Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I518387ab479bee4778d45a33c95f7b0f72aa1b72
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
L2 Emulation is a feautre that is applied to L2 ports to 'extract'
IP packets from the L2 path and inject them into the L3 path (i.e.
into the appropriate ip[4|6]_input node).
L3 routes in the table_id for that interface should then be configured
as DVR routes, therefore the forwarded packet has the L2 header
preserved and togehter the L3 routed system behaves like an L2 bridge.
Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
CLI parsing code (unformat_fib_route_path) does not
recognise 'resolve-via-connected'.
However it understands 'resolve-via-attached'.
Change-Id: I57e5eb75199cb8ae72c0fc8642a41f042b022201
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: Ibb6f450783d0ab64bd943c19f12d0954b0a94b24
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: I9341f1554d804dfeeecef656e59e8598704863dc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I5ecd43330b3329b072e6da62a4eed1641eb17f8f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0f8d2d9be78d4d936ed61538aee1b7207871347b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I61e6019ab34f52c82bf3f1e5327501a613f58bd9
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ic1ab32c5df3f7a613fe0dcd6bfc15037fa2a008b
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I87e3de556910851d16af343bfcbede49500843ff
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Iacfbaaa91ea8bd92790dec9fce567063bdbc5d64
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: Ib92794205027d3242c6f0c8962fe02ac38c7129b
Signed-off-by: Krishanpal singh <krish.singh03@gmail.com>
|
|
- GRE tunnels with the same src,dst addresses are not the same tunnel
- Two data-plane improvements:
- the cached key was never updated and so useless
- no need to dereference the tunnel's HW interface to get the sw_if_index
Change-Id: I2f2ea6e08c759a810b753cec22c497e921a2ca01
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This allows arm platforms to also take advantage of crc32 hardware
acceleration.
* add a wrapper for crc32_u64. It's the only one really used. Using it
instead of a call to clib_crc32c() eases building symmetrical hash
functions.
* replace #ifdef on SSE4 by a test on clib_crc32c_uses_intrinsics.
Note: keep the test on i386
* fix typo in lb test log
Change-Id: I03a0897b70f6c1717e6901d93cf0fe024d5facb5
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Send packets to ip4/6_punt/drop nodes instead of error-drop/punt nodes
dbarach: clean up an annoying checkstyle issue: indent 2.2.10
(OpenSUSE version) and indent 2.2.11 (Ubuntu / CentOS versions) had an
artistic disagreement about ip_frag.c.
Change-Id: I660bee28a064af9c6c70371363081e941d1c3a94
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I465282e513b6a0482e96dd02fc7e0e4ed3e3731a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d
Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>
|
|
Change-Id: I23081ea25a8d40d8ebe1fcb6efe4143e9c5a0fc6
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I7196ad8bf6afaf356674789c05e23ac000bc038e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I39d21d15677f57e10b69b8842f2cbca277abddf0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I655382f7f74181dd7c795a2b22f151f76b50e793
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The "test-all" target is still never called as part of any continuous
test (as it probably should) but at least it can now be expected to
succeed.
VXLAN-GPE:
* decapsulate Ethernet to "l2-input" instead of "ethernet-input"
otherwise the inner mac address get checked against the interface one
(external) and packet gets dropped (mac mismatch)
* set packet input sw_if_index to unicast vxlan tunnel for learning
TEST:
* VXLAN:
* reduce the number of share tunnels:
=> reduce test duration by half
=> no functional change
* VXLAN-GPE:
* fix test TearDown() cli: command is "show vxlan-gpe" only
* remove vxlan-gpe specific tests as the were a duplicated of the
BridgeDomain one and already inherited.
* disable test_mcast_rcv() and test_mcast_flood() tests
* P2PEthernetAPI:
* remove test: "create 100k of p2p subifs"
there already is a "create 1k p2p subifs" so this one is a load test
and not a unit test.
See: lists.fd.io/pipermail/vpp-dev/2017-November/007280.html
Change-Id: Icafb83769eb560cbdeb3dc6d1f1d3c23c0901cd9
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I497305d9a4fd556ed8b4a7ceb3654df94ff98f56
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I497e9f6489dd35219bcf2b51ac992467aac4c8eb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I64e8a76a17057ae69de72a5a80c0a194cd0c21cb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ifa37767eb2c3cfc343f54691e6042473a6adf474
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I3255cd1be4ae4ec8d09574183c96f59028374a5e
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ifabb8d22d20bc1031664d5f004e74cd363759ab6
Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
|
|
Change-Id: Icb93ab80c5a6432d7b2b698a47e8b612c6f06fbd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ia7cb4dc18710d15352629d78d9e0c34fb65762f3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I46b4aeb6ec9ab6ee462f9c5074b5778d94bf8dc3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
exist in configuration
Change-Id: I01a69c4eef2c6224a24907b8fed12dcb1b642307
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
- compute session type out of transport and network protos
- make session, session lookup and session queue code network protocol
agnostic
This does not update the session layer to support non-ip network layer
protocols
Change-Id: Ifc2f92845e158b649d59462eb7d51c12af536691
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id10f10889c3036a6db21c999c1e6c54fc1770213
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ibac5a4588e66f6d3ad42dd2583e1e84b7d2314c4
Signed-off-by: sharath reddy <sharathkumarboyanapally@gmail.com>
|
|
Change-Id: I565277eafbce3d4f59a7f0d497fca1c4fed3cfc8
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: I17f95775756b8fd5ee390432f6d8041abbd9f974
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1bbd3f6ece255edfd4ebf268ac60f79dce1d10e7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
* app_index has to be valid
* vnet_session needs to be enabled before binding
Change-Id: I410a25153e650d8bc332131a81bf46a0175566d4
Signed-off-by: Andreas Schultz <aschultz@warp10.net>
|
|
On the first session server, the first payload packet gets queued
but the Rx callback will only be invoked when the second packet
is received.
By initializing enqueue_epoch in the session, we can make sure that
the RX callback will be invoked for the first packet as well.
Change-Id: I60e2cf8d4d2ca71d461ca003d459c8e6e6956a4d
Signed-off-by: Andreas Schultz <aschultz@warp10.net>
|
|
enable/disable option
Change-Id: I47dd6f9637f0214971e3191852d84aa92d64b8c0
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
as decsribed in section 2.2
ihttps://tools.ietf.org/html/draft-ietf-bier-mpls-encapsulation-10
with BIFT encoding from:
https://tools.ietf.org/html/draft-wijnandsxu-bier-non-mpls-bift-encoding-00
changes:
1 - introduce the new BIFT lookup table. BIER tables that have an associated
MPLS label are added to the MPLS-FIB. Those that don't are added to the
BIER table
2 - BIER routes that have no associated output MPLS label will add a BIFT label.
3 - The BIER FMask has a path-list as a member to resolve via any possible path.
Change-Id: I1fd4d9dbd074f0e855c16e9329b81460ebe1efce
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I45a166b5780675d2bc6fe90595f413725704eaa8
Signed-off-by: khemendra kumar <khemendra.kumar13@gmail.com>
|
|
Change-Id: I35e166feeb0ac1e0e570efe07cb5f4cbeb5b8670
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
- change interface naming scheme
- rework netlink code
- add option to set link address, namespace
Change-Id: Icf667babb3077a07617b0b87c45c957e345cb4d1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This fixes a crash if the first buffer in buffer chain is not traced,
but some other buffer (mid-chain) is.
Change-Id: I2c9f529ae0bc3263d20981e0cb83ce24ed292bd8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I32ec3ff341e70ceaa6203df5a9e7c3ffdae20a06
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ie750c9fe06c067226b90bdcc3ea423b74d16562d
Signed-off-by: satish.karunanithi <satish.fdio@gmail.com>
|
|
Change-Id: Ibe2041d83e9b5be16801dc316bd472ae4f6e8c31
Signed-off-by: Neale Ranns <nranns@cisco.com>
|