Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibe39bc045c3b154209a83b59ef95a37c61b32c0c
|
|
Type: fix
Change-Id: I41455e1cdc62e7c0baa148630b0701b042f3b156
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Change-Id: Iac01d7830b53819ace8f199554be10ab89ecdb97
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This feature allows one to add classifier-based ACLs on packets punted
from the ip infra, eg. to only whitelist specific sender(s).
Type: feature
Change-Id: Idab37b188583efbca980038875fc3e540cb2e880
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
This adds an API message to do the switch
at runtime.
Change-Id: Ice6b69c57f0bfbf5668182e25593362ff4133615
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Tap fds are stored in vector array but deleting tap
was not freeing this vector.
This patch fixes it.
Change-Id: I5228e3b9f432c69cf2656b2ee7402360d775964b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
output_node_thread_runtimes was not freed when an interface
is deleted. This patch fixes it.
Change-Id: I763b0109be1904d43839528a346f3b9aa8927205
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
vnet_delete_hw_interface() calls vec_free on rx_queue_indices.
function vnet_hw_if_unregister_all_rx_queues() is used to free
rx_queue_indices which is also called by vnet_delete_hw_interface().
So, second vec_free is redundant.
Change-Id: Ibda4be38fd122d33532bb384c97b0b9e5f441134
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Tap/Tun interfaces do not have control queue.
This patch removes the support of control queue
from virtio_show() which is used by show tap/tun cli.
Change-Id: Ib89144ad488ed548fb1ce50ee232a1b8659ccf29
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
If the type is IPv4, makes sure the padding bytes are set to 0 as this
is used by ip46_address_is_ip4() to detect the type.
Type: fix
Change-Id: I6a81fa05a6b227086853901bf3dcdc66e6d04d2c
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I583c30e9b63c0b0b6cd5fef0b2cb9ed7ec9856e2
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
input_node_thread_index_by_queue is not being used anymore.
Change-Id: I0141fa0d024affb39771acf7516e064c5c8acfe9
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Subsequent features in the data-path can thus easily find the l3 header
without parsing the label stack.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I26f7d4bbe9186aeb8654706579c72424e8ecca2c
|
|
Type: improvement
Linux uses pseudo header checksum when checksum of l4 is offloaded.
This patch adds similar support in virtual interfaces.
Change-Id: I6a94d1104e59356f95057e7c122e3be9cd8659a3
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I29346c849a5e1ff3c2ea399671f9f50d075e9f18
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
When the API cleanup of classify messages was done, the code was not
updated to add the message enums to REPLY_MSG_ID_BASE. So the wrong
message IDs are being sent back in replies to classify API requests.
Add REPLY_MSG_ID_BASE when populated vl_msg_id on a reply.
Change-Id: Ic7c828f14d42a346fc58fc9ff062b954f494cdbd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Gaps in the sequence numbers received on an SA indicate packets that were lost.
Gaps are identified using the anti-replay window that records the sequences seen.
Publish the number of lost packets in the stats segment at /net/ipsec/sa/lost
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8af1c09b7b25a705e18bf82e1623b3ce19e5a74d
|
|
This fixes the interface creation passing
a netns. [0] made the renaming of the new
tuntap interface before switching netns
Thus, preventing creating an interface in
another netns if one exists in VPP's netns
with the same name.
This also fixes restore netns on errors
Type: fix
[0] https://gerrit.fd.io/r/c/vpp/+/33696
Change-Id: I5c83bb37d664057bcf231cd0c636f0e51aa542ad
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Pools fib_urpf_list_pool and fib_entry_pool can grow while ip6_urpf_loose_check/fib_entry_get_flags_for_source are being executed. That may result as a crash in mt environment.
Type: fix
Change-Id: I44ca2cb70255e7aaf2e1f7a7d2eecd25cbdd0aaa
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
Type: improvement
* add support for JSON format in API trace
* add ability to replay JSON API trace in both VPP and VAT2
* use CRC for backward compatibility check during JSON API replay
* fix API trace CLI (and remove duplicits)
* remove custom dump
* remove vppapitrace.py
* update docs accordingly
Change-Id: I5294f68bebe6cbe738630f457f3a87720e06486b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This is the last in the series of moving API messages from vpp/api/vpe.api to vlibmemory/memclnt.api.
This patch makes the remaining vpe.api messages dynamic, to help VAT2 binary-api command.
Moves the VAT test code to a separate file and removes the now unnused API meta files.
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I01dd78eaff1d3715dff17d2643bf0f7f0089935b
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
Change-Id: I027ff2c5c905a7ccebd3705a58e35218a94f4880
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Iefc88107ae96915570ae425a527c3969f7ce7b1d
|
|
Exported entries are tracked only when the prefix found in the export
FIB is really attached, exporter tracker is not set if the export
entry is not valid for export, ex. for special FIB entries - default
route, zeronet, mcast and broadcast prefixes.
When imported entries need to be purged, such unset exporter tracker is
being removed by non-initialized index with absent delegate entries,
causing corresponding assert and crash.
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: Ib24a2e7853a03a960577872480213e1e8097da5a
|
|
Type: fix
For some virtio backends, packets don't seem to flow
if all the queues that have been requested are not
initialized
Change-Id: I41765d668497ff954e6d69d36836590947fd93b1
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This has two benefits: fix an issue where small packets can be
padded to 64 bytes by the ethernet layer, and we included these bytes
in the tcp stream; and also if we receive a small packet, it signals
that this tcp stream is likely more latency-sensitive than throughput-
sensitive, and skipping gro buffering should be beneficial.
Type: fix
Change-Id: I165b97673d8cdce95ebf0a66c362ae9f9e6f3f34
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ia4065550a7ad1109e3a2592ef2c21b5e23fa85b5
|
|
Move control ping and change dependencies from vpe.api_types to
memclnt.api_types
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9f8bc442e28738c48d64d1f6794082c8c4f5725b
|
|
This prevents going through the same sequence every time the api is
called.
Type: fix
Change-Id: I3ca3587ab5d1c060e2913ca88501b8dbcdd9c196
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
VPE apis are actually vlib apis. This moves those that are not tightly
coupled with vapi to vlib_api
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I456a64ce49a0cdeff4a0931c6ea513cb639f683e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
A subinterface that does not have exact match enabled cannot have
an IP address configured on it. When this is validated in the functions
which add an interface IP address for IPv4 and IPv6, a clib_error_t * is
returned but api_errno is not set. The API handler uses the value of
vnet_main.api_errno to set the return value in it's reply. Since it was
not set, the API reports the operation succeeded.
Set vnet_main.api_errno if vnet_sw_interface_supports_addressing() returns
a non-null value when adding/deleting an interface IP address.
Change-Id: I257a30d21788986102a2a719235e714ff16a24e8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Change-Id: I10f4084907ad714aded86e0b7a1a4d1c5fa1f140
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type:improvement
Change-Id: I9f9f16eabf64203db11cd4338948d76ca5e0ef12
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
virtio_if_t is shared data struct between tap, tun and virtio pci.
cxq_vring is virtio pci specific element. It shouldn't be set or
accessed in tap driver.
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I8b34570f61b38d8b9d79d5b0669bda0f89ebc28c
|
|
Type: fix
virtio have three different interfaces (tap, tun and native virtio).
virtio_show() is used by CLI commands to show information about these
interfaces. It uses interface type to print interface specific information.
virtio_show() should use proper type for virtio interfaces (TAP, TUN, VIRTIO).
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I2043dc2cfe2e2f6c7c9348b8494aa4a27cab31f3
|
|
Type: improvement
e.g.:
DBGvpp# sh int 3
Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
loop2 3 down 9000/0/0/0
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie296167ab2b1b9576b46f6d4d9fb9546aef3a0da
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic7d99154def71cd06e8faa64180912e5b844424e
|
|
Set tableID = ~0 for auto selection unused ID
https://jira.fd.io/browse/VPP-1993
Type: improvement
Change-Id: I4eec2cc1d18fc025196cb6ac4c9a4b374388eb56
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: improvement
Change-Id: I8b129b71f91b12ab2d8b05fe3891a7ab8926f072
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I3de4450b95f6fa76705923d983cf93c21b02a635
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I60815b5827b4406228fd6b490f4ac1f874bac974
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
|
|
Type: feature
Change-Id: If0edbb21a0283d66c648a9e190d238c8cfa56353
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Change-Id: I5245fc3f35b7a70833916db2ebf33f7c87398915
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I176f08c74eb58a78f7fbdb48fd4592e6ddf74d34
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I99162d80280e0f45344671b18b1ea96db90d4282
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3652ae275385d9b1eb1b11f418e3a7e5fef2f556
|
|
This adds a new API call to add session namespaces
It now takes a netns and a sock_name.
(1) If no netns is passed, sock_name will be used as
socket path. Defaulting to /run/vpp/app_ns_sockets/${ns_id}
(2) If a netns is passed, the sock_name has to be
abstract (i.e. start with '@'). It will default to
`@vpp/session/${ns_id}` and will be created in the provided
netns.
Type: feature
Change-Id: I90e9a8e5ecca2cabe7c05335663e33c8506dc9e7
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic0fa4f83048a280a7d1b04198c0f903798562d2d
|
|
Type: feature
Change-Id: I91f72f5802db195d1a15424d67c1b6e518168f9f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Currently when a new TAP/TUN device is created from tap_create_if()
via the TUNSETIFF ioctl(), a name is allocated by the kernel (eg.
tap0). If the caller supplied a name this is subsequently set via
netlink, after the device has been created.
Now we request the kernel to create the new device with the caller's
requested name in the first instance, thus avoiding the need to
rename the device, and therefore avoiding a window where the device
exists with a different name.
This can be beneficial, for example, when writing systemd-udevd link
files [1]. Having the TAP/TUN devices created with the requested name
ensures they can be correctly matched by the OriginalName option.
Writing link files might be necessary, for example, to avoid VPP and
systemd-udevd racing to set the MAC address on a newly created TAP
interface. systemd-udevd can be configured to not manipulate the MAC
addresses of matched interfaces.
These changes also resolve an issue where the created device would not
be renamed if the caller requested it be moved to a different network
namespace, since vnet_netlink_set_link_name() was not called in that
case.
[1] https://www.freedesktop.org/software/systemd/man/systemd.link.html
Signed-off-by: Duncan Eastoe <duncan@graphiant.com>
Change-Id: I3d657632856d03979d6b914225c3c841c379e0a1
|