summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2022-03-18udp: avoid grabbing vlib main if not neededFlorin Coras1-6/+4
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I88a747cac70cb88755f50c7b337207f4ba256530
2022-03-18vppinfra: refactor *_will_expand() functionsDamjan Marion10-23/+12
Type: refactor Change-Id: I3625eacf9e04542ca8778df5d46075a8654642c7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-03-18ip: fix assert in ip4_ttl_incAloys Augustin1-1/+3
There is no need to verify the checksum for packets that have the IP checksum offload flag set. This uses the same logic as ip4_ttl_and_checksum_check. Type: fix Signed-off-by: Aloys Augustin <aloaugus@cisco.com> Change-Id: I177b07212a992362a4c965c074dcecf1e504c593
2022-03-18bfd: remove source IP check from session addKlement Sekera1-55/+0
Checking for existence of source address on interface prevents creating session before assigning address to said interface. Removing this check allows more flexibility when configuring BFD feature. Type: improvement Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: Ia57960e29b5dbdb758a7a64193c28f21482f229e
2022-03-15tcp: update error counters in listen nodeFlorin Coras1-9/+7
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ib2e1d847607c9c7d928b174b87e5c21d53153ebe
2022-03-15tcp: update persist timer if data ackedFlorin Coras1-3/+7
Update persist timer if data sent during snd_wnd < snd_mss was acked. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5c75ff8ddc0e49750b2088237d32afa4eda99e7f
2022-03-15flow: add generic flow pattern for 5G flow enhancementTing Xu2-32/+71
In order to support the requirement of RSS and packet steering of new protocols, such as GTPU PDU-type and QFI, for 5G UPF, a generic pattern is introduced in vnet flow. The generic flow pattern is based on DDP (Dynamic Device Personalization) function and Parser Library module in DPDK. Using generic flow pattern, we do not need to create new packet and field type and offset in API parser for every new protocols. We can create flows for any protocol immediately as long as supported by DDP. The generic flow can be used to support 5G related protocols in different scenarios. The input of this generic pattern are two binary strings for spec and mask. Spec is the binary presentation of the target packet type, and mask is used to mark the target fields. In this patch DPDK plugins is enabled for POC. Next step we will enable generic flow in native IAVF, which is the main target. Here is an example. If we want to create a flow for GTPU QFI, spec is: 00000000000100000000000208004500003C00000000001100000101010102020202000 008680028000034FF001C00000000000000850100010045000014000000000000000001 01010102020202 mask is: 00000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000007F0000000000000000000000000000 00000000000000 A naming API POC is created via VAPI to help create the rule with the target packet format similar to Scapy. It is based on a function module called PacketForge. In this way, the user no need to create binary string spec and mask by themselves. Type: feature Signed-off-by: Ting Xu <ting.xu@intel.com> Change-Id: Id3444f95c158bdcdfeeee19d795cd9ecbeeec07c
2022-03-11session: fix crash during client detachFilip Tehlar1-1/+3
This fixes a crash caused by client closing socket before adding worker. During detach vpp tries to delete worker based on invalid worker index. Type: fix Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I3242bcbb116ef5fd1d4c449f5bcf907e4e2f8f30
2022-03-10devices: remove the unused code from af_packetMohsin Kazmi2-6/+0
Type: refactor Change-Id: If180816303909b92c9aa4ff9fd70dc7938a6cfbe Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2022-03-10ipsec: remove the redundant codeMohsin Kazmi1-1/+0
Type: refactor Change-Id: I0a40e22e1439e13ffdbcbd6fd7cad40c8178418c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2022-03-09ip: IPv4 Fragmentation fix for l2fragmetable sizeNeale Ranns1-10/+7
Type: fix The l2unfragmentable size is not included in the calculation of 'max', the maximum amount of data that can be added to a fragment, therefore the fragments created are too big. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Id1e949ad98203b6f8ea2f55322ef6fa3d507e2a6
2022-03-09stats: refactorDamjan Marion5-30/+147
Type: refactor Change-Id: Ifd533a095d979dc55bfbe5fac7e0b7510a4d900c Signed-off-by: Damjan Marion <damarion@cisco.com>
2022-03-08classify: add API to retrieve punt ACL tablesBenoît Ganne2-0/+45
Type: feature Change-Id: Ica3e60836c0f26518ba2c238a8c03ce3648ea69b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-03-08ipsec: input: drop by default for non-matching pktsZachary Leaf1-0/+14
As per IPSec RFC4301 [1], any non-matching packets should be dropped by default. This is handled correctly in ipsec_output.c, however in ipsec_input.c non-matching packets are allowed to pass as per a matched BYPASS rule. For full details, see: https://lists.fd.io/g/vpp-dev/topic/ipsec_input_output_default/84943480 It appears the ipsec6_input_node only matches PROTECT policies. Until this is extended to handle BYPASS + DISCARD, we may wish to not drop by default here, since all IPv6 traffic not matching a PROTECT policy will be dropped. [1]: https://datatracker.ietf.org/doc/html/rfc4301 Type: fix Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: Iddbfd008dbe082486d1928f6a10ffbd83d859a20
2022-03-08ip: set fib_index before exiting input ACL nodeArthur de Kerhor1-40/+75
While setting an ACL, a user can specify the adjacency to follow after the input ACL node. Thus, we may skip a lookup and enter directly a local node (ex: ip4_local). To prevent the local source check from failing, we need to specify the fib index. And, we have to do it just before exiting the input ACL node because the l2_classify object is overlapping with the fib_index in the vnet_buffer_opaque_t struct. We could have added a padding to avoid this overlap but there is no place for that in the structure. Type: fix Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Change-Id: I383c36e4aec08d181f966f28565aefed950d2a74
2022-03-07ip: Fixes for IPv6 and MPLS fragmentationNeale Ranns2-52/+76
Type: fix - IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer - IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places - IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local - IPv6oMPLS should send back TooBig ICMP6 for non locally generated Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
2022-03-04ip: rate-limit the sending of ICMP error messagesNeale Ranns2-2/+58
Type: improvement For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages. The rate limiting is done based on src,dst IP address of the received packet. the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
2022-03-04ip: fix overflow in ip6_ext_header_walkBenoît Ganne1-1/+1
ip6_ext_hdr_chain_t->eh is IP6_EXT_HDR_MAX elements. Type: fix Change-Id: I28b8d610d8f5c0c520c8391c37b86e837655ab12 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-03-04pg: fixing the cliMohsin Kazmi1-2/+0
Type: fix This patch removes the assert and it is unnecessary. Because given variable is used for branch testing. Change-Id: I64f57f909fcba205216296e86c1cde2a5dadbb45 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2022-03-04pg: add support for ip mode through cliMohsin Kazmi1-2/+8
Type: improvement Change-Id: I5dda196ab8f1b634fcac46acd5c57a6dd726759c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2022-03-04ipfix-export: fix the warning message for uninitialized variableMohsin Kazmi1-2/+2
Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I2b8b6a3b5a6df71e84ce2f15ef7117f390121c2f
2022-03-04classify: skip l2 header in CLIArthur de Kerhor1-14/+50
Add the possibility to create masks and matches without l2 header in the CLI when creating tables and entries. This is useful for tables working on l3 and l4 only. Type: improvement Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Change-Id: I7da9e47d810c0b4a0938e2cb3bc31aa69ace3649
2022-03-04mpls: Fix the fragmentation in mpls-output.Neale Ranns1-84/+80
Type: fix the MTU needs to be adjusted to account for the label stack, since the size of fragments produced is stack+mtu. these changes are to the use of the stack variable 'mtu' most of the patch results from appeasing checkstyle. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I8d0e10cf52ca4dd8ecdc224ed6c54a13e4768fdd
2022-03-04tunnel: Fix the format of tunnel flagsNeale Ranns1-10/+17
Type: fix it only display the first flag set Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I45cddbac0d4eed8bda10bf5e0f7c9db0faf183c5
2022-03-03vnet: use system time for pcap traceBenoît Ganne1-0/+1
Use system wall-clock time for packets timestamps instead of the time since VPP started for pcap traces. Type: improvement Change-Id: I716165912efe8db3a8861d5c10597dc7629d2293 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-03-03session: improve tx tracingFlorin Coras1-10/+10
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4fd7ae435514eb986543302c7e3e69e04acba8cf
2022-03-03ip: Path MTU DPO allocation function is publicNeale Ranns2-7/+23
Type: refactor check for pool expansion in the DPO allocation, just in case. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6ba7dd66313630d3f24a51700ab4486ba43d856b
2022-03-02tap: fix tun set mtuBenoît Ganne1-1/+1
Type: fix Fixes: 1cd0e5dd533f4209dde453eaa43215e52cd42985 Change-Id: I64318585fb3b12369b78735c681f3b747c67b53b Signed-off-by: Benoît Ganne <bganne@cisco.com>
2022-03-01virtio: refactor codeMohsin Kazmi19-355/+351
Type: refactor Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I3788cc857023fafcc8eb6d6ff4524425026a75d8
2022-02-28tls: handle read write ssl errorsFlorin Coras2-0/+11
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: If5eed7dac4951f0510a4b4b092f66f44d0d3cacd
2022-02-28tls: Receive only when the app_session is availableSaravanan Murugesan1-0/+5
Type: fix Signed-off-by: Saravanan Murugesan <sarmurug@cisco.com> Change-Id: Icfd5e3c0bb034684c7bc43be46927294536ba08a
2022-02-24session: fix session layer socket readFilip Tehlar1-2/+27
This fixes an issue caused by session layer reading expected part of data (cert + key) before the client actually sends it. Type: fix Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I6ddddb08f9576211b302e814d7c2b040383e5fb7
2022-02-23build: export missing header files required by hicn_pluginDave Wallace1-0/+2
- HICN project's hicn_plugin requires vnet header files fib/fib_entry_track.h and udp/udp_encap.h to be included in build-root/install-vpp*-*/vpp/include/vnet Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Iabd3f8fe0aee8d727758fc6ef202e859d68d63a3
2022-02-22vxlan: crash on assigning IP address to interfaceEd Warnicke2-8/+6
Revert "vxlan: crash on configuring vxlan tunnel on l3 mode" This reverts commit b8de7d43e4955bb4025cd0e0e7390279841b6d7d. Reason for revert: VPP-2014 Type: fix Fixes: b8de7d43e4955bb4025cd0e0e7390279841b6d7d Change-Id: Ic4d10f28985ee10e0550a1bbfd465ada915e4aa6 Signed-off-by: Ed Warnicke <hagbard@gmail.com>
2022-02-22fib: fix adj_get crashRajith P R1-1/+1
adj_get() crashed in worker thread. The index is valid but was freed. 0x00007fba5fb07921 in __GI_abort () at abort.c:79 0x00007fba528de7c3 in os_panic () at /development/libvpp/src/vpp/vnet/main.c:618 0x00007fba506f2a19 in debugger () at /development/libvpp/src/vppinfra/error.c:84 0x00007fba506f2797 in _clib_error (how_to_die=2, function_name=0x0, line_number=0, fmt=0x7fba521cecd9 "%s:%d (%s) assertion `%s' fails") at /development/libvpp/src/vppinfra/error.c:143 0x00007fba51d88254 in adj_get (adj_index=79) at /development/libvpp/src/vnet/adj/adj.h:472 0x00007fba51d87642 in icmp6_neighbor_solicitation_or_advertisement (vm=0x7fb9f19a0580, node=0x7fb9bb820340, frame=0x7fb9b718bc40, is_solicitation=0) at /development/libvpp/src/vnet/ip6-nd/ip6_nd.c:134 0x00007fba51d8f479 in icmp6_neighbor_advertisement (vm=0x7fb9f19a0580, node=0x7fb9bb820340, frame=0x7fb9b718bc40) at /development/libvpp/src/vnet/ip6-nd/ip6_nd.c:348 Type: fix Signed-off-by: Rajith P R <rajith@rtbrick.com> Change-Id: Ibe29854137ee9680f7947450eb7e256b8c0ade31
2022-02-22fib: fix mpls db label overflowDmitry Valter1-1/+1
mpls fib DB size was 2^20 instead of intended 2^21. Therefore large mpls labels caused DB to overflow and write to other tables or some random objects. Or crash with ASAN. Sometimes. Type: fix Signed-off-by: Dmitry Valter <d-valter@yandex-team.ru> Change-Id: I6db65680037a266fe47e8213464a0c16de63c06c
2022-02-18fib: Use the VLIB logger for adjacency debuggingNeale Ranns2-13/+13
Type: improvement remove the [un]lock logs, they are not useful. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I903d3088b8ed9831f931208aeb6b6862a945550c
2022-02-18vnet: add set_max_frame_size callbacks for several interfacesArtem Glazychev2-0/+18
This is required after distinguishing between max_frame_size and MTU Type: fix Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Change-Id: Ie642bee4e30ca76903bb8be5eeb6914c2c09bf35
2022-02-18ipsec: fix vector after remove entry in spdGabriel Oginski1-1/+1
Originally after remove the policy entry in spd, macro "vec_del1" can change localization of the last entry in vector and finally the entry list has not been sorted. This patch fixes this issue by change executed macro "vec_delete" instead of "vec_del1". Type: fix Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com> Change-Id: I396591cbbe17646e1d243aedb4cdc272ed4d5e25
2022-02-17tls http srtp: fix session index for listenersFlorin Coras1-0/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: If5e6d0e8c686ea93674d6201c38b3a4d1c4786a5
2022-02-17ip: Move the IPv6 echo responder into the ping pluginNeale Ranns1-187/+0
Type: refactor To be consistent with the location of the IPv4 responder Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie3a5c3ecc10755317591d7ff57b74770c2798e77
2022-02-17ipsec: Improve the handling of NAT-T keepalive messagesNeale Ranns1-8/+21
Type: improvement Ethernet frames on the wire are a minimum of 64 bytes, so use the length in the UDP header to determine if the ESP payload is one bytes of the special SPI, rather than the buffer's size (which will include the ethernet header's padding). In the case of drop advance the packet back to the IP header so the ipx-drop node sees a sane packet. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ic3b75487919f0c77507d6f725bd11202bc5afee8
2022-02-16fib: Use the same adjacency that BFD is usingNeale Ranns3-30/+31
Type: improvement When the adj subsystem is notified of a BFD session, it attempts to find the appropriate adjacency from the session's key. This could lead to a mismatch between the adj used by BFD and that of FIB. The BFD session stores the adj it is using, so FIB uses that instead. Since adj is now using the same adj as BFD, it does not need to maintain its own locks. In BFD it is necessary to initialise the adj index used in INVALID and ensure it is not unlock before listeners are notified of the session delete. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I9630867b10bb18969475299a0c754942a8df0f44
2022-02-16bfd: On a point to point link use the all zeros address for the peer.Neale Ranns1-8/+12
Type: fix The adjacency used is then the same one as that used by routes in the FIB and so the BFD protection/fast-failover works for thise route, since they are children of the BFD protected adjacency. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I72e10b3074697cba8a002a4c1acf690983985157
2022-02-16ipfix-export: pass ipv4 addr to format fn for showPaul Atkins1-3/+4
When the ipfix address was changed to be an ip_address instead of an ip4_address the output when creating an exporter via the cli should have been modified to take the address of the v4 part of the addr. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I141456cd9092c861a4c4aefba4035dbde23efcd6
2022-02-16crypto: Fix for the crash in cryptomgovind1-0/+4
Fix for the crash when both crypto_native_plugin and DPDK QAT are enabled in startup conf. Type: fix Signed-off-by: mgovind <govindarajan.mohandoss@arm.com> Change-Id: Ib020ed7130a99080a093c70c06d47bcacd6d23b1
2022-02-15tcp: Do not include the tcp_packet.h file in the ip4_packet.hNeale Ranns12-97/+106
Type: refactor IP4 does not depend on TCP (it's the other way around). This upside down dependency leads to some nasty circular includes when trying to use ip46_address.h in interface.h Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4a1bd21543b08b9c1cf1e5563da738414734a878
2022-02-14bfd: add per session countersKlement Sekera4-28/+128
Add udp total session counts - as stat segment entries: /bfd/udp4/sessions /bfd/udp6/sessions and per session packet/byte counters: /bfd/rx-session-counters /bfd/rx-session-echo-counters /bfd/tx-session-counters /bfd/tx-session-echo-counters These counters are per-thread and per-session id. Adjust tests to verify proper function. Type: refactor Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: Ie597928022b6ac74c2220019b9e8e1714295f170
2022-02-14bfd: refactor code to fix misc warningsKlement Sekera3-131/+110
This change fixes multiple unused parameter warnings, narrowing conversion warnings and identical switch statement warnings. Type: refactor Signed-off-by: Klement Sekera <klement.sekera@gmail.com> Change-Id: I4140e939c409ce06cc5aaaf5e1b042681f7ca448
2022-02-14fib: fix incorrect display of mpls fib_indexRajith P R1-1/+1
Type: fix Signed-off-by: Rajith P R <rajith@rtbrick.com> Change-Id: I8c9c85081c27bfe7ee71b5b620a2a761e027789c