Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Iacfbaaa91ea8bd92790dec9fce567063bdbc5d64
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: Ib92794205027d3242c6f0c8962fe02ac38c7129b
Signed-off-by: Krishanpal singh <krish.singh03@gmail.com>
|
|
- GRE tunnels with the same src,dst addresses are not the same tunnel
- Two data-plane improvements:
- the cached key was never updated and so useless
- no need to dereference the tunnel's HW interface to get the sw_if_index
Change-Id: I2f2ea6e08c759a810b753cec22c497e921a2ca01
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This allows arm platforms to also take advantage of crc32 hardware
acceleration.
* add a wrapper for crc32_u64. It's the only one really used. Using it
instead of a call to clib_crc32c() eases building symmetrical hash
functions.
* replace #ifdef on SSE4 by a test on clib_crc32c_uses_intrinsics.
Note: keep the test on i386
* fix typo in lb test log
Change-Id: I03a0897b70f6c1717e6901d93cf0fe024d5facb5
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Send packets to ip4/6_punt/drop nodes instead of error-drop/punt nodes
dbarach: clean up an annoying checkstyle issue: indent 2.2.10
(OpenSUSE version) and indent 2.2.11 (Ubuntu / CentOS versions) had an
artistic disagreement about ip_frag.c.
Change-Id: I660bee28a064af9c6c70371363081e941d1c3a94
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I465282e513b6a0482e96dd02fc7e0e4ed3e3731a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d
Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>
|
|
Change-Id: I23081ea25a8d40d8ebe1fcb6efe4143e9c5a0fc6
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I7196ad8bf6afaf356674789c05e23ac000bc038e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I39d21d15677f57e10b69b8842f2cbca277abddf0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I655382f7f74181dd7c795a2b22f151f76b50e793
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The "test-all" target is still never called as part of any continuous
test (as it probably should) but at least it can now be expected to
succeed.
VXLAN-GPE:
* decapsulate Ethernet to "l2-input" instead of "ethernet-input"
otherwise the inner mac address get checked against the interface one
(external) and packet gets dropped (mac mismatch)
* set packet input sw_if_index to unicast vxlan tunnel for learning
TEST:
* VXLAN:
* reduce the number of share tunnels:
=> reduce test duration by half
=> no functional change
* VXLAN-GPE:
* fix test TearDown() cli: command is "show vxlan-gpe" only
* remove vxlan-gpe specific tests as the were a duplicated of the
BridgeDomain one and already inherited.
* disable test_mcast_rcv() and test_mcast_flood() tests
* P2PEthernetAPI:
* remove test: "create 100k of p2p subifs"
there already is a "create 1k p2p subifs" so this one is a load test
and not a unit test.
See: lists.fd.io/pipermail/vpp-dev/2017-November/007280.html
Change-Id: Icafb83769eb560cbdeb3dc6d1f1d3c23c0901cd9
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I497305d9a4fd556ed8b4a7ceb3654df94ff98f56
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I497e9f6489dd35219bcf2b51ac992467aac4c8eb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I64e8a76a17057ae69de72a5a80c0a194cd0c21cb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ifa37767eb2c3cfc343f54691e6042473a6adf474
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I3255cd1be4ae4ec8d09574183c96f59028374a5e
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ifabb8d22d20bc1031664d5f004e74cd363759ab6
Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
|
|
Change-Id: Icb93ab80c5a6432d7b2b698a47e8b612c6f06fbd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia7cb4dc18710d15352629d78d9e0c34fb65762f3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I46b4aeb6ec9ab6ee462f9c5074b5778d94bf8dc3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
exist in configuration
Change-Id: I01a69c4eef2c6224a24907b8fed12dcb1b642307
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
- compute session type out of transport and network protos
- make session, session lookup and session queue code network protocol
agnostic
This does not update the session layer to support non-ip network layer
protocols
Change-Id: Ifc2f92845e158b649d59462eb7d51c12af536691
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id10f10889c3036a6db21c999c1e6c54fc1770213
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ibac5a4588e66f6d3ad42dd2583e1e84b7d2314c4
Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
|
|
Change-Id: I565277eafbce3d4f59a7f0d497fca1c4fed3cfc8
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: I17f95775756b8fd5ee390432f6d8041abbd9f974
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1bbd3f6ece255edfd4ebf268ac60f79dce1d10e7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
* app_index has to be valid
* vnet_session needs to be enabled before binding
Change-Id: I410a25153e650d8bc332131a81bf46a0175566d4
Signed-off-by: Andreas Schultz <aschultz@warp10.net>
|
|
On the first session server, the first payload packet gets queued
but the Rx callback will only be invoked when the second packet
is received.
By initializing enqueue_epoch in the session, we can make sure that
the RX callback will be invoked for the first packet as well.
Change-Id: I60e2cf8d4d2ca71d461ca003d459c8e6e6956a4d
Signed-off-by: Andreas Schultz <aschultz@warp10.net>
|
|
enable/disable option
Change-Id: I47dd6f9637f0214971e3191852d84aa92d64b8c0
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
as decsribed in section 2.2
ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10
with BIFT encoding from:
https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00
changes:
1 - introduce the new BIFT lookup table. BIER tables that have an associated
MPLS label are added to the MPLS-FIB. Those that don't are added to the
BIER table
2 - BIER routes that have no associated output MPLS label will add a BIFT label.
3 - The BIER FMask has a path-list as a member to resolve via any possible path.
Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I45a166b5780675d2bc6fe90595f413725704eaa8
Signed-off-by: khemendra kumar <khemendra.kumar13@gmail.com>
|
|
Change-Id: I35e166feeb0ac1e0e570efe07cb5f4cbeb5b8670
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- change interface naming scheme
- rework netlink code
- add option to set link address, namespace
Change-Id: Icf667babb3077a07617b0b87c45c957e345cb4d1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This fixes a crash if the first buffer in buffer chain is not traced,
but some other buffer (mid-chain) is.
Change-Id: I2c9f529ae0bc3263d20981e0cb83ce24ed292bd8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I32ec3ff341e70ceaa6203df5a9e7c3ffdae20a06
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ie750c9fe06c067226b90bdcc3ea423b74d16562d
Signed-off-by: satish.karunanithi <satish.fdio@gmail.com>
|
|
Change-Id: Ibe2041d83e9b5be16801dc316bd472ae4f6e8c31
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0cf48b69042996afcb8b192f5fd98165058d9e1d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I63d720378b92813993525f80fee90fc79df27fba
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ic8b193e93ce18ca82b294816aa7ee0ef31d64bc2
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Move elog_sample.c to src/examples/vlib
Change-Id: I7d32c83c424b9ca4a057372c7fc6a6e2b7dab034
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ica1be5c75c83ac64c7063bfeff1f4d00702a00e1
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
This reverts commit 84517cfd1508f6da24937f310f7fffe752f22584.
Change-Id: Ic7eeffa2ed4607d3d653f34b93c20c833c789ee1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Changes made in ethernet_input to set l2_hdr_offset,l3_hdr_offset, and
their corresponding flags.
Please note that ethernet_input, as a critical DP, incurs a few extra cpu
cycles due to this patch, but for a worthy cause.
Change-Id: Ie9ae352ea62959d2779ebcca98a1898e3d9e1d6f
Signed-off-by: Steven <sluong@cisco.com>
|
|
virtio backend stays in vnet/devices/virtio
Change-Id: Idbf04f1c645a809ed408670ba330662859fe9309
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
As tapcli code is going to be deprecated and replaced with tap v2 code,
change the interface naming so the new code can use form tap-X.
Change-Id: I2684a880c037caee677927214752c00cf97f63f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
fd is not close when IOCTL encounters an error which causes resource
leak. The fix is to initialize fd to -1. At return, close fd if
it has a valid value.
Change-Id: I53c4f5c71ca0f556fb6586f5849e7cb622632d8f
Signed-off-by: Steven <sluong@cisco.com>
|