aboutsummaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2019-09-23api: add missing format_vl_api_ip[46]_address_with_prefix_tJakub Grajciar1-0/+12
Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Iad7067962b1dd8d3a1335f07e89a62f901e82dff
2019-09-23fib: do not dump no-longer valid adjacenciesBenoît Ganne4-3/+23
In some cases, we can refer to no-longer adjacencies (eg. in traces). Do not dump them in this case as they are probably incorrect (memory can be reused). Type: fix Change-Id: Ib653ba066bb6595ec6ec37d313a3124bce0eeed3 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-23ip: fix memory leak in ip_dump handlerMatthew Smith1-0/+2
Type: fix A vector allocated by vl_api_ip_dump_t_handler() was not being freed. Change-Id: I13425b8087e60df60c6aaa1230aa7e6d60b101a8 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-20session: fix msg freeing on errorNathan Skrzypczak2-13/+7
Type: fix Change-Id: I0807f84737d5e98e69e9ed27a1de6813b2ddd138 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-09-20tcp: refactor congestion event handlingFlorin Coras1-40/+36
Type: refactor Minor cleanup to congestion event handling. Change-Id: I7179ff9e21c1853382ba814652c9024f3e5b8a37 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-20misc: classifier-based packet trace filterDave Barach8-8/+450
See .../src/vnet/classify/trace_classify.h for the business end of the scheme. It would be best to hash pkts, prefetch buckets, and do the primary table lookups two at a time. The inline as given works, but perf tuning will be required. "At least it works..." Add "classify filter" debug cli, for example: classify filter mask l3 ip4 src dst \ match l3 ip4 dst 192.168.2.10 src 192.168.1.10 Add "pcap rx | tx trace ... filter" to use the current classify filter chain Patch includes sphinx documentation and doxygen tags. Next step: device-driver integration Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I05b1358a769f61e6d32470e0c87058f640486b26
2019-09-20classify: remove includes from classifier header fileDamjan Marion7-10/+7
Type: refactor Change-Id: I6f0af1c3078edce1c1b29a8b99c4a232d7084d33 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-09-20interface: fix pcap drop trace in case of vlanBenoît Ganne1-1/+12
Type: fix Change-Id: If3c4e5c376b51a26143d8922dcacfbda534163bd Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-09-19session: builtin app rx notifications regardless of stateFlorin Coras1-3/+5
Type: feature Provide rx notifications to builtin apps even after disconnect. Consequently tcp connections that are past FIN_WAIT_1 can still receive rx notifications. This is not currently supported for external applications. Change-Id: I529da7f7120b0e7c62c5026ac71f86d6b5196cf4 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-19cop: API cleanupJakub Grajciar1-9/+10
Use consistent API types. Type: fix Change-Id: I6ac453c88628a4dbb08b03c408df09b91b1ea5ca Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-19api: split vl_api_prefix into twoOle Troan5-5/+27
One type for address with prefix and one type for prefix. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Icfec51d9b7d5cde1d69fbecdd97498688ab7b295 Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Klement Sekera <ksekera@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-18tcp: compute snd time for rate sampleFlorin Coras2-6/+11
Type: feature Change-Id: I6bd675dc28dbc34293e895911efe986844c0564f Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-17session: limit pacer bucket sizeFlorin Coras2-2/+4
Type: feature Change-Id: I3ca27b09670716eba463d7b16771f765a1bd6dcd Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-16tcp: use rate sample rtt in recovery if possibleFlorin Coras1-6/+14
If in recovery and rate samples are taken for burts that have not been retransmitted, use the rtt estimate. Type: feature Change-Id: I95028f492008457c959157aa4ee4c3435fa9c3f0 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-16http_static: add dynamic GET / POST method hooksDave Barach1-3/+40
Add .json output to format_vnet_sw_interface_cntrs(...) Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ied036ebfaaafbf1dfc2a4e396c00f09f40659400
2019-09-16api: autogenerate api trace print/endianOle Troan9-10/+156
In addition to the external vppapitrace tool, VPP itself supports dumping of API trace files. In two formats, "custom-dump" and "dump". "dump" gives a human friendly list, and "custom-dump" is meant to give a list of commands that can be fed to VAT. This patch only deals with "dump". Prior to this fix, auto-generation was only done for the basic types. This fix adds support for any type, including lists, and supports pretty-printing of enums, strings, IP addresses, MAC addresses and so on. Usage: api trace dump <api-trace-file> For example Change-Id: I4e485680e6dcfce7489299ae6cf31d835071ac40 ---------- trace 48 ----------- vl_api_sw_interface_set_flags_t: _vl_msg_id: 75 client_index: 0 context: 10 sw_if_index: 1 flags: IF_STATUS_API_FLAG_ADMIN_UP ---------- trace 49 ----------- vl_api_sw_interface_add_del_address_t: _vl_msg_id: 88 client_index: 0 context: 11 sw_if_index: 1 is_add: 1 del_all: 0 prefix: 172.16.1.1/24 ---------- trace 51 ----------- vl_api_cli_inband_t: _vl_msg_id: 819 client_index: 0 context: 13 cmd: packet-generator capture pg0 pcap /tmp/vpp-unittest-TestMAP-YhcmDX/pg0_out.pcap disable ---------- trace 58 ----------- vl_api_ip_neighbor_add_del_t: _vl_msg_id: 199 client_index: 0 context: 20 is_add: 1 neighbor: sw_if_index: 2 flags: IP_API_NEIGHBOR_FLAG_NONE mac_address: 0202.0000.ff02 ip_address: fd01:2::2 Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I5556d06008de2762e7c2d35a8b0963ae670b3db1 Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com> Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-13session: add session enable option in config fileNathan Skrzypczak1-0/+2
Type: feature Change-Id: I8f02873e75c6e890f6749806d4f02547f951c8ca Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-09-12tcp: cleanup scoreboard after recoveryFlorin Coras1-0/+7
Type: fix When recovering from congestion, remove last hole in scoreboard if it covers all bytes sent above snd_congestion. Change-Id: I752accd4590cd9bf553c35a1bb40a38c308c04f5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-12devices: af_packet API cleanupJakub Grajciar3-24/+29
Use consistent API types. - fix af_packet_dump dumping deleted interface Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ie8d138e30c8c51a2306bb2ad9ac0b7a49d5412bf Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-11ip: apply dual loop unrolling in ip4_inputLijian.Zhang1-0/+68
Too many prefetches within loop unrollings induce bottleneck and performance degradation on some CPUs which have less cache line fill buffers, e.g, Arm Cortex-A72. Apply dual loop unrolling and tune prefetches manually to resolve hot-spot with prefetch instructions. It saves about 11.5% cycles with ip4_input node on Cortex-A72 CPUs. Type: feature Change-Id: I1ac9eb21061a804af2a414b420217fbcda3689c9 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-09-11ip: apply dual loop unrolling in ip4_rewriteLijian.Zhang1-0/+131
Too many prefetches within loop unrollings induce bottleneck and performance degradation on some CPUs which have less cache line fill buffers, e.g, Arm Cortex-A72. Apply dual loop unrolling and tune prefetches manually to remove hot-spot with prefetch instructions, to get throughput improvement. It brings about 7% throughput improvement and saves 28% clocks with ip4_rewrite nodes on Cortex-A72 CPUs. Type: feature Change-Id: I0d35ef19faccbd7a5a4647f50bc369bfcb01a20d Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
2019-09-11bonding: API cleanupJakub Grajciar2-31/+54
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Idbba4ab6a412b75338e3149e51476693f0862f16 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-11tcp: handle sack renegingFlorin Coras3-92/+126
Type: feature Change-Id: I201155b1b92cf7e57310af726879dab039090582 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-10tcp: enable gso in tcp hoststackSimon Zhang6-3/+89
Type: feature Change-Id: If68d07fbe8c6f7fffd2f93c7e854367082927e4f Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2019-09-10misc: clean up "pcap [rx|tx] trace" debug CLIDave Barach2-168/+161
Separate debug CLI arg parsing from the underlying action function. Fixes a number of subtle ordering dependencies, and will allow us to add a binary API to control the feature at some point in the future. Type: refactor Ticket: VPP-1770 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id0dbeda06dad20e756c941c691e2088ce3c50ec7
2019-09-10session: fix session filter rangeFlorin Coras1-1/+1
Type:fix Change-Id: I173f45bf3d90e6979675b2ac812a969539f02147 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-10tcp: validate connections in outputFlorin Coras1-9/+46
Type: feature This shouldn't happen unless connections are removed after buffers were enqueued to tcp-output and before tcp-output runs. For instance, packet is enqueued to tcp output and cleanup is called for connection. Change-Id: Ib7dd82ffa6cfb21ff5068aba010e0a3497eeea13 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-07ip: fix udp/tcp checksum corner casesDave Barach2-5/+31
When checksumming chained buffers with odd lengths: insert a NULL byte, or the calculation fails. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: John Lo <loj@cisco.com> Change-Id: I380f7c42897bdb28c8c29aa1c4cdaaa849cc9ecc
2019-09-06bonding: add weight support for active-backup modeSteven Luong4-82/+258
Not all interfaces have the same characteristics within the bonding group. For active-backup mode, we should do our best to select the slave that performs the best as the primary slave. We already did that by preferring the slave that is local numa. Sometimes, this is not enough. For example, when all are local numas, the selection is arbitrary. Some slave interfaces may have higher speed or better qos than the others. But this is hard to infer. One rule does not fit all. So we let the operator to optionally specify the weight for each slave interface. Our primary slave selection rule is now 1. biggest weight 2. is local numa 3. current primary slave (to avoid churn) 4. lowest sw_if_index (for deterministic behavior) This selection rule only applies to active-backup mode which only one slave is used for forwarding traffic until it becomes unreachable. At that time, the next "best" slave candidate is automatically promoted. The slaves are sorted according to the preference rule when they are up. So there is no need to find the next best candidate when the primary slave goes down. Another good thing about this rule is when the down slave comes back up, it is selected as the primary slave again unless there is indeed a "better" slave than this down slave that were added during that period. To set the weight for the slave interface, do this after the interface is enslaved set interface bond <interface-name> weight <value> Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I59ced6d20ce1dec532e667dbe1afd1b4243e04f9
2019-09-06tap: revert clean-up when linux will delete the tap interfaceMohsin Kazmi2-43/+0
Type: fix Ticket: VPP-1766 revert e4ac48e792f4eebfce296cfde844ee73b1abd62f Change-Id: I03feea4008a47859d570ad8d1d08ff3f30d139ef Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> (cherry picked from commit 623a1b7053424b539a51faf866ab839d3da3f45b)
2019-09-04bfd: API cleanupJakub Grajciar2-84/+66
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I4b91ebe8aadbec8b95716ed1cde4b0a13eee3a3f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-09-04stats: add /if/<n>/<n>/state for lacp interface stateSteven Luong2-2/+31
Add /if/lacp/<bond-sw_if_index>/<slave-sw_if_index>/state <bond-sw_if_index> is a vector of the bond sw_if_index <slave-sw_if_index> is a vector of the slave sw_if_index Content is the integer value of the lacp actor state. The state is actually a bitfield as described in the lacp protocol spec. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ic6eca8ce2a1acd2d858e4e50b7eac1d000ea08e5 Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-04session: improve cliFlorin Coras6-145/+345
Type: feature Allow session cli filtering based on thread index, transport protocol, session state and range of session pool indices. For instance show session thread 1 proto tcp state ready range 0 20 verbose Shows the session ids for the first 20 tcp sessions in thread 1 that are in ready state. To avoid excessive output that could reasult in the worker barrier being held by the main thread for long periods of time, the session cli will only output: - session ids (verbose == 1) for a maximum of 50 sessions / worker - verbose > 1 details for a maximum of 10 sessions Change-Id: I2cfb351b548e2e0a1d5b4345810be613e2917d17 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-04tcp: cc algos handle cwnd on congestion signalFlorin Coras3-12/+11
Type: refactor Change-Id: I15b10a22d0d0b83075a0eef5ef8c09cf76989866 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-04ethernet: move dmac filtering to inline functionMatthew Smith1-56/+63
In eth_input_process_frame(), destination MAC addresses are compared to the interface hardware address in a loop. Move this to a separate inline function to facilitate making changes to the filtering logic more cleanly. Type: refactor Change-Id: I0978f01667e78af5214dbbc9ba223f5b84ce6b7e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-04session: avoid bihash list for session tablesFlorin Coras1-12/+38
Type: fix Change-Id: I1dbc822061f43fcc25dfa5d1728f5c7575139f45 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-03ethernet: fix dmac check avx2 loop conditionMatthew Smith1-1/+1
In eth_input_process_frame(), a loop which checks the destination MAC address of received packets had a different condition for avx2 than it did for the non-avx2 version of the loop. It could result in one unnecessary execution of the loop body after all packets had been processed. Type: fix Fixes: 8d6f34e2b1cbfde5702e88686631527d5e1e10a0 Change-Id: Ib673f45917a0dea461987fdc8f0ca318b749fb1a Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-09-03api: enforce vla is last and fixed string typeOle Troan4-25/+21
Enforce that variable length fields are the last element of API messages. Add a 'fixed' version of string type, since dealing with multiple variable length strings turned out too painful for the C language bindings. The string type is now: { string name[64]; // NUL terminated C-string. Essentially decays to u8 name[64] string name[]; // Variable length string with embedded len field (vl_api_string_t) }; The latter notation could be made available to other types as well. e.g. { vl_api_address_t addresses[]; } instead of { u32 n_addr; vl_api_address_t addresses[n_addr]; }; Type: fix Change-Id: I18fa17ef47227633752ab50453e8d20a652a9f9b Signed-off-by: Ole Troan <ot@cisco.com>
2019-09-03tap: fix tap interface not working on Arm issueLijian.Zhang1-1/+6
The VPP code tries to set all userspace memory in the table via IOCTL to VHOST_SET_MEM_TABLE. But on aarch64, the userspace address range is larger (48 bits) than that on x86 (47 bits). Below is an segment from /proc/[vpp]/maps. fffb41200000-fffb43a00000 rw-s 00000000 00:0e 532232 /anon_hugepage (deleted) Instead of setting all userspace memory space to vhost-net, will only set the address space reserved by pmalloc module during initialization. Type: fix Change-Id: I91cb35e990869b42094cf2cd0512593733d33677 Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com> Reviewed-by: Steve Capper <Steve.Capper@arm.com>
2019-09-03tcp: send rwnd update only if wnd is large enoughFlorin Coras3-7/+15
Type: feature Change-Id: I3e97e05a31806afb6b2e84ecf05fb96d285db92e Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-09-02tap: interface rx counter not increment correctSteven Luong1-1/+1
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Using hw_if_index may work as long as there is no subinterface created to cause hw_if_index and sw_if_index to differ. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I6db042186eeeacf32250f7ef261af8cd6f5ce56e
2019-09-02ipsec ip tcp l2: multiarch nodes cannot be declared as staticDamjan Marion8-15/+15
Credits to ray.kinsella@intel.com who spotted the issue and identified root cause. Type: fix Change-Id: I4afe74c47769484309f6aebca2de56ad32c8041f Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-08-31tcp: fix rx min/max fifo size parsingFlorin Coras1-13/+14
Type: fix Change-Id: Iff4a13da654dbdf7f08bb6d0743b466a1e6be01b Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30session: move svm_fifo_clear_deq_ntf to before calling the app callbackVladimir Kropylev1-2/+2
Type: fix in case the app requests another dequeue notification, it should not be cleared Change-Id: I7e94e8e30ef098f87f5e7f4880af276970ee5b37 Signed-off-by: Vladimir Kropylev <vladimir.kropylev@enea.com>
2019-08-30devices: fix issue of per_interface_next_indexMichael Yu1-3/+4
Per interface, next hop graph node can be customized with vnet_hw_interface_rx_redirect_to_node function, but it doesn't work well for af-packet type interface. In current implementation, with function af_packet_set_interface_next_node invoked next hop graph node index can be set to apif->per_interface_next_index, but it's not set to next0 properly for packet processing in af_packet_device_input_fn. Type: fix Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com> Change-Id: I8e132ddd1c3c01b6f476de78546d4a9389b3ff87 Signed-off-by: Michael Yu <michael.a.yu@nokia-sbell.com>
2019-08-30tcp: force zero window on full rx fifoFlorin Coras1-1/+4
Type: feature Change-Id: I7c5684a9f88e56fd62d83a59c14c4e4a6f096b89 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30tcp: improve mss computationFlorin Coras3-43/+48
Type: fix Use different mss for v4 and v6 packets. Change-Id: Ifcd322c1fd74f749a42bae671dd6cfed8c32b150 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30tcp: track zero rwnd errorsFlorin Coras2-1/+9
Type: feature Distinguish between rcv window errors and errors after we advertised a zero rcv window, i.e., potential window probes. Change-Id: I6cb453c7aaae456c0a05a8328cfaa55eaca10bf7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-08-30session : make sure session layer is enabled when cli operate the sessions.Guanghua Zhang1-0/+4
Type: fix show session rules tcp vpp/src/vnet/session/application_namespace.c:34 (app_namespace_get) assertion `! pool_is_free (app_namespace_pool, _e)' fails Thread 1 "vpp_main" received signal SIGABRT, Aborted. Signed-off-by: Guanghua Zhang <ghzhang@fiberhome.com> Change-Id: I3430339a598a92d0a38826471adeb4547b0b7df4
2019-08-29ip: remove unused function parameterSimon Zhang6-17/+12
Type: refactor Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com> Change-Id: I8674ff5f6f6336b256b7df8187afbb36ddef71fb