Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Connect ctrl message recently outgrew the maximum ctrl msg size, so
increase the limit. Also add static asserts for messages that could
potentially exceed the limit.
Change-Id: I0d3e32e0d4d67d7e222cff14ddba59a0c3fb8b00
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I6164ad0d97cd91b60c85302eff691836d12a0a70
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In bond RX quad loop, when all packets within the frame have the same incoming
interface, we cannot skip calling bond_update_next because that function calls
vnet_feature_next() to update the b->current_config_index. The next node needs
the correct b->current_config_index to work with.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3d8b3d4e0f95490f406fae7638f0c43c301ce664
|
|
Type: feature
Add 'drop' and 'redirect-to-queue' support in
'test-flow' command and DPDK plugin
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I567bb77cb401c9bd1309ecabe802fe9de88c746b
|
|
Type: fix
Change-Id: I82308e368d14d84f5970dad229bdcf2de7d1839d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Ie63b80db56febc8a16bafcdd5399b2f92b6aa437
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Ica069e8c9dd4efd1f00639754da471bf11418b57
|
|
Type: refactor
Change-Id: Ib4a8e7e64093b2db1deda6663325080bc8337605
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I51d5bf54dfd408aa0c406cbdf0f4be10ef19d10d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: Ib7ac53d1b59b641ccd3b1d733107d7f1ba174314
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Use api with explicit thread index to retrieve tls contex on close.
Change-Id: Ibdc4338747300b7fc8f91ef3e10bcd48ce7ae366
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
gid_ip4_table_t's and gid_ip6_table_t's are allocated from pools. They
MUST NOT be listed on the clib_all_bihash list to avoid dangling
references.
Switch to the clib_bihash_init2 API, which has the required knob.
Type: fix
Ticket: VPP-1788
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I49a17e937922c3af2e1c46b24e20883af51584a8
|
|
Type: refactor
Change-Id: Ib5e2ecf55732599e1322736e3662178c9da49c7d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This change adds tracing of IP headers when doing a handoff between
worker threads. This eases debugging.
Type: feature
Change-Id: I2195b070a364cba13a658ec1cee5154fc4c3a8b0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: Ie436d51999dc1384a0db492f28a7e66620e14551
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
vnet_feature_enable_disable takes sw_if_index, not hw_if_index. If there
is a subinterface created prior to the slave interface is created,
sw_if_index and hw_if_index start to diverge and the problem will happen.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I11e1f099378832f83b748526c6cbeb56960fad3c
|
|
Rest pacer on ack reception if we haven't recently sent anything.
Type: feature
Change-Id: I820bacd81b65130052dfafbfcbe6ca4553069fbc
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Add heuristic that detects lost retransmitted segments and retries
sending them.
Type: feature
Change-Id: I34d1bb16799e1993779222eb2bfad4b40704159e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The non-extern declaration confuses clang linker in debug mode.
The function is defined as inline above anyway.
Type: fix
Fixes: c6215d902f
Change-Id: Ic7e4477631cf0bcfb31ab3f81effe3642dd4223e
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I865534de9f16bff586106e0850f131de1e9cbf24
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Based on the configuration, we can disable checksum offload capability
and calculate checksum while pushing the TCP & IP header.
This saves some cycles when VPP stack is used in legacy hardware devices.
Signed-off-by: Srikanth A <srakula@cisco.com>
Change-Id: Ic1b3fcf3040917e47ee65263694ebf7437ac5668
(cherry picked from commit 3642782a2748503f5b5ccf89d1575c1d489948ef)
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: Iddb6fd41812e8c97af58859ef43279cfc0f9d1df
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Type: fix
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: I9e98b1622785e58484bf316ef491e44cfb06bcb7
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I1964e4f0afe6f030ae9c8e28fcba5fd81aa1f130
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <Ryujiro.Shibuya@owmobility.com>
Change-Id: I8e1f6cbd905ad5c21aed1b2e358540d0fbd7fc47
|
|
Remove map's implementation of reassembly and use common
ip6-full-reassembly functionality. This makes it easier to maintain by
removing duplicate code/functionality.
Type: refactor
Change-Id: I430e888b704e28c100a9ce075d1460cb529e4676
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Change-Id: I22e2ef34631c9432311ff6457504e0649e0512b4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Fixes: 0eb75d0e9c7624a4e8ac69fea7dbe12d39b75096
Change-Id: I8bcdc06b33bf4e12752b90dc3445fa51af552a46
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
New callback vnet_hw_interface_add_del_mac_address().
Add or delete secondary MAC addresses on a hardware interface.
This will allow packets to be processed which have a destination
MAC address other than the primary programmed MAC address without
needing to put the device into promiscuous mode.
Change-Id: I6beecbcb8932fc1fe45b567f76fa3706feefae2c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: Ie4372c5cf58ab215cdec5ce56f8a994daaba2844
|
|
otherwise they get installed twice and the reference counting means they are not removed.
This is the same behaviour as IPv4.
Type: fix
Change-Id: I9266e04ccff6ff06a577e85973a2ddbeb9dfc52b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
they can use the 'auto' adj for all traffic
Type: fix
Change-Id: Id2b9557683252a94badc8f9dfab5f7b2ae26f1ee
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
This patch does the following conversions
TLS_ENGINE_X -> CRYPTO_ENGINE_X
tls_engine_type_t -> crypto_engine_t
It does not change numbering of engines
Change-Id: I872dfaec3a6713bf4229c84d1ffd98b8b2419995
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
This changes the behavior of both API calls
APPLICATION_TLS_CERT_ADD & APPLICATION_TLS_KEY_ADD
certificates and keys aren't bound to an app, they are
passed to it via connect / listen using the message
queue.
This should be followed by a per protocol (QUIC/TLS)
crypto_context store to save devrived structs
Change-Id: I36873bc8b63b5c72776c69e8cd9febc9cae31882
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: I7c38d2ad6364f098529f51c15b533eb234b82716
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: refactor
Change-Id: I4f370b09e22dbbc8920272df9a042dae04825bfc
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Add SESSION_F_IS_MIGRATING flag for session. It is set by the session
layer before poking the transport for migration. It's the transport
responsibility to unset the flag & act apropriatly if RX happens on
a migrating session.
Change-Id: Ie722917f1cf9344d8f041cad4ed8b064fb5853b6
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: Ia714c2e46627864091d3f686dbced4cdd9c1a773
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
In a rare event, after the vhost protocol message exchange has finished and
the interface had been brought up successfully, the driver MAY still change
its mind about the memory regions by sending new memory maps via
SET_MEM_TABLE. Upon processing SET_MEM_TABLE, VPP invalidates the old memory
regions and the descriptor tables. But it does not re-compute the new
descriptor tables based on the new memory maps. Since VPP does not have the
descriptor tables, it does not read the packets from the vring.
In the normal working case, after SET_MEM_TABLE, the driver follows up with
SET_VRING_ADDRESS which VPP computes the descriptor tables.
The fix is to stash away the descriptor table addresses from
SET_VRING_ADDRESS. Re-compute the new descriptor tables when processing
SET_MEM_TABLE if descriptor table addresses are known.
Type: fix
Ticket: VPP-1784
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3361f14c3a0372b8d07943eb6aa4b3a3f10708f9
(cherry picked from commit 61b8ba69f7a9540ed00576504528ce439f0286f5)
|
|
Type: feature
Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Include a binary API change NOT suitable for cherry-picking into 19.08
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id369514a3085f5e4bcee34819c55c4636df9b518
|
|
Type: feature
Change-Id: I0e049b28d8c21b67ea4545e865eda4e88f10e485
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I256ef153b3b27a1f7ab7daa45015a2ec4bc84076
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I79589f648f4c75762e5277fb94636a91fa36ccdd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: Ifcbfeecd6ca1215ec473eec4cce736ab4eacde80
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I7ed9726d8c5ca26715a84b004a18fd7f93142486
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Missing an increment in the while loop. Hashes not stored in the array.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I603027f5a7305478f48a102ac8035ffde9102c53
(cherry picked from commit 0471cdbd3fe04a88a8b70b5f0eff0c378e19abf7)
|
|
Type: fix
Change-Id: I35fb6fdfba50c4a59cf1ffb94cb51487bcf5afc9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I46b166b3a10c4543eafa4422531dd3c725db45f1
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Allow for setting the maximum number of generated packets to be included
in the frame passed to next nodes. This is very important for testing
code which may be susceptible to multi-frame vs single-frame bugs (e.g.,
code that is doing re-ordering where packets may be buffered between
frames).
Update:
- remove redundant packet "rate" option.
- reduce n_max_frame to u32 as that's what pulled from the CLI.
Type: feature
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: Ie362bbb110b2cf01d9f65c559bbe9101e17b7fdc
Signed-off-by: Christian Hopps <chopps@labn.net>
|