Age | Commit message (Collapse) | Author | Files | Lines |
|
A distributed virtual router works by attmpeting to switch a packet, but on failing to find a local consumer (i.e. the packet is destined to a locally attached host) then the packet is sent unmodified 'upstream' to where the rest of the 'distributed' router is present. When L3 switching a packet this means the L2 header must not be modifed. This patch adds a 'l2-bridge' object to the L3 FIB which re-injects packets from the L3 path back into the L2 path - use with extreme caution.
Change-Id: I069724eb45956647d7980cbe40a80a788ee6ee82
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- always use 'va_args' as pointer in all format_* functions
- u32 for all 'indent' params as it's declaration was inconsistent
Change-Id: Ic5799309a6b104c9b50fec309cba789c8da99e79
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
Change-Id: I7b175d57b85e626aab00221b6dac0498aebcbeae
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I58772a83e22885a9ea8a7a981d2bcb4b31a050d2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1. Add VNET headers support for checksumming - required
to operate correctly on any recent Linux
2. Bypass QDISC on transmit - improves performance by ~ 5%.
Enabled only if the macro is detected - apparently not
present on archaic distributions.
This still does not solve all issues with TSO - it can be
fixed only by going to tpacket v3 and dynamic rx ring as
well as significant changes in the TX (sendmmsg?).
Change-Id: Iea14ade12586c0a8da49e6dd1012108a08bc85b3
Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
|
|
Add an API request message type to dump IPsec SAs. Either
all IPsec SAs can be dumped or it can be limited to a single
SA ID (numeric ID set at creation time - not an index).
Add a handler for incoming messages with the new request type.
Add an API response message type containing the data
for an IPsec SA.
Add VAT support for new message type.
Change-Id: Id7828d000efc637dee7f988a87d3f707a8b466b7
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change L2 learning path so it update stale timestamp in MAC entry
only if aging is enabled on the BD for the MAC entry.
Change-Id: I7babe986ceef3c030d8ef9185076c42b405f7b0f
Signed-off-by: John Lo <loj@cisco.com>
|
|
- add separate TIME_WAIT time constant
- fix output node for TIME_WAIT acks
- ensure snd_nxt is snd_una_max after retransmitting fin
- debugging improvements
Change-Id: Ic947153346979853f2526824b229126e47aead86
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Teach vpp_api_test to send/receive API messages over sockets
- Add memfd-based shared memory
- Add api messages to create memfd-based shared memory segments
- vpp_api_test supports both socket and shared memory segment connections
- vpp_api_test pivot from socket to shared memory API messaging
- add socket client support to libvlibclient.so
- dead client reaper sends ping messages, container-friendly
- dead client reaper falls back to kill (<pid>, 0) live checking
if e.g. a python app goes silent for tens of seconds
- handle ping messages in python client support code
- teach show api ring about pairwise shared-memory segments
- fix ip probing of already resolved destinations (VPP-998)
We'll need this work to implement proper host-stack client isolation
Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Identify and complain when the same IP prefix is assigned
to two different SW interfaces:
vpp# set int ip address TenGigabitEthernet6/0/0 1.2.3.4/32
vpp# set int ip address TenGigabitEthernet6/0/1 1.2.3.4/32
set interface ip address: Prefix 1.2.3.4/32 already found on
interface TenGigabitEthernet6/0/0
Change-Id: I1aee1b6a7ddd00d3109a53d8e1b6ce97bf45e372
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
fixes an issue where events were not sent if BD doesn't enable mac aging
Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
When making a call to vlib_packet_template_get_packet(), it
is possible to get back a NULL if the system runs out of buffer.
This can happen when there is buffer leaks. But don't crash
just because we run out of buffers, just punt.
Change-Id: Ie90ea41f3dda6e583d48959cbd18ff124158d7f8
Signed-off-by: Steven <sluong@cisco.com>
|
|
It was observed that under heavy traffic, VPP accidentally sent traffic
with the wrong source and destination to the tun/tap interface. Traffic
appears to be sent to the wrong direction. This problem is only
seen when worker thread is configured.
When worker thread is used, TX and RX may reside in different
core. Yet both TX and RX threads are sharing the same global variable,
namely iovecs without any mutex or memory barrier protection.
This creates a race condition when heavy traffic is blasted to VPP,
like 1000 pps.
We could create a mutex or memory barrier to ensure atomic memory access.
But why bother? It is a lot cheaper to just decouple the iovecs such
that TX and RX have their own iovecs.
Change-Id: I86a5a19bd8de54d54f32e1f0845bae6a81bbf686
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ib675164c475edcdbe3013df7b847adf5e050c53f
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
On host interface if a VLAN tagged packet is received, linux kernel removes
the VLAN header from packet byte stream and adds metadata in tpacket2_hdr.
This patch explicitely checks for the presense of VLAN metadata and adds it
in VPP packet.
Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa
Signed-off-by: Akshaya N <akshaya@rtbrick.com>
|
|
174267: Revisit this string termination issue
174816: Add check for NULL when trace is enabled
177211: Add notation that mutex is not required here
177117: Added check for log2_page_size == 0 and returns an error if so
163697,163698: Added missing sw_if_index validation
Change-Id: I5a76fcf6505c785bfb3269e353360031c6a0fd0f
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I2cf4c4850b9c3c093a7dce0cec89b9f710f69393
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Update ping code to use the new function
Change-Id: Ieb753b23f8402cbe5667c22747896784c8ece937
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I365c31607332a944ef498369881332b515894ed7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
For bonded interface in Active/Backup mode (mode 1), we need to
send a GARP/NA packet, if IP address is present, on slave link
state change to up or down to help with route convergence. The
callback from DPDK happens in a separate thread so we need to make
sure RPC call is used to signal the send_garp_na process in the
main thread. Also need to fix DPDK polling so the slave links are
not polled.
Change-Id: If5fd8ea2d28c54dd28726ac403ad366386ce9651
Signed-off-by: John Lo <loj@cisco.com>
|
|
When changing the admin state of a vhost-user interface, do not put it
in link-up mode if the interface is not actually ready.
Change-Id: Idbc631a7126efa79d199909f9e7656d21bd412ca
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
wildcard ND events publisher was sending the last event mutiple times
Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ie3a99f09f44ec081d9b88a213bdb8d987fb462de
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib5d335d6130617d6135615c6c8fa8deaac971331
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
When given a single IPv6 address, the "tcp src-address" command incorrectly
infers the end of the range by copying sizeof(ip4_address_t) bytes from the
given address.
Change-Id: I100d5c6674d3a3980b8c018588988bdd32ff7269
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
Until now, if the stack didn't find a connection for a packet, it sent
back a reset. With the punt option enabled, packets are now enqueued to
error-punt where they can be handed off to the host os.
Change-Id: I12dea8694b8bd24c92b0d601412928aa7b8046cb
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Fix dhcp_client_for_us() function to utilize rpc_call_main_thread
to call vlib_process_signal_event() to ensure proper handling
irrespective of it being called in main thread or worker thread.
Added ASSERT to vlib_process_sinal.. path to make sure it is called
in main thread.
Change-Id: I4109cc049d8e4225d896ce492ce201011dc9c911
Signed-off-by: John Lo <loj@cisco.com>
|
|
ip4-local feature arc existed but not ip6-local one.
This patch also adds node name to the 'show ip local' command and fixes
a minor include issue in vnet/ip/ip4.h file.
Change-Id: I9bb8a7159917d58f89afcce974680de20d946a70
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
- add preallocated segment flag
- don't remove pre-allocated segments except if application detaches
- when preallocating fifos in multiple segments, completely fill
a segment before moving to the next
- detach server application from segment-managers when deleting app
- batch syn/syn-ack/fin (re)transmissions
- loosen up close-wait and time-wait times
Change-Id: I412f53ce601cc83b3acc26aeffd7fa2d52d73b03
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I831226111d26f5c8a795e0773e23fddcddfb1613
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0f1a051dd3b5786dc7c457bc6fc7ce4fcd0f530c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
For routed IPsec, set the RX sw_if_index on inbound packets
to the index of the IPsec interface. When a packet is
decrypted into a new buffer, bring along the RX sw_if_index
of the encrypted packet to the new buffer.
Change-Id: I093e9d37def2082c8d2f1deb96b1c5b97126e023
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I1f3c0f879f636e587aa518c41e5ad99af65129a7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Checksum offload is implemented in VXLAN encap over both IPv4 and
IPv6. It is enabled, however, only for VXLAN over IPv6 because UDP
checksum is needed only for IPv6 and optional for IPv4.
Change-Id: Ib879f4f6da7346ba5e079d321c1dfd630f5058b8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ifda4d22c9d1de210165932a0996f75cc8428ae7a
Signed-off-by: Alberto Rodriguez-Natal <natal@cisco.com>
|
|
177117: fstat() returns -1 on error; the code is
checking for any positive value instead
175142: final return could never be reached; simple
refactoring
175235,175236: Warning suppressed with an explicit
cast to (void)
174817: Final return couldn't be reached; is
is_in_order is 0 then 'rv' is already returned
above
172095,172093: If is_is_set does not get set to 1,
then return 0 has already been invoked
174405: Re-kill this (nothing sets rv)
171136: Looks like a cmd line flag to set test_bytes
was missing; added it, and refactored the
argc/argv processing to avoid two other
potential segv's
176813: Add range checking for term width/height.
First stab at a reasonable range is 1-512
for both.
175350: Fix implicit casting in shift operation
174272: Not a c+p error; try using a coverity
annotation to ignore it
174273,175320: Annotated FORWARD_NULL
Change-Id: I58d0f860fc2209f59f8d1b6b344d631b8d429ace
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
previous mechanism was emitting duplicates of last event, when handling multiple arp queries.
tests:
* arp events sent for graps
* duplicate suppression
* verify no events when disabled
Change-Id: I84adc23980d43b819261eccf02ec056b5cec61df
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Use buffer pre_data and existing buffer trace trajectory code to
find out dpdk buffer leakages.
Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iff33694fc42cc3bcc73cf1372339053a6365039c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia886ff2bfa2cf33ffbaa35ec89494d4300ec2769
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
- added per-interface simple/combined counters
- refactored fib/nbr API to use common registration scheme
- refactored "want_stats" and "want_interface" to use
per interface registration scheme
- fixed issues with SEGV when client disconnects abruptly.
Change-Id: Ib701bd8e4105d03548259217bfc809bd738b7c72
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: I972e6e645c3ae9cba4bb2b4e32c0272dfd67e87b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- do not scale syn-ack window
- fix the max number of outstanding syns in builtin client
- fix syn-sent ack validation to use modulo arithmetic
- improve retransmit timer handler
- fix output buffer allocator leakeage
- improved debugging
Change-Id: Iac3bc0eadf7d0b494a93e22d210a3153b61b3273
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ifef8a9328bb865f6ddb041bafe3699153f89755a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
part 2;
- this adds the code to create an IP and MPLS table via the API.
- but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass.
Change-Id: Id124d884ade6cb7da947225200e3bb193454c555
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This will allow us to use this code in client libraries without vlib.
Change-Id: I8557b752496841ba588aa36b6082cbe2cd1867fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0f58100a944e36f5b530101178303d4595b3207f
Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
|
|
Change-Id: Id79d2c2be7a98e15416a537c890a8f2dd6d4464d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|