Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3b0041d72d835cbb11e803cc56ac4c68a68238a0
|
|
This reverts commit c2c1bfd9b72aec88526c06479b128725eb525866.
Reason for revert: Seems it's breaking ipsec esp tests
Type: fix
Change-Id: Iac590eee23cbf92a10c62dafa789aa9c3b2284dd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I3c348ad2fca8bb3d9a246af7a2aa9dc9c33f57c3
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
This fixes a special case when buffer chain enters decrypt node
and becomes a single buffer after decryption.
Type: fix
Change-Id: I1d4da029b952baa97400adb7173aa63fd97d916b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
If "no-tunnel" error erises, you will not see it in the "show errors"
output because the packet will be punted. That fact complicates
troubleshooting.
Type: improvement
Change-Id: Ic08347f81131a4a73a05b66acbfb02797373f5ab
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Turn on gso, turn off both indirect and mrg_rxbuf caused traffic received
and sent with checksum error. The problem is we are not mapping the hdr
correctly in the shared memory address.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I7ef3bc2755544167b0e624365988111b17399e89
|
|
Type: fix
Change-Id: Ib320171708bebde6d1dae0b2c665f9bcfc9102db
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I134465760272ceb29f85486cba838d8687696bbf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Fix the following issue.
1. The localsid length was not stored in sr localsid structure.
2. SRv6 mobile test cases were modified based on the new sr localsid CLI syntax.
Type: fix
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Ieb7620c35439e90a599802a7e0dba61a39707349
|
|
Support the following new features in srv6-mobile.
1. GTP4.DT
2. GTP6.DT
3. User Plane Message encoding based on draft-murakami-dmm-user-plane-message-encoding-01
4. Add SRv6 mobile test cases
Type: feature
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I890e5171bf03513d54b4830f01b9dc7f47fe7c48
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Type: fix
Change-Id: I1ba921503a41ca37ce5c920682893617740571a9
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
|
|
Type: fix
"set int state <interface> down" puts the virtio device link
down. It will not put the link in "UP" state, when
"set int state <interface up>" will be used again to change
the interface admin up. This patch fixes it.
To test:
create tap
set int state tap0 up
set int state tap0 down
sh hardware
sh int
set int state tap0 up
sh int
sh hardware
Change-Id: I3c0e31539f8a2a1e40220e7fb57eedecf408f067
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: Ifee2b3dca85ea915067b9285e3636802bf0c19a8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Some vhost-backends give used descriptors back in
out-of-order. This patch fixes the native virtio to
handle out-of-order descriptors.
Change-Id: I57323303349f6a385e412ee22772ab979ae8edbf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6ce6fb0fe0ceb8a70b6a13e6a72fdb842bfded7a
|
|
Type: refactor
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: I45c6f434065ab0ad8ada3184b5a875a32a1b3faa
|
|
Type: fix
Signed-off-by: Jawahar Santosh Gundapaneni <jgundapa@cisco.com>
Change-Id: Ife0f7749a72cc834a3d811f8cf6b5a0840157014
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I6b2c7550ae5918c27b02b1173533d2042c6c15c7
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5120eb321e9e2050eb64dca9e2dfb6256ff2b62d
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iae9f118f710153b6c0e390265039db7434e67ed8
|
|
Type: improvement
Use only one api to retrieve transport send parameters. Additionally,
allow transports to request postponing and descheduling of events.
With this, tcp now requests descheduling of sessions when the
connections are stuck probing for zero snd_wnd
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I722c974f3e68fa15424c519a1fffacda43af050c
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia2e29b4776c0f8df666da39a14c5ef2fa1693c21
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I73d27520726543d6375caad76a841339f68c3533
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ib7a9e457cb2462e6ce9e5e2af53d1f997f4ae6cf
|
|
Rather than leaving 2 bytes of junk in the upper word
of a mac address represented as a u64, zero them out.
That way later compairsons stand a chance of matching
when deleting a bridge's arp termination entries.
The volatile qualifier shouldn't be needed here, but
without it the compiler removes the clib_memcpy() at -O2.
Bad compiler. No biscuit.
Type: fix
commit: faf22cb303b65e2a6bf8dad959d7f5ee6d031c4f
Change-Id: Iebcf35fdd421293dccbcaefadef767f7e139438e
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ia8dff15855a81cf29729bdaa3ff28fbe3254fa97
|
|
Type: improvement
type re-use.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic2a2e6babf9ae66a1e53aec53a6cd157e1893dc8
|
|
Type: fix
Change-Id: I901c9384710eee5847b3fbce060c78e115ba4169
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3a21afef86990c1198ffcc47ffe2dba8a97125ee
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I7f6f37ec6eed780322e2488d6eb0f5681945ba09
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: fix
Fixes: b49bc1a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I3dd81a2484c8b4925fd07556576c29d1cde337e1
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia14f33992353b419b70b55beed63ab8ed6a2e837
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Implements the uN behavior
Type: feature
Change-Id: Icb5efc560e09052cd183b468772cf7f799f81194
Signed-off-by: pcamaril <pcamaril@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0c3b847044d522f55dfd8262afa7c161d5bd5dd3
|
|
This allows a user creating MPLS tunnel through the bin_api to add a name tag. This is useful
to correlate the Tunnel with its use-case. Also useful if the user needs to recover the MPLS
Tunnel after a restart (mark-sweep).
Type: feature
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: Idc080a63810a176ab090a2678a73d2cf9f7b523f
|
|
Use consistent API types.
Change vl_api_ipsec_proto_t to iana values:
ESP 50,
AH 51,
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I2becefb343246e0233f290fefbfdd172d8237325
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: docs
Change-Id: I311301328fb5e47ba1c3caaff18431738bbd1233
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The port registry uses host byte order for while the session API
uses network order. In a single place the conversion was missing.
Type: fix
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: Ic8cfe2cb4e0711b3e0614060ff6b4f2fe4ed4391
|
|
Use consistent API types.
Type: fix
Change-Id: I7ac7cd00606101864fa3422e7b9ea2f1143665dd
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
When we get ip-neigbor information using VPP API,
it's age can be very useful information.
This patch adds age entry to API and neighbor type
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I822e70ba7a2bdd85fec40930cfc9341ab71f7cb3
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I01441e958517e31260e67c8caea5f75d684b2711
|
|
Building applications using the VPP bin_api outside of the VPP tree is broken, missing these includes.
Type: fix
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: Ibcb2fea0f5740a73b9577392aa54ac3c93c8d2b5
|
|
This path flag FIB_API_PATH_TYPE_INTERFACE_RX is not copied to the client bin_api.
Type: fix
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: I612044d2f564c852f83fceb63ce750a6330e1365
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iaa4f9b0ec31a58f7406774f73e1a089bfcf4ac30
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ib752a3425c076eb53bc5255a48039cbb74b1fcce
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
External IKE daemons need to be able to flag an SA as inbound (just as
the included ike plugin does). This commit adds this flag to the API.
This change is backward bug-compatible as not setting the flag (old
clients) continues to mean all SAs are created as outbound and fib nodes
are created for them. The addition of this flag inhibits this forwarding
node creation as well as properly flagging the SA as inbound.
Ticket: VPP-1845
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: I195e32c430e51155fac2d9f33671e06ef42a3f7f
|
|
Type: feature
Change-Id: I775f53531972447ebae0d69b9e2dfeee84d115e5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Add new flow type IP4_N_TUPLE_TAGGED and IP6_N_TUPLE_TAGGED
for vlan tag sensitive flows
The original IP4_N_TUPLE and IP6_N_TUPLE will not match VLAN anymore
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ie511e9a64126440fe81f29665a56ca060061662d
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia6095a91904693225e53a85f35dfebf0757b3971
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ic428e35141724b47a944211b4d95c3e41796c81e
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|