Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I60f88d50f062b004e6dea487bd627d303d0a5e75
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
use address_t and mac_address_t for IPv6 and ARP entries
and all other API calls in ip.api aprat from the route ones,
that will follow in a separate commit
Change-Id: I67161737c2184d3f8fc1e79ebd2b55121c5b0191
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
in the case the tunnel is the only user of the shared path list
then removing its dependency removes the path list. hence lock the list
Change-Id: I18318441698ceac16715b1826266a7d19dcd76e1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If94c57fbb07a7376a9f2873e1489c00b28152620
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I9faaa321113e435844931247f23dbc1d190cc9da
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib1316482dd7b1ae3c27c7eeb55839ed8af9ca162
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I7bd43f57d23b1ecf031530c4a7508f949ddf616f
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: I36b3ae56e6ca160081c892367fd6a979751fe717
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I82dceaa27a7b0c96de077cf283e4f64aa426f271
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1554d9a4d6e4a4007cda9d0f83b03feb8fdbe853
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
this means we test the dumps - to some extent
Change-Id: I8d90745701012012b41a7b3aaf9be97b4dd2bdf8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
it was specified to 0 after https://gerrit.fd.io/r/16909
causes unformat_pg_ip4_header to wrongly set ip header len.
do more check when assigning e->lsb_bit_offset to avoid
negative value
Change-Id: Ib772c7135cdeb355f0d60f1ee11602f6b5a0ff21
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: Iaa57ace6df96bfacd1235c80ec7bb08e5f335530
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2ad54b20b96f10b009c3e651b2a2f885577ca5b6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
thanks, Eliot...
Change-Id: I8d8fee09bf1fe24933e6ef4e126dba8e22fe62b1
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
don't do the setup and teardown in class methods so that with
each test the config is added and deleted. that way we test that
delete actually removes state.
more helpful error codes from VPP for existing IPSEC state.
Change-Id: I5de1578f73b935b420d4cdd85aa98d5fdcc682f6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Adding "Mtrie mheap usage" in output of "show ip fib memory" command, for displaying the total Mtrie Mheap usage together with memery usage of each node and each table
Change-Id: I2bcc570924e44a2b406f69cfc2f2f8d5abb61a39
Signed-off-by: Lollita Liu <lollita.liu@ericsson.com>
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2e5fd45abcd07e9eda6184587889bdcd9613a159
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
We register callback for VNET_HW_INTERFACE_LINK_UP_DOWN_FUNCTION and
VNET_SW_INTERFACE_ADMIN_UP_DOWN_FUNCTION to add and remove the slave
interface from the bond interface accordingly. For static bonding without
lacp, one would think that it is good enough to put the slave interface into
the ective slave set as soon as it is configured. Wrong, sometimes the slave
interface is configured to be part of the bonding without ever bringing up the
hardware carrier or setting the admin state to up. In that case, we send
traffic to the "dead" slave interface.
The fix is to make sure both the carrier and admin state are up before we put
the slave into the active set for forwarding traffic.
Change-Id: I93b1c36d5481ca76cc8b87e8ca1b375ca3bd453b
Signed-off-by: Steven <sluong@cisco.com>
|
|
1. show packet-generator verbose, display all edit-groups and hdr-size
2. unformat_pg_payload, always mark payload hdr-size as 0
3. packet-generator now can change rate/limit/size at runtime
4. validate_stream checks buffer min-size/max-size against all edit
groups' header size
5. remove incorrect max packet size limit check in validate_stream(...)
Change-Id: Ic45e4f2b98bc0fd7330e0b480dd677fa3c69a677
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ieadf0a97379ed8b17241e454895c4e5e195dc52f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
exceeded
Change-Id: Id5b47f78521a0cbedf7bd2c72babfb2ffe9fa67d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I92af6455b50a49de4c912737fcd3b7787dd31de0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
allow routes that are local and connected to be added via the API.
this emulates the addition of a second address in the same subnet
added to an interface.
Change-Id: Ib18a08c26956be9a07b3360664210c8cf6734c84
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ica88268fd6a6ee01da7e9219bb4e81f22ed2fd4b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Id7fccf2f805e578fb05032aeb2b649a74c3c0e56
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
show interface
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
local0 0 down 0/0/0/0
pg0 1 down 9000/0/0/0 rx packets 582
rx bytes 34051
tx packets 4
tx bytes 364
drops 323
ip6 1
(nil) 580
----
show interface
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
local0 0 down 0/0/0/0
pg0 1 down 9000/0/0/0 rx packets 582
rx bytes 34051
tx packets 4
tx bytes 364
drops 323
ip6 1
mpls 580
Change-Id: I3dcde4799764277535baf42f855e4e8bb48c0d02
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ia083050389853c25b069f0f8286d50d3f4aef527
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Idb2839f6082bd2e052be2bc5417f0ebb43d1c0a6
Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
|
|
Change-Id: I376856fcadce570bb555064435f5876eefb2befa
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic5ba751c2bd2db9af4a21d3db40cc305d1208c30
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I6048c6a51efa826ac333f7d15919cb87dd766d74
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Idb224b807373128b78dc46f177b2d2e0ed288349
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This reverts commit 1e59f9ddbdda14591967e1d66eab8623f9ba58e4.
Change-Id: Iae1d372b887e170d28cac2fe4c61325ee5a5894a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iceb99d3f8b7029bd1b1e9ebafb1e0b3790c573e4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Avoid allocating session and possibly reallocating thread session pool
on builtin session rx.
Change-Id: I70e7c604678b44ce8d22603489e247a2c5faa439
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I7fb5402d4a530b5f2ffd9bb5787632099f4b4189
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Change-Id: I7e59ae718d2722c49d42b22a0874e1645a191e89
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Allow to display longer interface names, e.g. VirtualEthernet0/0/0.102
The field length (32) is now the same as for 'show interface'.
Change-Id: I1cb1efd459acb800bfaeeec40b672c8b17cd8c3d
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: Ied476c417c8ba5b4d7c615125c36eecd9ca64fbc
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic65f686aaccaf8450732d88d7471b587faccaa9d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I68cc509b594b09751ff5e0e09bbca187a4a88edd
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Ia95a75295e4865b4720573f164ccba8bcc7679ae
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I25b2a28513821bc5eab9ac6890a3964d412b0399
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I26f99d95f52c9fe107d17dcbbf5c6185523beade
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
- fixes in ip.api for dumping mroute path flags
Change-Id: I13b0cfb15d374250ed71bd4e13dda9b798c18204
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Implement API/CLI to clear IP-MAC tables used for ARP-termination
in the specified bridge domain.
The CLI to flush MAC IP tables for a BD is:
set bridge-domain arp entry <bd-id> del-all
The API added is bd_ip_mac_flush.
Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8
Signed-off-by: John Lo <loj@cisco.com>
|
|
It's not OK to crash due to a transient buffer allocation failure.
Return 1 if the requested operation failed, otherwise 0.
Buffer index parameter change to a value-result, so the caller can
differentiate between partial and complete allocation failure: callers
which request an initial allocation (inbound bi = ~0) need to check
the (out) value to decide whether or not to call vlib_buffer_free(...).
Change-Id: I03029d7f2714c17dca4630dfd95a1eb578b68384
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Set TCP checksum to zero, before calculate the TCP checksum.
Change-Id: Id96743334481804b8ebb74afef2f1dbfed29e0cb
Signed-off-by: Andrej Kozemcak <andrej.kozemcak@pantheon.tech>
|