Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I45f540128e038ddb17ba96ce30965e8f7c732067
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I36e6878712c394de629a9182d2af24c53a8f811d
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Fix inconsistencies between admin and link interface states
Admin down should imply link down:
link_up = admin_up && link_ready
Change-Id: I4d668d82d035b5d2ae508727f34f1722a0c3e677
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I0caa5fd584e3785f237d08f3d3be23e9bfee7605
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Compute ICMP checksum for buffer chains
Fix checksum function for buffer chains
Change-Id: I39b845b94a63c3ab5fc9f6f9ab36cadbc67c104f
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
TLS can enqueue events to itself when app session queue cannot be
entirely drained. If a pending disconnect is handled before any such
event, session layer may try to dequeue data on deallocated sessions.
Change-Id: I5bfc4d53ce95bc16b6a01e1b0e644aafa1ca311b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icba9b0dc6dcb4b72288f966728201812d8d12144
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0c9c055fcc3d681c4032228a90cc81f484e200f0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I53e0e7d2cf1e3c52794830b33fa93d1582b74769
Signed-off-by: Yichen Wang <yicwang@cisco.com>
|
|
match against a packet's source address to determine
the VRF for the subsequent destination address lookup.
Change-Id: I48ee0ef54dcb891f0ec7f879e4d3b925a0ed0081
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I6b59df939c9daf40e261d73d19f500bd90abe6ff
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Add an "elog trace [api][cli][barrier]" debug CLI command. Removed the
barrier elog test command. Remove unused reliable multicast code.
Change-Id: Ib3ecde901b7c49fe92b313d0087cd7e776adcdce
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I798e4fb6470ae9e763f8de1c290ff0fc3c0b7f9e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I03bb47a2baa4375b7bf9347d95c4cc8de37fe510
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Currently, there are three variants available on aarch64, qdf24xx, thunderx2t99, and cortex-a72.
-DCLIB_N_PREFETCHES is passed to source code to select dual/quad implementation.
Besides, different compiler options are applied on these critical functions.
gcc-7.3.0 reports ICE(internal compiler error) with -mtune=thunderx2t99,
so -mtune=thunderx2t99 is enabled only when gcc version is greater than 7.3.0
Cavium ThunderX2, Impermenter 0x43, Part 0x0af
-march=armv8-a+crc+crypto -mtune=thunderx2t99
Qualcomm Centriq 2400, Impermenter 0x51, Part 0xc00
-march=armv8.1-a+crc+crypto -mtune=qdf24xx
Cortex-A72, Impermenter 0x41, Part 0xd08
-march=armv8-a+crc+crypto -mtune=cortex-a72
Change-Id: Id5649c6325c1e642d0fd42535e3908793b13e02a
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
|
|
Change-Id: I229ce9c306a97956c87ccb8f7a1c5c9dac94ab31
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Reduce per packet cost by buffering the output packet buffer indexes in the queue and
process the queue outside the packet processing loop.
- Move unnecessary variable initialization outside of the while loop.
- There is no need to save the old interface if tracing is not enabled.
Test result for 256 bytes packet comparison. Other packet size shows similar improvement.
With the patch
--------------
BondEthernet0-output active 52836 13526016 0 1.71e1 256.00
BondEthernet0-tx active 52836 13526016 0 2.68e1 256.00
TenGigabitEthernet6/0/0-output active 52836 6762896 0 9.17e0 127.99
TenGigabitEthernet6/0/0-tx active 52836 6762896 0 6.97e1 127.99
TenGigabitEthernet6/0/1-output active 52836 6763120 0 9.40e0 128.00
TenGigabitEthernet6/0/1-tx active 52836 6763120 0 7.00e1 128.00
bond-input active 52836 13526016 0 1.76e1 256.00
Without the patch
-----------------
BondEthernet0-output active 60858 15579648 0 1.73e1 256.00
BondEthernet0-tx active 60858 15579648 0 2.94e1 256.00
TenGigabitEthernet6/0/0-output active 60858 7789626 0 9.29e0 127.99
TenGigabitEthernet6/0/0-tx active 60858 7789626 0 7.01e1 127.99
TenGigabitEthernet6/0/1-output active 60858 7790022 0 9.31e0 128.00
TenGigabitEthernet6/0/1-tx active 60858 7790022 0 7.10e1 128.00
bond-input active 60858 15579648 0 1.77e1 256.00
Change-Id: Ib6d73a63ceeaa2f1397ceaf4c5391c57fd865b04
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Idc17b2f8794d37cd3242a97395ab56bd633ca575
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Split the stat_segment.c code from stats.c.
Rename stats.[ch] to prepare for removing (19.01?)
In addition stats.api can be removed.
Since the stats aggregation for the stat segment does not use the API, that
part is now done on the main thread. (Old stats aggregator is also left in place).
Change-Id: I9867429f4fc547b1a7ab7f88bc4f3625428d681b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Idf83fce8ca176e57b323e3741034e3223f1d195a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ied63ebaec8e19189f8b1ab2a7f6d7474c3f2ad6e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- Error where ICMPv6 error code doesn't reset VLIB_TX = -1
Leading to crash for ICMP generated on tunnelled packets
- Missed setting VNET_BUFFER_F_LOCALLY_ORIGINATED, so
IP in IPv6 packets never got fragmented.
- Add support for fragmentation of buffer chains.
- Remove support for inner fragmentation in frag code itself.
Change-Id: If9a97301b7e35ca97ffa5c0fada2b9e7e7dbfb27
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Before
------
DBGvpp# sh int rx-mode
sh int rx-mode
Thread 1 (vpp_wk_0^@):
node vmxnet3-input:
vmxnet3-0/b/0/0 queue 0 (polling)
Thread 2 (vpp_wk_1^@):
node vmxnet3-input:
vmxnet3-0/13/0/0 queue 0 (polling)
DBGvpp#
After
-----
DBGvpp# sh int rx-placement
sh int rx-placement
Thread 1 (vpp_wk_0):
node vmxnet3-input:
vmxnet3-0/b/0/0 queue 0 (polling)
Thread 2 (vpp_wk_1):
node vmxnet3-input:
vmxnet3-0/13/0/0 queue 0 (polling)
DBGvpp#
Change-Id: I5910d502757054c3942fac9d20c5104e95fc6b56
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I6c0d5aec6ee96a0d40358f0e09a0901b22265063
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I35dcb987edf11097f34a633ac36d87cecd12088f
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
bi0 always points to the first buffer in chain but b0 could be any fragment in a ip packet.
It causes a vnet_feature_next function call to the wrong buffer
and crashes sometime when there is >1 feature nodes under ip-unicast.
The fix is simple, makes b0 and bi0 both pointed to the first buffer
Change-Id: I7de36e68fb42b050fa63201abd98aeb6ba2e0cd3
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: Ie6a6dde1fdc0e4fa8560682072a69876867a88d3
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Change-Id: I0c3f2add35ad9fc11308b7a2a2c69ffd8472dd2e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7dd48c8a2c77f82a2c1aa8311b062f5f0bc4e3fd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I958bf057be751dc7b3a0d93080021b3addc405b7
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I21ad6b04c19c8735d057174b1f260a59f2812241
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9d3d5243841d5b888f079e3ea5dc1e2e8befd1dc
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
module: id SFP/SFP+/SFP28, compatibility: 40g_active_cable
vendor: Amphenol, part NDCCGF-I202
revision: C, serial: APF1711202351C, date code: 170318
cable length: 2m
Change-Id: Ife35607b4f078f7b56737fe066ad4cbd247a7504
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
set and check a special RX interface value as the packet enters and
exits a BIER domain
Change-Id: I5ff2f0e2d1b3ce0f3598b935f518fc11eb0896ee
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Idbe5f4d7f37dbe4dbf8d2679c3d816aeaed148d8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I49da8be88dd033aae1b190e8e2163069ef480442
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icff3d688506e7658330db004c58bcfcac273fcec
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
After the slave interface is removed from bond, bond input node still receives traffic for
the slave interface.
We have to disable feature arc for the corresponding slave interface.
Change-Id: I44e7001e6685e290b032c48147d02911a55d547b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: If833680149eb33db6adc836c5330f350042869f4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4a70c7df8f0cb368a4e1cb16f30eeef5c6058c79
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ibe57abc7d2a06be80146ce28edf4c60ecda991eb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
DBGvpp# show vhost-user
Virtio vhost-user interfaces
Global:
coalesce frames 32 time 1e-3
number of rx virtqueues in interrupt mode: 0
Interface: VirtualEthernet0/0/0�?x�D (ifindex 3)
The fix is to use format_vnet_hw_if_index_name rather than hi->name. The former
format the name with %v rather than %s
Change-Id: If4d275e1eb249cf87b2d6b796b42f24769f9e3e3
Signed-off-by: Steven <sluong@cisco.com>
|
|
change the ADD api so that is returns the 'ID' that can be used
by the client to read the stats from the stats segment and to
delete the object. Previously a similar value used required
to be chosen by the client, now VPP allocates one (like it
does e.g. for interfaces)
Change-Id: I563cf6092276eb990c52d5457c86e72546bcf69e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I397715ea8c1966f5ee61128f284d62d875c568e1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Have applications use explicit flag to request events from vpp when it
transmits from a full fifo.
Change-Id: I687c8f050a066bd5ce739d880eaec1f286038d95
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
route ADD API changed to return the stats segment index to use to read the counters
Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Two flags to disable mergable rx buffers and indirect
descriptors are added to api.
Change-Id: Iba0ee9c48d19dfc3d3420a3fdaf44a1a1d325e99
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I13dc5eab8835c4f3b95906816d42dccfeee8b092
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I487b3b480347f60ffe3af4029adfb22b6700cea7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|