5d7b7e4735a5dec6c3ed74068206a86782588ca
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia67662a5b988b3b5351cea21d6d92fb3a86629b5
|
|
This patch adds the API for vnet/flow infra.
Currently this API supports the below flow types:
VNET_FLOW_TYPE_IP4_N_TUPLE
VNET_FLOW_TYPE_IP6_N_TUPLE
VNET_FLOW_TYPE_IP4_N_TUPLE_TAGGED
VNET_FLOW_TYPE_IP6_N_TUPLE_TAGGED
VNET_FLOW_TYPE_IP4_L2TPV3OIP
VNET_FLOW_TYPE_IP4_IPSEC_ESP
VNET_FLOW_TYPE_IP4_IPSEC_AH
VNET_FLOW_TYPE_IP4_GTPU
All the above flows are tested with Intel E810/X710 NIC
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Icb8ae20cab9bdad6b120dddc3bd4fb1d85634f3f
|
|
Type: fix
In ip6_neighbor_probe(), if the interface is not enabled for ip6,
return NULL and skip trying to build a packet.
If the interface is not enabled, its mcast adjacency will be set to
~0 and a seg fault will ensue.
Change-Id: I825c9f40a0d5b2a77f788ac8dbd618138706383d
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
- check input sw_if_index to make sure it is sane. Coverity actually
complains about it.
- return rv. Some of the APIs handlers were not passing back the rv.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I8378ea948af561ba2bd9b02fb10bf4f9df2a2cd2
|
|
Type: feature
Change-Id: I041bff2e8d589c171661de286fa1503531dff891
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I205f7c146a213d603d9d1e46fcf5195a876608dc
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
Change-Id: Ic8db52b41d7e5af3425099f008984e50afb3da74
|
|
Type: refactor
Change-Id: I7342178f9ab9adb99b91a4f984bc22bef2ce8021
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Make sure payload_proto variable is set properly in vnet_ip_mroute_cmd()
function. This avoids using an uninitialized payload_proto value which
could lead to assertion failure when using e.g. the ip mroute add
command.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I8b1d1df02e80150836b7b0448814d8f99747eeed
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie70348406a2bfc156302687d2f5f98bc1a50c88f
|
|
Type: feature
Change-Id: I5868dd267aa26aa97aec5fd70e70c5956ac52277
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: Ia19d3611e596d9ec47509889b34e8fe793a0ccc3
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
vrf table may be dynamically added or deleted. When the table is deleted,
clients who use the corresponding vrf table may need a callback to
do the clean up. The mechanism added here is cloned from
VNET_SW_INTERFACE_ADD_DEL_FUNCTION.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I08635c715cd7361a6c359b90890dd3545b0da94c
|
|
Currently, mutlti-threads only support one dispatch thread and multiple
worker threads, eventually only dispatch thread is a vcl worker and can
interact with epoll.
This patch will register all threads as vcl worker, and then each
thread can interact with epoll now. Moreover, session migration also
supported, such as socket created in thread A and used (bind, connect
and etc.) in thread B.
Type: feature
Signed-off-by: hanlin <hanlin_wang@163.com>
Change-Id: Iab0b43a33466968c1423d7d20faf1460c8589d91
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I664cd14c84fc5cf2ffe61efce99c95219b44fad7
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ibad744788e200ce012ad88ff59c2c34920742454
|
|
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2e53fa85a0b4082666f57a3a58a09c04ae2001b5
|
|
- switch to using vlib_time as reference for timestamps
- use us precision ticks for tcp but keep using ms precision for
timestamps. As a result, srtt, rttvar and rto are now measured in us
instead of ms. MRTT samples from timestamps are converted from ms to
us (not accurate under ms) while high precision samples are used with us
precision, i.e., they're no longer converted to ms precision samples.
Type: improvement
Change-Id: Ibda559575d9b4fdc85b0985264f7c865ff367e34
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Reorder delayed packets, i.e., flush instead of delay, with a configured
rate.
Type: feature
Change-Id: Ib1294f5f1c9b6e98a12b1bb0be655e54facfed3a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Before this patch it was not allowed to replace
a dynamic ARP entry with a static one with the
same mac-address.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I6cfc0e510ffdf141c61874288f11a60395182374
|
|
Type: improvement
Change-Id: I379ba4270dad56fb0a06427a43e97bed36bdaa13
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
A predicate function which says whether a given sw_if_index has a
certain feature enabled.
int vnet_feature_is_enabled (const char *arc_name,
const char *feature_node_name,
u32 sw_if_index)
returns 1 if the feature is enabled
returns 0 if the feature is not enabled
returns VNET_API_ERROR_INVALID_VALUE if the arc name is not found
returns VNET_API_ERROR_INVALID_VALUE_2 if the feature node name is not found
returns VNET_API_ERROR_INVALID_SW_IF_INDEX if the sw_if_index is not found
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id9ed53e2ae9252efc750ae80fd610456b95cefa4
|
|
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: Ieddf8f03fdd14e71efaf4c78fe5b7f0d15c5cf5a
|
|
Type: fix
Change-Id: Ia5c1f928f6752314b278127d2446e973f03a5da8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I0cafe08d21e02094dda203c5eb60601b5953425d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
For bond interface, we set hardware link state to up initially when
admin state is set to up. Thereafter, if we toggle the admin state to
down and up, we require at least one active member in the bond prior
to bringing up the hardware state which is inconsistent. The fix is to
remove the unnecessary condition.
This is a rework of the original proposed patch which is more complex
and could be tricky to get it right
https://gerrit.fd.io/r/c/vpp/+/27141
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I65f4fee55299b5b4d5645f6e05e1be15b46b73cd
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia77ce41a8f1a032c5e027c4bb47347752cfda0a9
|
|
Type: fix
Change-Id: Idb6f82e08b29e3805ed2133acb5fd7226148f672
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|