Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Idee565af852c7bb434b886fbf31c6e76315686c4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
When using a DPDK cryptodev with IPsec, sending outbound
packets results in a crash on division by zero if using an
algorithm not supported by the OpenSSL ESP nodes. This
includes AES-GCM and MD5.
At IPsec intf creation time, the next node at slot
IPSEC_OUTPUT_NEXT_ESP_ENCRYPT for ipsec_if_tx_node_fn is
set to the node named esp-encrypt. This is the OpenSSL
ESP encrypt function. If DPDK cryptodevs are configured,
dpdk-esp-encrypt is the correct next node.
Change to setting the next node according to the value in
ipsec_main.esp_encrypt_node_index. That value is set to
esp-encrypt by default. If DPDK cryptodevs are configured
it gets set to dpdk-esp-encrypt.
Change-Id: I83896c76b975d74aead247a162c85eccca9575a8
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ic5daed1f6c23d9561a04e235dcbf257f190d066a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
It also refactors the vhost code which was in one big file vhost-user.c.
Receive side code is in vhost_user_input.c and
Transmit side code is in vhost_user_output.c
Change-Id: I1b539b5008685889723e228265786a2a3e9f3a78
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
A pipe resembles a unix pipe. Each end of the pipe is a full
VPP interface.
pipes can be used for e.g. packet recirculation, inter-BD, etc.
Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
* added the fib index into the key
* conform coding style for vxlan.h
* added "show vxlan tunnel raw" command to dump bihash
Change-Id: Icc96e41abb648e96de5b4605b035f68f9e20f8a9
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ibfd0a2e7010e6e74c32244c538f60e0713bea03f
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I383cfb662b4d2bf4f814e3eb9a1ce4d6bff7066d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I8b92652d512bad5d774c7862f9808c306bbeff18
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I4554d1e94bd70ef5b3b0aaeb1a0fceaeb81c5f96
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0573d0aff39581bba96e610228a10ae923a8ca06
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib988d87e6758ffa31862096391f9f286b0797f2b
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
Also add single loop prefetch in session tx
Change-Id: Ib2725a2552fcc1a65050d7a2eb10491a7b34db62
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Does some session node cleanup as well
Change-Id: Ifd52b07b28ba4dec1f6f729476decc76eb963837
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I843d094b6bbd1cefba82d6026174be005e66d510
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
outside the ip_frag nodes
Change-Id: I46d3d10fa763fcf7a579620ec7cf1b204a53bce8
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
|
|
and a new ip4-options node, inserted between ip4-input and ip4-punt,
that checks for IP-router-alert option + IGMP combination and sends
the packet to the ip4-local. This is required because some IGMP
packets are sent to the group address and not the all-routers address.
All IGMP packets are sent with the router alert option.
Change-Id: I01f478d4d98ac9f806e0bcba0f6da6e4e7d26e2a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ib88d703bb7d4b170059960b0688352c90c5fcc39
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Idcba72fd84128547718dd32858e8c728925a6b1d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I19690db9996ecb8c5e86415d2fd3c7133ce698f8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ida678e6f31daa8decb18189da712a350336326e2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
gcc8 introduced a new warning (Wstringop-truncation) which in our case
is being treated as error.
Disabling the warning globally might introduce bugs related to string
truncation which are not desired by the developer (e.g. bug).
Instead, this patch disables the warning only for those occurences
which have been verified to be non-bugs but the desired behaviour as per
developer will.
Change-Id: I0f04ff6b4fad44061e80a65af633fd7e0148a0c5
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- cache and reuse tcp options and rcv_wnd for session layer tx bursts
- avoid reading/setting total_length_not_including_first_buffer. It's
part of a buffer's second cache line so it comes at a "cost".
Change-Id: Id18219c2f7e07cf4c63ee74f9cdd9e5918904036
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
ASSERT (ip_csum_with_carry (d, x) == c) will raise assert
if d equals to zero while x not equals to zero.
Change-Id: Ia9ccdbf801ae565eaadd49f04569d13bfc31cba8
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I00a0d7f57dc144d338d5ad45b0a6e3720c32c400
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Thanks to gcc-8 for highlighting this...
Change-Id: I53bfab631a40fd1b680c76a48b0307a33fa2b154
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- sprinkle statics for functions
- move some inlines from header files to corresponding .c files
- replace some always_inlines with statics where inlining is not
performance critical
Change-Id: I371dbf63431ce7e27e4ebbbdd844a9546a1f1849
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Check ARP request packet with bad requester MAC/IP address and
drop these packets. Also removed useless VRRP check in the node.
Change-Id: I2c8a774d291928eb623b3a515f1edf7e338fa760
Signed-off-by: John Lo <loj@cisco.com>
|
|
Because it avoids pool putting/getting the timer, this function is
somewhat faster than stopping and restarting a timer.
Change-Id: Id99ed9d356b0b1f7e12facfe8da193e1cd30b3ec
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Only remaining traces of MAP in the src/vnet is now in buffer.h.
Awaiting a new buffer opaque API (hint, hint).
Change-Id: Ie165561484731f1d7ed6e0f604b43624e06db3f0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit e0d2bd6bd7fc59c0c6ac48195d7f825dc99bfd91.
Change-Id: If491e16f9ea66b2493a6a7c7f3c684ed585f8f51
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This reverts commit a98346f664aae148d26a8e158008b773d73db96f.
Change-Id: Iee5b3a5ddff0e8fd3a30fe5973cee24de434fe12
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
It would seem that this avoids using the stack for computing the
subsequent crc32 by storing the 2 x u64 ip4 5-tuple key into two
registers. Probably the cast to the "convenience" data structure "masks"
the fact that the key is 16B. Probably ... :-)
"sh run" on an ip4 tcp sender reports that the number of clocks spent in
tcp_input, where a session lookup is performed, drops ~25% (from ~100
clocks/packet to ~75 clocks/packet)
Change-Id: I50d647115ac72f8407bff7e3b73328ba42f0ddb5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The documentation in the API file says that 0xffff == 'no interface
ID specified' but the code tests against ~(u32)0.
Change-Id: I5cd83d876c3ad4f53a5b01463299d4fcb806ea98
Signed-off-by: Ian Wells <iawells@cisco.com>
|
|
Calculate IP/TCP/UDP checksums in software before adding authentication.
Change-Id: I3e121cb00aeba667764f39ade8d62170f18f8b6b
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I4a7e4f616ed4a4df82be3112ac4702f7e4e2025c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I682a47d6cf9975aca6136188d28ee93eaadf4fe3
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I2f638f1932b4aeddf2408c06d1b8393551675b72
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I28d3c31bdc4255a4ca223d80bcf44709fb39f4ed
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I761aced55b7cef51a9b47048283b2cb9430bcde2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
If the sw-if-index is set to -1, it will send out all interfaces' arp enties. In this case, the sw-if-index is always set to -1. It is not correct.
Change-Id: I21e9ee078c757ac7efa70a2a1f1a7a4eb73d66a1
Signed-off-by: Brant Lin <brant.lin@ericsson.com>
|
|
Change-Id: Idf17a0633a1618b12c22b1119e40c2e9d3192df9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ib98cfc93f6c574de5250f251925f7ed4e86f5f6f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
After calling vlib_packet_template_get_packet(), make sure
packet buffer is allocated before using it.
Change-Id: Idb5199f4e2c9596137b2101e502d611f474a6ffe
Signed-off-by: John Lo <loj@cisco.com>
|
|
When computing tcp/udp checksums across large amounts of data -
e.g. when NIC h/w checksum offload is not available - it's worth
providing arch-dependent code; if only to compile the code w/ -O3.
Fix calculation when data is fully unaligned / on an odd byte
boundary.
Add a buffer alignment test vector.
Change-Id: I7644e2276ac6cbc3f575bf61746a6ffedbbb6150
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Jira ticket VPP-1196
Jira ticket VPP-1081
Jira ticket VPP-1078
Jira ticket VPP-1217
Change-Id: Id7e85229cae1017acb0aa4ca63ced334e6dafb8d
Signed-off-by: pcamaril <pcamaril@cisco.com>
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
Signed-off-by: pcamaril <pcamaril@cisco.com>
Signed-off-by: Michal Cmarada <michal.cmarada@pantheon.tech>
|
|
Put error counters under node_index.
/err/<node-name>/<error-name>
E.g:
/err/ip4-lookup/Hash table collisions
/err/ip6-rewrite/Buffer allocation error
Error names are not globally unique, and this allows
for walking all errors for a particular node.
Put interface counters under the directory /if.
E.g. /if/rx
Put system counters under the directory /sys.
E.g. /sys/vector_rate
Change-Id: I5b794d16698f61bcb2063a8cd77a7c4ae36419b8
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- Generate client DUID only when DHCPv6 PD feature is enabled
- Change client DUID type from DUID-LLT to DUID-LL
- Fix coverity warnings
Change-Id: I20e518fc9a1c5f3f7ea9add7e7e03a487c99e978
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I26194e00dfb85e5cd1c65ff4e6ffd665be2d719b
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Change-Id: I12fbebd1d24c37dc77c147773ea522c8a4b7b99d
Signed-off-by: John Lo <loj@cisco.com>
|