summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2019-06-07ipsec: remove the set_key APINeale Ranns9-395/+0
there's no use case to just change the key of an SA. instead the SA should be renegociated and the new SA applied to the existing SPD entry or tunnel. the set_key functions were untested. Type: refactor Change-Id: Ib096eebaafb20be7b5501ece5a24aea038373002 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-07gre: update gre.api with explicit typesOle Troan1-6/+5
Change-Id: I0036c216b79afb66b982b1b6a7e81f738f3b61dc Type: refactor Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-07p2p ethernet: update p2p_ethernet.api with explicit types.Ole Troan1-5/+8
Change-Id: Id6b2c2321c5f1d56e7cfab24a7c1641b38e94e19 Type: refactor Signed-off-by: Ole Troan <ot@cisco.com>
2019-06-07bfd: midchain adjacency supportMatthew G Smith1-10/+51
Support an adjacency with lookup_next_index of IP_LOOKUP_NEXT_MIDCHAIN so tunnel interfaces can have BFD configured on them. Also, check if the interface a session is configured on is up and skip assembling the packet and calculating the checksum if the interface is down. Change-Id: I44f76478d0fc1592e3491dd9368819a5c957e74a Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-06-06IP-Punt-redirect: allow the use of a FIB path to describe how toNeale Ranns9-384/+433
redirect Change-Id: I2a3ba2a3d73ea8511e3a511855b041432328f0a8 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-06DVR: Control the reinject as L2 or L3 based on the output interface typeNeale Ranns3-11/+84
Change-Id: Ib4cdbe8a6a1d10a643941c13aa0acbed410f876c Type: Feature Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-06reassembly: support more custom options for appsKlement Sekera3-49/+146
Change-Id: Ib9f98fba5a724480ca95f11a762002c53e08df70 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-06-05ipsec: fix combined counters in ah-encrypt nodeFilip Tehlar1-3/+5
Type: fix Fixes: 1197449 Change-Id: Icdda3c667ba76542ea3af5d66cc7c3fb10ade1ca Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-06-05ipsec: fix sa counters in esp-encryptDamjan Marion1-4/+7
Type: fix Fixes: c59b9a2 Change-Id: I6021e67196a4d31ab11d4e3cfbda34b678150701 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-06-05ipsec: fix sa counters in esp-decryptDamjan Marion1-6/+7
Type: fix Fixes: b4fff3a Change-Id: I2552cbc0a02e7445825a5a4ce290cde3d10c5f0b Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-06-05In ip6_mfib_forward_rpf_node,is_v4 should be 0.mu.duojiao1-1/+1
Change-Id: I9de63cebfcef8898d0ea4c9c2b7451b168b06c2c Signed-off-by: mu.duojiao <mu.duojiao@zte.com.cn>
2019-06-05L3 cross connectNeale Ranns1-4/+8
- all packets input on interface X are load-balanced over the set of paths provided. Change-Id: Ic27cb88c4cd5d6d3462570632daff7a43d5a652d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-05IPSEC: some CLI fixesNeale Ranns5-10/+16
Change-Id: I45618347e37440263270baf07b2f82f653f754a5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-04punt: fix the set_punt API/CLI which was rejecting valid portsNeale Ranns1-11/+11
add a UT for the API Change-Id: I93fb6ec2c5f74b991bf7f229250a30c0395b8e24 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-04features will register udp ports once configuredJakub Grajciar3-15/+33
plugins: - ipfixcollector vnet: - geneve - vxlan_gpe - vxlan Change-Id: I69a8b4017ee6990f2b4874fe3e94c4520bde7101 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-06-04Fix: bug prevented IPsec ipv4 SPDs to show correctlyGuillaume Solignac1-4/+9
Because of the initialisation of the end of the range, the command show ipsec spd on an ipv4 SPD didn't work correctly. Change-Id: I3582382197bb6edef4fb077aac1e927ef4581cbf Signed-off-by: Guillaume Solignac <gsoligna@cisco.com>
2019-06-04Punt: specify packets by IP protocol TypeNeale Ranns11-38/+282
Change-Id: I0c2d6fccd95146e52bb88ca4a6e84554d5d6b2ed Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-04srp: leverage vlib_buffer_get_currentZhiyong Yang1-3/+3
Change-Id: I8e4592734cd8343cd95b32ad8617fed4aec3f590 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-06-03ARP: add feature arcNeale Ranns7-168/+508
- arp-input, registered with the ethernet protocol dispatcher, performs basic checks and starts the arc - arp-reply; first feature on the arc replies to requests and learns from responses (no functional change) - arp-proxy; checks against the proxy DB arp-reply and arp-proxy are enabled when the interface is appropriately configured. Change-Id: I7d1bbabdb8c8b8187cac75e663daa4a5a7ce382a Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-06-02IPSec: memcpy of integ key borkNeale Ranns1-1/+1
Change-Id: Icd76769d841792eb2d59ffc23c557dcca9ddc580 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-31VPP-1692: move NULL pointer checkDave Barach1-5/+5
TBH, this looks like merge damage or some such. Perfectly fine NULL pointer check, about three lines after it was needed. Change-Id: I52831062e30533a59fb76b644ee5ae389676d2ae Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-31tools: FEATURE.yaml meta-data infrastructureOle Troan1-0/+22
Add tooling for feature metadata configuration files. The main tool is in src/scripts/fts.py make checkfeaturelist to validate against schema. make featurelist to dump all feature lists to stdout. Example feature definition: name: IP in IP tunnelling maintainer: Ole Troan <ot@cisco.com> features: - IPv4/IPv6 over IPv4/IPv6 encapsulation: - Fragmentation and Reassembly - Configurable MTU - Inner to outer Traffic Class / TOS copy - Configurable Traffic Class / TOS - ICMPv4 / ICMPv6 proxying - 6RD (RFC5969): - Border Relay description: "Implements IP{v4,v6} over IP{v4,v6} tunnelling as described in RFC2473. This module also implement the border relay of 6RD (RFC5969)." state: production properties: [API, CLI, STATS, MULTITHREAD] missing: - Tunnel PMTUD - Tracking of FIB state for tunnel state - IPv6 extension headers (Tunnel encapsulation limit option) JSON schema is embedded in fts.py Example markdown: https://github.com/otroan/scratch/blob/master/features.md Change-Id: I903b4ee6b316a9378c259e86dc937092e5d4b7da Type: make Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-31bonding: add support for numa awarenessZhiyong Yang3-12/+89
This patch enables bonding numa awareness on multi-socket server working in active-backeup mode. The VPP adds capability for automatically preferring slave with local numa node in order to reduces the load on the QPI-bus and improve system overall performance in multi-socket use cases. Users doesn't need to add any extra operation as usual. Change-Id: Iec267375fc399a9a0c0a7dca649fadb994d36671 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-30IP load-balance; perf improvement using the usual reciepeNeale Ranns2-305/+233
before and after: ip4-load-balance 1.54e1 ip4-load-balance 1.36e1 p.s. Quad loops were not beneficial Change-Id: I7bc01fc26288f0490af74db2b1b7993526c3d982 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-30FIB: correctly report IPv6 FIB Unicast and Multicast memory usage (VPP-1578)"Neale Ranns6-16/+34
and document scaling Change-Id: I65d8999e65616d77e525963c770d91e9b0d5e593 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-30lisp-cp: start lisp retry service on demandFlorin Coras2-8/+18
Change-Id: I07681d94301e19389dda0caacd5a93b21d9aff1f Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-05-30ipip: refactor ipip.api with explicit typesOle Troan2-24/+16
Use explicit types vl_api_address/prefix in ipip.api. Change-Id: Ib3133cebdbe4437742924efd49cde4009c4cc31b Type: refactor Signed-off-by: Ole Troan <ot@cisco.com>
2019-05-30Start the dns resolver process on demandDave Barach3-8/+19
Change-Id: Iab27b405fb3ca7aed94ae974d57c286c41298c3a Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-30IPsec: modify post-decrypt buf len calculationMatthew G Smith1-2/+2
For tunnel mode, after decryption the buffer length was being adjusted by adding (iv length + esp header size). Subtract it instead. Required for BFD to work on an IPsec tunnel interface. BFD verifies that the amount of received data is the expected size. It drops the packet if the buffer metadata says that the packet buffer contains more data than the packet headers say it should. Change-Id: I3146d5c3cbf1cceccc9989eefbc9a59e604e9975 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-05-30mpls: leverage vlib_buffer_advanceZhiyong Yang1-7/+4
Change-Id: I363a4444f4d296f04371acd65c702b1a1ce70913 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-30osi_input: leverage vlib_buffer_get_currentZhiyong Yang1-3/+3
Change-Id: Ib9297b712ff7d08bf085fb0b6c9e6ffd83c5fa57 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-29ipsec: fix perf issue in esp_aad_fillDamjan Marion1-4/+7
Type: fix Fixes: 47feb11 Change-Id: I6b3b97cd361eef19c910c14fd06edb001a4c191b Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-05-29vxlan-gbp: prefetch encap header memory areaZhiyong Yang1-66/+70
This patch helps save 4.1 clocks/pkt from 62.9 to 58.8 clocks/pkt on Skylake. Change-Id: I749a88a8fa6c78243441a89d6afcd04f106af3da Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-28l2tp: l2tp-decap-local don't accept packets unless configuredJakub Grajciar3-10/+10
Change-Id: I2e48eb772dc44912192d0684b8ee631d8d975e9e Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-05-28ipsec: ah_encrypt reworkFilip Tehlar1-194/+280
call crypto backend only once per node call Change-Id: I0faab89f603424f6c6ac0db28cc1a2b2c025093e Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2019-05-28Punt: socket register for exception dispatched/punted packets based on reasonNeale Ranns14-802/+1482
- add to the Punt API to allow different descriptions of the desired packets: UDP or exceptions - move the punt nodes into punt_node.c - improve tests (test that the correct packets are punted to the registered socket) Change-Id: I1a133dec88106874993cba1f5a439cd26b2fef72 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-28Add an ip6 local hop-by-hop protocol demux tableDave Barach3-22/+341
Add a minimal ip6 hbh header processing test. ioam plugin: use ip6_local_hop_by_hop_register_protocol() in udp_ping_init(). Please test the ioam plugin udp_ping path AYEC, so I can publish the patch. Change-Id: I74e35276d6c38c31022026cfd238fad5e4a54485 Signed-off-by: Dave Barach <dave@barachs.net>
2019-05-28gre: don't register gre input nodes unless a gre tunnel is createdJakub Grajciar2-3/+4
Change-Id: Id5c0f420e32e0504cea660fed2013f3ad28088aa Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2019-05-28tap: crash in multi-thread environmentMohsin Kazmi3-5/+4
In tap tx routine, virtio_interface_tx_inline, there used to be an interface spinlock to ensure packets are processed in an orderly fashion clib_spinlock_lock_if_init (&vif->lockp); When virtio code was introduced in 19.04, that line is changed to clib_spinlock_lock_if_init (&vring->lockp); to accommodate multi-queues. Unfortunately, althrough the spinlock exists in the vring, it was never initialized for tap, only for virtio. As a result, many nasty things can happen when running tap interface in multi-thread environment. Crash is inevitable. The fix is to initialize vring->lockp for tap and remove vif->lockp as it is not used anymore. Change-Id: I82b15d3e9b0fb6add9b9ac49bf602a538946634a Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> (cherry picked from commit c2c89782d34df0dc7197b18b042b4c2464a101ef)
2019-05-28snap_input: simplify code using existing functionsZhiyong Yang1-11/+6
Change-Id: Ia0cadebab8b800e34e9574601cdebee5ca90cc6a Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-28llc_input: simplify code using existing functionsZhiyong Yang1-11/+6
Change-Id: I3906adf9aa20b4221eeb7a8b5b353c6f0cb32d04 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-28hdlc_input: simplify code using existing functionsZhiyong Yang1-10/+6
Change-Id: I527b7e43dfba05eab12591e193f07f5036e33f56 Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-27IPIP tunnel: use address types on APINeale Ranns2-46/+48
Change-Id: Ida6a8f96bd858246e993250087bed45e7084ede1 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-05-27virtio: Add gso support for native virtio driverMohsin Kazmi5-7/+77
Change-Id: I7b735f5a540e8c278bac88245acb3f8c041c49c0 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-05-27geneve: encap performance enhancementZhiyong Yang1-58/+53
This patch can help save 2.7 clocks/pkt from 51.5 to 48.5 clocks/pkt on Skylake server. Change-Id: I10173c8a147a0e54f925c7841c26f133eb75cbed Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-27rewrite vnet_interface_output_node_inline_gsoZhiyong Yang1-59/+47
1. Using vlib_get_buffers replaces original logic. 2. Simplify some implementation. Change-Id: I46cd3487c1d3289074d9dff22aa384688be326dd Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-27tcp: handle disconnects in rcv-processFlorin Coras1-0/+1
Change-Id: I005f96480e81f3e750c18261e78d0e401da7528e Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-05-25tcp: handle fin+rst in same frameFlorin Coras1-1/+8
Change-Id: Ie7a6c7b92a6beeb356f01384216a4982fb3d420e Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-05-24vxlan-gpe: improve encap performanceZhiyong Yang1-46/+41
This patch improves performance by prefetching encap header area and taking full advantage of optimized function vlib_get_buffers. After applying the patch, the function vxlan_gpe_encap can save 4.1 clocks/pkt from 41.7 to 37.6 clocks/pkt on Skylake. Change-Id: I85d486b21a2524d64f2e246dfb4183539ec2532d Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
2019-05-24ip4/6-reassembly fixesVijayabhaskar Katamreddy2-2/+11
When multichained fragments comes into reassembly, followed by buffer Linearization or dropping the buffer for other reasons inbetween disturbs the multichained mbuf linking. When packet is transmitted, followed by freeing of the buffers, woudl result in double free and packet corruptions Change-Id: Ib5711d54e61fdd6a67deb30dad0b2a14afb9c2da Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>