Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I3ac136e2a10796d8fa86ddb6f0d6cabe5fa749f8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
pipe-rx node to match that of ethernet-input node
Since pipe-rx is a sibling node of ethernet-input, it ought to perform similarly: set l2/l3 header offsets,
and l2.l2_len value if the interface is in the l2 mode.
The use cases of pipes do not assume the tagged traffic, so
assume the simple ethernet header.
Change-Id: I7c9b5f4f2b1402cfbd10513f76cdd59b2db7a7a6
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
This is first part of addition of atomic macros with only macros for
__sync builtins.
- Based on earlier patch by Damjan (https://gerrit.fd.io/r/#/c/10729/)
Additionally
- clib_atomic_release macro added and used in the absence
of any memory barrier.
- clib_atomic_bool_cmp_and_swap added
Change-Id: Ie4e48c1e184a652018d1d0d87c4be80ddd180a3b
Original-patch-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
|
|
Change-Id: Ie46b3a81de4ed39b7b40e3879436f7e5a2908d98
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0bc4062c1fd3202ee201acb36a2bb14fc6ee1543
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- fix delete of connection in syn-received
- fix delete of half-open connection
Change-Id: I72ff4b60406a2762d998328c52f41adea40d2c1b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I104f2b4e0b1c354d3671962be3f6002f2721388d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I3ef0725684bcb8ea526abe0ce62562b35a0070f5
Signed-off-by: Eyal Bari <ebari@cisco.com>
(cherry picked from commit 0d87894bf279a4678cfca6cc438583090b166f85)
|
|
Change-Id: I0bfa4c9a3bb22155d7862cc13019cb172e77407c
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1be7c59df7b48875f81ebeebf5f39ed15a43d2d8
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If81ee34e1f1e929de1a5b758ddb9aede4002e858
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Break up bond tx function into multiple small workloads:
1. parse the packet header and hash it based on the configured algorithm
2. optionally, trace the packet
3. convert the hash value from (1) to the slave port
4. update the buffers with the slave sw_if_index
5. Add the buffers to the queues
6. Create and send the frames
old numbers
-----------
Time 5.3, average vectors/node 223.74, last 128 main loops 40.00 per node 222.61
vector rates in 3.3627e6, out 6.6574e6, drop 3.3964e4, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
BondEthernet0-output active 68998 17662979 0 1.89e1 255.99
BondEthernet0-tx active 68998 17662979 0 2.60e1 255.99
TenGigabitEthernet3/0/1-output active 68998 8797416 0 1.03e1 127.50
TenGigabitEthernet3/0/1-tx active 68998 8797416 0 7.85e1 127.50
TenGigabitEthernet7/0/1-output active 68996 8865563 0 1.02e1 128.49
TenGigabitEthernet7/0/1-tx active 68996 8865563 0 7.65e1 128.49
new numbers
-----------
BondEthernet0-output active 304064 77840384 0 2.29e1 256.00
BondEthernet0-tx active 304064 77840384 0 2.47e1 256.00
TenGigabitEthernet3/0/1-output active 304064 38765525 0 1.03e1 127.49
TenGigabitEthernet3/0/1-tx active 304064 38765525 0 7.66e1 127.49
TenGigabitEthernet7/0/1-output active 304064 39074859 0 1.01e1 128.51
Change-Id: I3ef9a52bfe235559dae09d055c03c5612c08a0f7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4ba0aeb65219596475345e42b8cd34019f5594c6
Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
|
|
- ensure session enqueue epoch does not wrap between two enqueues
- use 3 states for echo clients app, to distinguish between starting and
closing phases
- force tcp fin retransmit if out of buffers while sending a fin
Change-Id: I6f2cab46affd1148aba2a33fb6d58bcc54f32805
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9052202b8cbcf656e61d635253d515f0f3a8d145
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Icd48de31302f62c59961c573699a1dd0474b8acb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- add epoll dequeued events beyond maxevents to unhandled
- filter multiple epoll rx events
Change-Id: I618f5f02b19581473de891b3b59bb6a0faad10b5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
keep the number of buckets in the load-balanced fixed. If a
path goes dwon fill its buckets with those from the next
available up path.
Change-Id: I15603ccb899fa9b77556b898c99136379cf32eae
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This commit adds two new nodes in the L2
datapath in input and output direction respectively.
These nodes fork the traffic into three feature
arcs: ip4, ip6 and nonip, which later join
to continue the usual L2 processing.
The vnet_l2_feature_enable_disable() function
with the same signature as
vnet_feature_enable_disable() takes care of
enabling the L2 datapath feature bits as needed, when
the features are enabled/disabled.
Thus, L2 features may use the similar plumbing as
the L3 features enjoy.
Change-Id: I76877b3a92d794c492bff1622bb26acba05705b2
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Idfed8243643780d3f52dfe6e6ec621c440daa6ae
Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
|
|
Change-Id: I70fb7394f85b26f7e632d74fc31ef83597efdd16
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I913ffc963928b74cf4753b6b9a0eed4436887e04
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I544b24d2b2c4a09829773cf180d1747f4b087d4c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
fastpass case (VPP-1444)
20e6d36b has moved the calculation of the l3_hdr_offset into the determine_next_node()
function, with the assumption that the current_data in the buffer is at
the L3 header. This is not the case for the single loop fastpath,
where the vlib_buffer_advance() call is made after the call to
determine_next_node(), as a day1 behavior. As a result - that path
incorrectly sets the l3_hdr_offset.
Solution: move the vlib_buffer_advance() call to before determine_next_node()
Change-Id: Id5eaa084c43fb6564f8239df4a0b3dc0412b15de
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 376414f4c3f53af44da4e82ee5d0b1843b291f8e)
|
|
Change-Id: I3cb89dbfb7174b9913a8c4ad9b3b1dc9f6ed6326
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
when multiple session creating script is ran (via exec) only the first
one actually starts
Change-Id: I0fc36f65795c8921cf180e0b555c446e5a80be45
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I5495c37da2fb8ff48c4af14ccba021d64eac52b6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If3abeab2b304e2df41139707a4c8d045fab6ef99
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: If178dd38e7920f35588f5d821ff097168b078026
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The issue surfaced when developing the tap GSO code, with
an iteration where output path is reliant on
vnet_buffer (b0)->l3_hdr_offset being set correctly in
the input path, during performance testing.
Adding a workaround in the TX path shows that
the issue surfaces only for relatively few packets
during the test (about 100 out of 600000).
Analysis shows the issue arises if the ethernet-input
is handling two untagged packets with different sw_if_index
values - then the accelerated path punts to slow path,
before the setting of the l2.l2_len values is done,
thus resulting in them being 0, and l3_hdr_offset being
the same as l2_hdr_offset, wreaking havoc on TX path.
The solution is to move the l2_hdr_offset calculation
into a place where it is done for all the packets,
and move the l3_hdr_offset calculation into
the determine_next_node() function - as that function is
also the one setting the special-case l2.l2_len value for
tagged packets and moving the current_data for the L2 case.
Change-Id: If728c7715e011930c1887691188c98055bddde67
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I3c84daf046dbad972b36e48fa2548bbe20c7b338
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Change-Id: I785ecadbf30812a500629870aa717e64f4cf0cdd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
active-backup mode is using l2 load balance algo. It should be using
active-backup. Also notice that the output is missing a character.
vpp# create bond mode active-backup
create bond mode active-backup
vpp# sh bond
sh bond
interface name sw_if_index mode load balance active slaves slaves
BondEthernet0 6 xor l34 2 2
BondEthernet1 9 xor l34 1 1
BondEthernet2 10 active-backu l2 0 0
vpp#
Change-Id: If5ed0cc6c25f6c2ddabec15ff6188b34923d38e3
Signed-off-by: Steven <sluong@cisco.com>
|
|
Introduce bond_tx_inline which takes lb as a constant for gcc to do the optimization
The number appears a tad better for 256 bytes frame.
with the patch
--------------
Thread 2 vpp_wk_1 (lcore 3)
Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61
vector rates in 8.4836e6, out 1.6967e7, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
BondEthernet0-output active 141054 36109824 0 2.51e1 256.00
BondEthernet0-tx active 141054 36109824 0 2.55e1 256.00
TenGigabitEthernet6/0/0-output active 141054 18055469 0 9.43e0 128.00
TenGigabitEthernet6/0/0-tx active 141054 18055469 0 6.97e1 128.00
TenGigabitEthernet6/0/1-output active 141054 18054355 0 9.54e0 127.99
TenGigabitEthernet6/0/1-tx active 141054 18054355 0 7.05e1 127.99
bond-input active 141054 36109824 0 1.76e1 256.00
dpdk-input polling 70527 36109824 0 5.03e1 512.00
ethernet-input active 141054 36109824 0 6.12e1 256.00
ip4-input active 141054 36109824 0 3.26e1 256.00
ip4-lookup active 141054 36109824 0 2.94e1 256.00
ip4-rewrite active 141054 36109824 0 3.27e1 256.00
without the patch
-----------------
Thread 2 vpp_wk_1 (lcore 3)
Time 4.3, average vectors/node 224.00, last 128 main loops 40.00 per node 222.61
vector rates in 8.4443e6, out 1.6889e7, drop 0.0000e0, punt 0.0000e0
Name State Calls Vectors Suspends Clocks Vectors/Call
BondEthernet0-output active 142744 36542464 0 2.51e1 256.00
BondEthernet0-tx active 142744 36542464 0 2.67e1 256.00
TenGigabitEthernet6/0/0-output active 142744 18270813 0 9.19e0 127.99
TenGigabitEthernet6/0/0-tx active 142744 18270813 0 6.98e1 127.99
TenGigabitEthernet6/0/1-output active 142744 18271651 0 9.43e0 128.00
TenGigabitEthernet6/0/1-tx active 142744 18271651 0 7.02e1 128.00
bond-input active 142744 36542464 0 1.76e1 256.00
dpdk-input polling 71372 36542464 0 5.08e1 512.00
ethernet-input active 142744 36542464 0 6.15e1 256.00
ip4-input active 142744 36542464 0 3.23e1 256.00
ip4-lookup active 142744 36542464 0 2.96e1 256.00
ip4-rewrite active 142744 36542464 0 3.28e1 256.00
Change-Id: I9fd43eda3c735cbff680ac6d2f01ecdae81f0eda
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0d42a0c71fea7dd669fb1fe5ded7e6e944245c7d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie9bb1cfce2369b448ca55a21b2f8b8bbbb81c59c
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ieb882cc67c37bf591b6c737234263c7c35416e6d
Signed-Off-By: Ian Wells <iawells@cisco.com>
|
|
store local/remote addresses + vrf + vni in hash key
store complete decap info in hash value (sw_if_index + next_index +
error)
this removes the need to access the tunnel object when matching both
unicast and mcast.
however for mcast handling it requires 3 hash lookups:
* one failed unicast lookup (by src+dst addrs)
* lookup by mcast(dst) addr .
* unicast lookup (tunnel local ip as dst + pkt's src addr)
where previously it needed 2:
* lookup by src to find unicast tunnel + compare dst to local addr
(failing for mcast)
* lookup by mcast to find the mcast tunnel
Change-Id: I7a3485d130a54194b8f7e2df0431258db36eceeb
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I3aa4708c1c3cdda344f282d56b617677080eaaa1
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I20dd2071c936eb2c1870d45860553007c8e20587
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I97052d29080501de53fe95499c860faf0765e81d
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
A copy/paste mistake caused to add padding to the buffer used to send
data.
Change-Id: I04d8dfec4ae195927be1675c5ce8b30230d5b376
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Handles next_hop_weight, next_hop_preference and next_hop_table_id
properly in vl_api_mpls_tunnel_add_del_t_handler(). Also updated
vpp_api_test and custom_dump handling of related APIs.
Change-Id: I89e211bfa3b9d8ead396b24b3c46b7c7f6511f44
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I89e90193ded1beb6cb0950c15737f9467efac1c3
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I750db7617ff9fd36647743094e0fa855e7dada86
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib2221a43347c66940b6b5f71914a451ca4627d2f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Removed 0-tags attribute for default-sub-if config
Moved default-sub-if check before untagged
Change-Id: I68043445aa2f79846e0743567b9015257fd87f8d
Signed-off-by: Mike Bly <mbly@ciena.com>
|
|
Makes it easy to add protocols that skip L4 checks.
Change-Id: I80ff95685bfa17e29c5800d9c96153cdc7739be2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I0af68f6b41d0024aa64b93a8b18e2d179bf939b0
Signed-off-by: Jerome Tollet <jtollet@cisco.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I45f540128e038ddb17ba96ce30965e8f7c732067
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|