Age | Commit message (Collapse) | Author | Files | Lines |
|
- cache and reuse tcp options and rcv_wnd for session layer tx bursts
- avoid reading/setting total_length_not_including_first_buffer. It's
part of a buffer's second cache line so it comes at a "cost".
Change-Id: Id18219c2f7e07cf4c63ee74f9cdd9e5918904036
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
ASSERT (ip_csum_with_carry (d, x) == c) will raise assert
if d equals to zero while x not equals to zero.
Change-Id: Ia9ccdbf801ae565eaadd49f04569d13bfc31cba8
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I00a0d7f57dc144d338d5ad45b0a6e3720c32c400
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Thanks to gcc-8 for highlighting this...
Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- sprinkle statics for functions
- move some inlines from header files to corresponding .c files
- replace some always_inlines with statics where inlining is not
performance critical
Change-Id: I371dbf63431ce7e27e4ebbbdd844a9546a1f1849
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Check ARP request packet with bad requester MAC/IP address and
drop these packets. Also removed useless VRRP check in the node.
Change-Id: I2c8a774d291928eb623b3a515f1edf7e338fa760
Signed-off-by: John Lo <loj@cisco.com>
|
|
Because it avoids pool putting/getting the timer, this function is
somewhat faster than stopping and restarting a timer.
Change-Id: Id99ed9d356b0b1f7e12facfe8da193e1cd30b3ec
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Only remaining traces of MAP in the src/vnet is now in buffer.h.
Awaiting a new buffer opaque API (hint, hint).
Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91.
Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This reverts commit a98346f664aae148d26a8e158008b773d73db96f.
Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
It would seem that this avoids using the stack for computing the
subsequent crc32 by storing the 2 x u64 ip4 5-tuple key into two
registers. Probably the cast to the "convenience" data structure "masks"
the fact that the key is 16B. Probably ... :-)
"sh run" on an ip4 tcp sender reports that the number of clocks spent in
tcp_input, where a session lookup is performed, drops ~25% (from ~100
clocks/packet to ~75 clocks/packet)
Change-Id: I50d647115ac72f8407bff7e3b73328ba42f0ddb5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The documentation in the API file says that 0xffff == 'no interface
ID specified' but the code tests against ~(u32)0.
Change-Id: I5cd83d876c3ad4f53a5b01463299d4fcb806ea98
Signed-off-by: Ian Wells <iawells@cisco.com>
|
|
Calculate IP/TCP/UDP checksums in software before adding authentication.
Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I4a7e4f616ed4a4df82be3112ac4702f7e4e2025c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I682a47d6cf9975aca6136188d28ee93eaadf4fe3
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I2f638f1932b4aeddf2408c06d1b8393551675b72
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I28d3c31bdc4255a4ca223d80bcf44709fb39f4ed
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I761aced55b7cef51a9b47048283b2cb9430bcde2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
If the sw-if-index is set to -1, it will send out all interfaces' arp enties. In this case, the sw-if-index is always set to -1. It is not correct.
Change-Id: I21e9ee078c757ac7efa70a2a1f1a7a4eb73d66a1
Signed-off-by: Brant Lin <brant.lin@ericsson.com>
|
|
Change-Id: Idf17a0633a1618b12c22b1119e40c2e9d3192df9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib98cfc93f6c574de5250f251925f7ed4e86f5f6f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
After calling vlib_packet_template_get_packet(), make sure
packet buffer is allocated before using it.
Change-Id: Idb5199f4e2c9596137b2101e502d611f474a6ffe
Signed-off-by: John Lo <loj@cisco.com>
|
|
When computing tcp/udp checksums across large amounts of data -
e.g. when NIC h/w checksum offload is not available - it's worth
providing arch-dependent code; if only to compile the code w/ -O3.
Fix calculation when data is fully unaligned / on an odd byte
boundary.
Add a buffer alignment test vector.
Change-Id: I7644e2276ac6cbc3f575bf61746a6ffedbbb6150
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Jira ticket VPP-1196
Jira ticket VPP-1081
Jira ticket VPP-1078
Jira ticket VPP-1217
Change-Id: Id7e85229cae1017acb0aa4ca63ced334e6dafb8d
Signed-off-by: pcamaril <pcamaril@cisco.com>
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
Signed-off-by: pcamaril <pcamaril@cisco.com>
Signed-off-by: Michal Cmarada <michal.cmarada@pantheon.tech>
|
|
Put error counters under node_index.
/err/<node-name>/<error-name>
E.g:
/err/ip4-lookup/Hash table collisions
/err/ip6-rewrite/Buffer allocation error
Error names are not globally unique, and this allows
for walking all errors for a particular node.
Put interface counters under the directory /if.
E.g. /if/rx
Put system counters under the directory /sys.
E.g. /sys/vector_rate
Change-Id: I5b794d16698f61bcb2063a8cd77a7c4ae36419b8
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- Generate client DUID only when DHCPv6 PD feature is enabled
- Change client DUID type from DUID-LLT to DUID-LL
- Fix coverity warnings
Change-Id: I20e518fc9a1c5f3f7ea9add7e7e03a487c99e978
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I26194e00dfb85e5cd1c65ff4e6ffd665be2d719b
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: I12fbebd1d24c37dc77c147773ea522c8a4b7b99d
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ic98945fa1ffcc73e0b239ff5cc11d45e7318613e
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ibae260273f25a319153be37470aed49ff73e957a
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
ip4 vxlan cli/api (using flow infra) to create flows and enable them on
different hardware (currently tested with i40e)
to offload a vxlan tunnel onto hw:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1
to remove offload:
set flow-offload vxlan hw TwentyFiveGigabitEthernet3/0/0 rx vxlan_tunnel1 del
TODO:ipv6 handling
Change-Id: I70e61f792ef8e3f007d03d7df70e97ea4725b101
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I35508d5251633396393f52842d1b58bc1c1463f6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Cleanup session state after last ack and avoid using a cleanup timer.
- Change session cleanup to free the session as opposed to waiting for
delete notify.
- When in close-wait, postpone sending the fin on close until all
outstanding data has been sent.
- Don't flush rx fifo unless in closed state
Change-Id: Ic2a4f0d5568b65c83f4b55b6c469a7b24b947f39
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Since the main thread is not used for session polling anymore, when vpp
is started with multiple wokers, allocate connections on the first. Also
add a simple udp make test.
Change-Id: Id869f5d89e0fced51048f0384fa86a5022258b7c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch separates setting of hardware interfaec and software
interface MTU. Software MTU is L2 payload MTU (i.e. not including L2
header). Per-protocol MTU for IPv4, IPv6 and MPLS can also be set.
Currently only IP4, IP6 are enabled in adjacency / rewrite code.
Documentation in src/vnet/MTU.md
Change-Id: Iee2fd6f0bbc8210748dd8e073ab9fab87d323690
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I3f36e5760fd2935cc29d22601d4c0a1d2a22ba84
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib8e332174d96bf9cfa4bbaaa5b8d8bc9958424b1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iaeb52d94cb6da63ee93af7c1cf2dade6046cba1d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I72a1ccdfdd5573335ef78fc01d5268934c73bd31
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I7add46258fe44bc4d23d805ffc7eae75e37cab82
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
also export per-node error counters
directory entries implement object types
Change-Id: I8ce8e0a754e1be9de895c44ed9be6533b4ecef0f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
only learn from a GARP packet if it is an update to an existing entry.
Change-Id: I4c1b59cfedb911466e5e4c9756cf53a6676e1909
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ib756c4f3e8caba1f77ef48b62a2a5d7283fe5016
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Change-Id: I77264c4398e6fad461bb4dc10867a1f9c3accec0
Signed-off-by: John Lo <loj@cisco.com>
|
|
This reverts commit d018870d1b02109fc8b328446f15312fdd2fcd11.
Change-Id: I700ade7a25ae5ed72cfed586e50b02492a4f11de
Signed-off-by: John Lo <loj@cisco.com>
|
|
- use types on the DHCP API so that the same data is sent in comfing messages and in dumps
- add the DHCP client dump API
- update VOM to refelct API changes
- rename VOM class dhcp_config* dhcp_client*
- the VOM dhcp_client class maintains the lease data (which it reads on a dump) for clients to read
Change-Id: I2a43463937cbd80c01d45798e74b21288d8b8ead
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I86019f4ff9b0c8c633638fa23341d8ce49099ba6
Signed-off-by: John Lo <loj@cisco.com>
|
|
- Modify the API send_ip6_na and send_ip4_garp to take sw_if_index instead
of vnet_hw_interface_t and add call to build_ethernet_rewrite to support
subinterface/vlan
- Add code to bonding driver to send an event to bond_process when the first
interface becomes active or when the active interface is down
- Create a bond_process to walk the interface and the corresponding
subinterfaces to send garp/ip6_na when an event is received.
- Minor cleanup in bonding/node.c
Note: dpdk bonding driver does not send garp/ip6_na for subinterfaces. There is
no attempt to fix it here. But the infra is now done and should be easy to
add the support.
Change-Id: If3ecc4cd0fb3051330f7fa11ca0dab3e18557ce1
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I9e759037295fe675abe426e565a562b1ec1e7d33
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
|
|
DBGvpp# sh bier disp entry
DBGvpp# sh bier disp entry 0
No such BIER disp entry: 0
DBGvpp# sh bier disp table
DBGvpp# sh bier disp table 0
No such BIER disp table: 0
DBGvpp# sh bier disp table 11
No such BIER disp table: 11
DBGvpp#
DBGvpp# sh bier bift
no BIFT entries
DBGvpp# sh bier bift set 0
no BIFT entries
DBGvpp# sh bier bift set 0 sd 0 bsl 0
no BIFT entries
DBGvpp#
DBGvpp# sh bier fib
No BIER tables
DBGvpp# sh bier fib 0
DBGvpp# sh bier fib 0 4
DBGvpp# sh bier fmask
DBGvpp# sh bier fmask 2
No BIER f-mask 2
DBGvpp# sh bier imp
DBGvpp# sh bier imp 0
No such BIER imposition: 0
Change-Id: Ibadac3441dd8a6d1b96bd9ee4358e28498875b95
Signed-off-by: Neale Ranns <nranns@cisco.com>
|