Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
Change-Id: I5739869490155b0b9674b4faf61882d97e66a4ed
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
vnet_crypto_is_set_handler() was checking if op handler is set by
using alg instead of op id.
This fix changes the check to use op ids from crypto_main's alg_data
for provided alg.
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: I5f0f00a889ddada44d9912af175ebad66677037a
|
|
one cache line
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I54128ba62f8dcc87c1845b33ed3637112d42a891
|
|
If classify pcap filter was never configured, typing the delete
command causes a crash. The reason is
cm->classify_table_index_by_sw_if_index not yet allocated.
The fix is to add a check before we access the vector.
Type: fix
Fixes: gerrit 28475
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ia33bd91fa82d8ffc4490d4069155980a6e233268
|
|
This change introduces flow concept to endpoint-dependent NAT. Instead
of having a session and a plethora of special cases in code for e.g.
hairpinning, twice-nat and others, figure all this out and store it in
flow logic. Every flow has a match and a rewrite part. This unifies all
the NAT packet processing cases into one - match a flow and rewrite the
packet based on that flow. It also provides a cure for hairpinning
dilemma where one part of the flow is on one worker and another on
a different one. These cases are also sped up by not requiring
destination adress lookup every single time to be able to rewrite source
nat as this is now part of flow rewrite logic.
Type: improvement
Change-Id: Ib60c992e16792ea4d4129bc10202ebb99a73b5be
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I89dc3815eabfee135cd5b3c910dea5e2e2ef1333
|
|
Don't assume that half-open connections pending removal are always
successful.
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I955077a4ed2389b9ee38d97e27a7c7761c860a4a
|
|
Type: docs
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3dfde4520a48c945ca9707accabbe1735c1a8799
|
|
Type: fix
If a tunnel's source is not local then post encap VPP will attempt to
receive (via ip4-local) that packet, things go wrong from there.
The fix is when stacking the encap forwarding don't accept a receive
DPO. This approach is taken, rather than rejecting bad tunnels, because
the 'local-ness' of the tunnel's source can change and we can't reject
tunnels that were once correctly configured but are no longer.
the user will quickly discover their mistake as traffic won't pass.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I46198422e321606e8baba003112e978a526b4c2f
|
|
Minor fixes for Intel AVX-512 alignment, and cache update.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I9f9bebb4ecb3265ffc765affd1ed94d0ba979066
|
|
Allocate and attach a new pair of private fifos in the right private
slice when a session is cloned. This ensures that private fifos are not
shared between workers.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib700d18104d2ca79aa8a07434cdcdcab0bef13a5
|
|
want_l2_macs_events
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I6de6dae7da4ec1001e2811975a9b67acfc1a148c
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I056717261553f6449f5fcd3611b6ae3895a00ba6
|
|
VPP only supports a poor man's approach for interrupt notification to the
driver. It uses a simple binary flag for "interrupt needed" or "interrupt
not needed". Most drivers support more sophisticated event index already.
This feature is to add the long due missing feature and make it configurable,
off by default.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I68dab7dd07045cafb49af97b7f70db9b8131ae03
|
|
Remove the deprecated tls apis.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia1e12bd813671146f0aca22e83d04c23ac13e595
|
|
Type: feature
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ief1755131297afcaa14fe74fd8dd28c71a92fbe6
|
|
Type: fix
it's been 2 releases since it was marked deprecated.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eba7ed607826ed0d00e7d2d8f9b27d09e8e9a6e
|
|
Type: fix
I should have done this wehn i marked the request as deprecated. The
reply also needs to be marked deprecated so the API compliance script
can remove it along with the request.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I8391257944b6cff7b32a01a479dd1dcab30cd33b
|
|
Type: feature
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Change-Id: I57ed6699050445d9c9aec98eff3aab56735aca54
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
Type: fix
Fixes: 587f9130424fd451e4ba823240d02f655fb197d1
Change-Id: Ia1739fad6a36fa658aece157d7adea8bbaa751d2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I84388bd8b68e8c48a4f44d7ecf7aadec2408b717
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Signed-off-by: yedonggang <yedg@wangsu.com>
Change-Id: Icc3681b591e6deb93c3ff1fda5f9471fa3c96cc6
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7b2fd896dfa6df46916f46327975b95561809f00
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1658a9c19d8eae4c9a42c0a111d4ad343b8eb8a4
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic373cd2c11272da539eb4b0db27227f36f2f9688
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I63a44e11322f6fe27255820524e022f6d710b083
|
|
Add descriptions to clib_file_t template structures so that
sockets can be identified via the 'show unix file' cli command.
Type: fix
Change-Id: Ibf82d55aa6c7b1126bd252b76d0dc8b7076f5046
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
shallow was the default, but probably by accident as it depended on
module load order.
full assembly is the v4 behaviour.
using proper types allows gdb to print enum names.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If157c5b83614c7adbd7a15a8227a68f8caf4e92c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Current vhost multi-queues support has a hard limit of 8 queue pairs
due to static vring array. This limit was raised in qemu. VPP should
support more than 8 queue pairs also.
Change static vring allocation to dynamic. When the interface is
created, we allocate 8 queue pairs to begin with. We also keep track
of how many queue pairs that the interface actually uses.
We reply VHOST_USER_GET_QUEUE_NUM with 128 as our maximum number of
support queue pair. When qemu starts initializing queue pair greater
than 8, we expand the vrings as needed on demand.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I4a02d987d52d1bbe601b00e71f650fe6ebfcc0d7
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id8e77e8b2623be719fd43a95e181eaa5b7df2b6e
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I17003925be06d1051f18f1c24ff081790a610c23
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I518e096fe13847759806ff62009e73fd8f7451b7
|
|
- Refactor make test code to be co-located with
the vpp feature source code.
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I3ef69bc915d2217357a9e2b1afa1cfd6c363faa0
|
|
On the one hand, make sure options are terminated with NOPs to avoid
issues with clients that can't parse options that don't end on an u32
boundary. On the other, make sure the padding is rfc compliant. If
options end with EOL the padding should be zeros. The current change
does not use EOL so the padding is NOPs.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I608056707ef9658ca90b9c095e84a0689d8000d7
|
|
The bio interacts directly with the session so it avoids using an
intermediary mem bio and, implicitly, higher memory consumption and an
extra memcpy.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifb675cfd12df86396a7a738a6cd4d0882c69ad2f
|
|
Type: fix
This change makes esp_move_icv() update pd->current_length if the first
buffer's length is updated.
In case that ICV is split over two buffers, esp_move_icv() copies ICV
to last buffer, it also updates the before_last buffer's current_length.
However, in esp_decrypt_post_crypto(), pd->current_lenght is used to update
first buffer lenght, but pd is not updated in esp_move_icv()
and the total pkt lenght ends up incorrect.
This only happens in tunnel mode when ICV is split between 1st and 2nd buffers.
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: Ic39d87454ec0d022c050775acb64c5c25ccf7f13
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: I64527e9f5259e9984dc1e90023b367ee0fd8deeb
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I0529eb51b5a6bc2a5f1a49ee9d3320908ad1dba9
|
|
Add safeguards when tracing packets to avoid cases where clear trace
was issue while buffers were held in reassembly.
Type: fix
Change-Id: I1bdd1e629e8bc08ce63913fd3c4b2327e47dec04
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Add lookup/get/set API calls to manage both PCAP and Trace
filtering Classifier tables.
The "lookup" call may be used to identify a Classifier table
within a chain of tables taht matches a particular mask vector.
For efficiency, this call should be used to determine to which
table a match vector should be added.
The "get" calls return the first table within a chain (either
a PCAP or the Trace) set of tables. The "set" call may be
used to add a new table to one such chain. If the "sort_masks"
flag is set, the tables within the chain are ordered such that
the most-specific mask is first, and the least-specific mask
is last. A call that "sets" a chain to ~0 will delete and free
all the tables with a chain.
The PCAP filters are per-interface, with "local0", (that is,
sw_if_index == 0) holding the system-wide PCAP filter.
The Classifier used a reference-counted "set" for each PCAP
or trace filter that it stored. The ref counts were not used,
and the vector of tables was only used temporarily to establish
a sorted order for tables based on masks. None of that
complexity was actually warranted, and where it was used,
the same could be achieved more simply.
Type: refactor
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: Icc56116cca91b91c631ca0628e814fb53f3677d2
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idb62154191e85651263be9ae116dd87b93e3a140
|
|
Type: refactor
Change-Id: I077110e1a422722e20aa546a6f3224c06ab0cde5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: Ie67dc579e88132ddb1ee4a34cb69f96920101772
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- reduces number of instructions generated 4 times compared to old code
- adds pool_foreach2 which is more friendly to clang-format
Type: improvement
Change-Id: I51e9c7fb09655c60d883987dadf5b2666c12b3f7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I269214e3eae72e837f25ee61d714556d976d410f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: improvement
ip4_rewrite_inline_with_gso() did vlib_prefetch_buffer_header() for all nodes.
However it is not necessary for ip-rewrite, it is only needed by ip-midchain.
This patch makes ip4-rewrite prefetches less buffers to save cycles.
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: Ib82dcb0eda4a2d1d7b8d664f2224d49b72aef50f
|
|
Type: fix
Change-Id: I7ca955882c0e263a9ace4b14021e51488564e411
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: style
Change-Id: Iee9463735c4d114a97e6167d717d1911c4477e70
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Ic4ef53f49102d7b5061f1b6d3a1d0c8427b9d1f7
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Idf17c3c02fb77fcadf69a9164abd4da35289aaed
|