Age | Commit message (Collapse) | Author | Files | Lines |
|
Length check must also take current_data into account.
Type: fix
Change-Id: I7a1b1752868892d40f59490d05452ef24565cca6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
In the current implement, tcp would start or up an one tick
retransmit timer for that connection if vlib_buffer_alloc()
return 0. Now the tick is 0.1ms, this means that if VPP is
in a buffer shortage state, there would be a large number of
burst timer expirations.
This commit limits the minimum interval of the retransmission
timer to 100ms.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: Ia11d693fe46119c5dc16b24ca93c30c31109057a
|
|
Type: test
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iec69d8624b15766ed65e7d09777819d2242dee17
|
|
Type: feature
this allows VPP to simulate linux tun devices.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3adf38b49a254804370f78edd5d275d192fd00a6
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ied2608e7a28c59c908803ca676abbe93072fadb8
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I338e61654a62ed6308ecd8bb15e1a8b13cd859b9
|
|
TCP and (D)TLS clean up half-opens on main without a lock/barrier so
cleanup initiated from first worker, e.g., cut-throughs, can corrupt the
session pool.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2e5162831c0e201b22454f17fe55bfac44b85fa9
|
|
Type: fix
This prevents reordering when a push flag is received.
GRO appends the segment with the push flag to the existing
flow and flushes it immediately.
Change-Id: I61b36209b3381f340594a9cb3ed816d43b02bdff
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
VRRP prefix length is 5 bytes, doesn't make sense
to compare with 6 bytes mac address
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I70a9c9ca769f34a81cd568f9e6b9a3538e6ec710
|
|
The path pool can expand during in fib_path_attached_next_hop_get_adj()
when calling adj_nbr_add_or_lock(). If dpo points to a path->fp_dpo, its
reference becomes stale.
Use a temporary copy instead.
Type: fix
Change-Id: Ie966cb5f3f7b416425964dca12f1f586bfc2010c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The adj can be deleted during fib_walk_sync(), make sure it can happen
only after clearing the SYNC_WALK_ACTIVE flag.
Type: fix
Change-Id: I68be00e9602e2783d9dced71c51547c38b7e8a00
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
If an async crypto frame is allocated during ESP encrypt/decrypt but
a buffer/op is not subsequently added to the frame, the frame leaks. It
is not submitted if the count of async ops is zero nor is it
returned to the frame pool. This happens frequently if >= 2 worker
threads are configured and a vector of buffers all have to be handed
off to other threads.
Wait until it is almost certain that the buffer will be added to the
frame before allocating the frame to make it more unlikely that an
allocated frame will not have any operations added to it.
For encrypt this is sufficient to ressolve the leak. For decrypt there
is still a chance that the buffer will fail to be added to the frame, so
remove the counter of async ops and ensure that all frames that were
allocated get either submitted or freed at the end.
Change-Id: I4778c3265359b192d8a88ab9f8c53519d46285a2
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: style
reduce the number of files recompiled after changing pg.h from 1110 to
102.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I50611eba818eeb3a2dffd437a3c72c77766bed80
|
|
When both chained and non-chained buffers are processed in the same
vector, make sure the non-chained buffers are processed as non-chained
crypto ops.
Type: fix
Change-Id: I19fc02c25a0d5e2e8a1342e2b88bbae3fe92862f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
handle
an exception
Type: fix
Signed-off-by: jinshaohui <jinsh11@chinatelecom.cn>
Change-Id: I67b7d0b52c33a5b13ace8fe2d918139d2820e9bf
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I99af136ecab9be1f9e00de6d197b8f1c74ab4b20
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia46b0b8afed30f84b244c06f0457303f9e8832cd
|
|
When adding a route via a udp encap instance, FIB_ENTRY_FLAG_IMPORT
should not be set. In particular, fib_route_attached_cross_table should
always return false for such paths.
Modified test_udp_encap to leverage the bug that needed to be fixed.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: Iaa9489e96d1cff09751f92c62caf7999d924fd7f
|
|
We do not want to encap headers containing wrong checksums.
Additionnally, this clears the checksums offlads flags, which
was something missing since the outer headers checksums were
calculated during the encap. Hence, those should not be
recalculated afterwards.
Type: fix
Change-Id: I7fd07987b4f13f76c6990a1c08dc2f960bdd8de1
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
Unless a software interface is actually unnumbered, do not set
ip[46]_main.lookup_main.if_address_pool_index_by_sw_if_index [sw_if_index]
to ~0
Fixes this scenario:
loop create
set int state loop0 up
create sub-interface loop0 1
set interface ip addr loop0.1 192.168.1.1/24
delete sub-interface loop0.1
set int ip addr loop0 192.168.1.1/24
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I46141d862fa57d70b93d7bb0c105403708165264
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifbf43dd69aa07be485fe7fa01c917512e423036e
|
|
Possibility to register a port via CLI or API to decap incoming UDP
packets:
- For CLI, a user needs to specify the inner protocol (only MPLS
supported for now)
- For API, the protocol is specified by index
Added unittests
Type: feature
Change-Id: Ifedd86d8db2e355b7618472554fd67d77a13a4aa
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
|
|
Type: fix
Change-Id: I7ada1b780b5c40261f6b14cfadc3f382e4e39086
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
set interface tx-queue tap1 queue 2 threads 1-2
show hardware-interfaces tap1
Name Idx Link Hardware
tap1 2 up tap1
Link speed: unknown
RX Queues:
queue thread mode
0 vpp_wk_1 (2) polling
TX Queues:
queue shared thread(s)
0 no 0
1 no 1
2 yes 1-2
3 no 3
4 no 4
Ethernet address 02:fe:09:3a:48:ff
VIRTIO interface
instance 1
set interface tx-queue tap0 queue 4 threads
show hardware-interfaces tap0
Name Idx Link Hardware
tap0 1 up tap0
Link speed: unknown
RX Queues:
queue thread mode
0 vpp_wk_0 (1) polling
TX Queues:
queue shared thread(s)
0 no 0
1 no 1
2 no 2
3 no 3
4 no
Ethernet address 02:fe:03:6a:66:fc
VIRTIO interface
instance 0
Change-Id: I6154476ec9ff0b14287098529c88a14b779371a5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
This was limited to HW interface types (for historical reason AFAICT)
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3785a356ae31722fa60d84f64ec9aa53ebdd615f
|
|
a uRPF check on a for-us packet is done in the correct VRF
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iafa6efea0d96962aa9136dccefc148a961f74476
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic5e99938a5f130e83de6d590d2f89252d055bceb
|
|
Type: improvement
Change-Id: Idb48f835730db6c652c4b0e6ef310c7f36599a72
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Avoid grabbing the worker barrier if there's no work to be done.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ice3de5df41cd1752aba3419ad2e2dd82f30e9bfb
|
|
Type: improvement
Change-Id: I873a99c1258a97ed5ed195b9756e8302f865e7f0
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
The same value is used for other tunnel types.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6593001918993d65f127cc9f716c95e932239842
|
|
Type: fix
If a GRE tunnel is created and the peer is not resolved yet and an
IPv6 route is added which points to the tunnel, packets matching the
route will be dropped. When the tunnel peer is resolved, adjacencies
on the tunnel interface should be restacked and packets matching the
route can be encapsulated and sent..
There is a loop that is intended to do this for both IPv4 and IPv6.
The call to walk adjacencies is invoked in a "return" statement though.
So the loop is exited and the function returns before IPv6 adjacencies
are walked.
Remove the return so the loop finishes.
Change-Id: Ia4f695681713020209ea490ae4142857cea49c41
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7c47b55ec6f0c83f2d13e0e737d0559a32f7c837
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I47d241a8f2f9e9d0761d14dcddd3327c3b28932c
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I750c856ac81d951e8c0e62c710e0f35a0c80d6f9
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie4e3623e7e00456437fac5fb8f9c9083f1aa2a2e
|
|
Type: improvement
Change-Id: I6bb7b6d6bd63b044952ab981be5b0673144c9834
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iecc33fda7f28c037289775ffe0525a50f89a2b8c
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie8a15c50531f3ccd5f91dbc0779e4d9c0d146844
|
|
Avoids dispatching ctrl events generated while handling the
current pending list.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibeaf901ba4cf58a68fbd88e5ec3c23f6c2f6f145
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I10ec410fb7f3acb47128dda23510162dc13b20d0
|
|
Type: fix
virtio uses indirect descriptors for chain buffers.
indirect descriptor chain is mapped on a vlib_buffer_t.
Single descriptor is 16 bytes and vlib_buffer_t has
2048 bytes space. So maximum long chain can have
128 (=2048/16) indirect descriptors.
This patch adds check to make sure descriptors chain
len should not exceed 128.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I060cfb7709568f42c9b5634527172690ce66a1a3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifa47e1500e5cfb3c717f87b1d21131b9531c9005
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I24484a5192d7e683507ed640f75fb37914c0efb0
|
|
Half-open sessions are allocated by main thread and cleaned up on main
with timers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I37f000920a45908b62b5501ae9d54a88a9e4c609
|
|
Mechanical change for patch following this one...
Type: improvement
Change-Id: Iee12f3a8851f35569e6c039494a94fc36e83d20f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I59eb41516b5e052109428ae70660ed49126c25bb
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Fixes issue which causes crash in case when VPP only runs with main thread.
Type: fix
Change-Id: Ia0ca973bb7e7ff81f15b37764ae248e2502bdcec
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7f9c4b9b6e523ab549087ad21724f34f08fca793
|
|
Also adds support for half-open support transport migration.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id04c194138956336f93246bbed0332a7030c67e2
|