Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
If an SA protecting an IPv6 tunnel interface has UDP encapsulation
enabled, the code in esp_encrypt_inline() inserts a UDP header but does
not set the next protocol or the UDP payload length, so the peer that
receives the packet drops it. Set the next protocol field and the UDP
payload length correctly.
The port(s) for UDP encapsulation of IPsec was not registered for IPv6.
Add this registration for IPv6 SAs when UDP encapsulation is enabled.
Add punt handling for IPv6 IKE on NAT-T port.
Add registration of linux-cp for the new punt reason.
Add unit tests of IPv6 ESP w/ UDP encapsulation on tun protect
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: Ibb28e423ab8c7bcea2c1964782a788a0f4da5268
|
|
Type: improvement
plus the addition of the 'thorttle' counter of IP6.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic845247a9f3288caa755c33e79ae2eb6d2029d09
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3d36faa60075658fd59eb5bbe16efcb48664691b
|
|
Type: improvement
Currently, once an adjacency is stacked on a FIB entry via
adj_midchain_delegate_stack(), "midchain delegate" is created for the
adjacency and the FIB index is stored there. And all further calls to
adj_midchain_delegate_stack() even passing another FIB index will cause
the function to still use the stored one. In other words, there is
currently no way to stack an adjacency on another FIB index if "midchain
delegate" already exists for it.
Being able to stack on another FIB index is needed for the wireguard
plugin. As per the protocol, peers can roam between different external
endpoints. When an authenticated packet is received and it was sent from
a different endpoint than currently stored, the endpoint needs to be
updated and all futher communication needs to happen with that endpoint.
Thus, the corresponding to that peer adjacencies need to be stacked on
the FIB entry that corresponds to the new endpoint.
With this change, add adj_midchain_delegate_remove() that removes
"midchain delegate". When stacking on another FIB entry is needed,
existing "midchain delegate" can be removed and then, a new one created
with a new FIB index via adj_midchain_delegate_stack().
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ibc1c99b248a5ef8ef64867f39f494fab627a1741
|
|
like tcp punt
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: I894a881cec1888b392d26fdfb385f97c31113ef1
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I9d25f5459ab70d9cf8556e44cfddfd7029e5b540
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I822ead1495edb96ee62e53dc5920aa6c565e3621
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ica7de5a493389c6f53b7cf04e06939473a63d2b9
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ifda8ca8d26912c750a77d2ca889e1638ca83d85a
|
|
Type: fix
API and internal flags do not match 1:1.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I0f4e53b2e071d1c9fffd1b97bf28b4789887b032
|
|
Type: improvement
This method allows the assignment of a severity to the error.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id1a414a88018390d03bd6b16bd048a98903bab5a
|
|
Type: improvement
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8907fecde6d48f5362f0f91372d5a9a1bba6f931
|
|
Type: feature
stats of the like from:
https://datatracker.ietf.org/doc/html/draft-ietf-rtgwg-arp-yang-model-03#section-4
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Icb1bf4f6f7e6ccc2f44b0008d4774b61cae96184
|
|
Change-Id: I42a138628b06a412b8fce7fb4fc500caf9057169
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: I2f3163a7a158afa8e2debc6f545c3d1a2a12ac1d
Type: fix
Fixes: 3414977152ae6362277158dc732e6b9958a6e618
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: I6bed66f740b34673a4883eda1c7f7310c57e131b
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
In set_hw_interface_change_rx_mode(), when vnet_hw_if_set_rx_queue_mode()
returns an error it actually returns success. This has been changed to
return a clib_error_return() value.
Type: fix
Change-Id: Iba39c875d9e15463cb6492d8a966234560a1f522
Signed-off-by: Wayne Morrison <wmorrison@netgate.com>
|
|
This patch fixes followig coverity issues:
CID 274739 Out-of-bounds read
CID 274746 Out-of-bounds access
CID 274748 Out-of-bounds read
Type: fix
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I9bb6741f100a9414a5a15278ffa49b31ccd7994f
|
|
Fix parse problem with per-prefix settings (e.g. valid-lifetime)
in ip6 ra.
Type: fix
Signed-off-by: me@hrntknr.net
Change-Id: I2a00bf5b9621ebc16211227d70e376fc2f61bae1
|
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I39e3e007da2b99321bebf3e1c1ebb1d87547f532
|
|
Type: fix
Receive router solicitation in pop vlan interface, it will cause copy mac address to wrong buffer current_data and can not reply the solicitation right
Signed-off-by: liangrq <liangrq@efly.cc>
Change-Id: Ic40a5a47a52c8187aaf6c6854df761529e6f24d9
|
|
format_base10 reads 64b but is fed 32b values at the callsite; change
to u64 consistently. The function has only one call site in
interface/monitor.c which has a few additional bugs (spurious
character, and ambiguous 'bits' versus 'bytes' in the output).
Type: improvement
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I360f0d439cc13c09bd3f53db8184bd12ad4bc2e9
|
|
With thousands of UDP sessions,
Sometimes VPP needs more time to grab the MQ lock for a session.
So increased tries from 5 to 75.
Type: fix
Signed-off-by: Radha krishna Saragadam <krishna_srk2003@yahoo.com>
Change-Id: Id8b877255aedcdcf206e9d0869fe5246645d76e7
|
|
With this patch fast path for ipv6 policy lookup is enabled.
This impelentation scales and outperforms original implementation when
the number of defined flows is higher thatn 100k.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I9364b5b8db4fc708790d48c538add272c7cea400
|
|
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I5ecfb242e5905c9bd8ce19cd9ab6efd657ee14d4
|
|
0 is not NULL (at least not in all cases), passing 0 into a variadic
function in a place where the consumer reads it as pointer might
leave parts of the pointer uninitilized and hence filled with random
data.
It seems that this used to work with gcc, but clang seems to treat the
0 in those places as a 32bit integer.
Type: fix
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: I37d975eef5a1ad98fbfb65ebe47d73458aafea00
|
|
Type: feature
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: I2d3a0211abfee3501d3d77c80da20e67e1e9e133
|
|
classify hash used to be stored as u64 in buffer metadata, use 32 bits
instead:
- on almost all our supported arch (x86 and arm64) we use crc32c
intrinsics to compute the final hash: we really get a 32-bits hash
- the hash itself is used to compute a 32-bits bucket index by masking
upper bits: we always discard the higher 32-bits
- this allows to increase the l2 classify buffer metadata padding such
as it does not overlap with the ip fib_index metadata anymore. This
overlap is an issue when using the 'set metadata' action in the ip
ACL node which updates both fields
Type: fix
Change-Id: I5d35bdae97b96c3cae534e859b63950fb500ff50
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: Iff5e85952273526d5c9d9e7e73bd2b6c15bcd7f6
|
|
This patch adds support for the infrastructure
required to support SRv6 Path Tracing defined in
https://datatracker.ietf.org/doc/draft-filsfils-spring-path-tracing/
Type: feature
Change-Id: If3b09d6216490a60dd5a816577477b6399abc124
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
|
|
This patch updates the "show ipsec spd" cli to display
policies maintained by fast path bihash table.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I58b9f92f3132dc9809b50786dc912e09c4b84d81
|
|
Parser can be configured from the level of startup.conf file:
fast path can be enabled and disabled.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Ifab83ddcb75bc44c8165e7fa87a1a56d047732a1
|
|
This patch adds matching functionality for spd fast path
policy matching. Fast path matching has been introduced
for outbound traffic only.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I03d5edf7d7fbc03bf3e6edbe33cb15bc965f9d4e
|
|
This patch introduces ipsec_output.h file. Matching implementation is
moved there. The reason behind is the possibility of unit testing
matching mechanism. Therefore we need to have functions that are in
scope of our intrest there and since these are inline their
implementation needs to be moved to the header file as well.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: Id7c605375d1f3be146abf96ef70d336a5d156444
|
|
This patch introduces functions to add and delete fast path
policies.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I3f1f1323148080c9dac531fbe9fa33bad4efe814
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0963bae4b56b08c0a9ab4ee1f2738013217e1fb7
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Idc0fdebfea29c241d8a36128241ccec03eace5fd
|
|
This patch introdcues basic types supporting fast path lookup.
Fast path performs policy matching with use of hash lookup
(particularly bihash tries has been used for that purpose). Fast path
lookup addresses situation where huge number of policies is created
(~100k or more). In such scenario adding/removing a policy
and policy matching is not efficient and poorly scales (for example
adding 500k policies takes a few hours. Also lookup time
increases significantly). With fast path adding and matching up to
1M flows scales up linearly (adding 1M of policies takes about 150s
on the test machine vs many hours in case of original implementation,
also matching time is significantly improved). Fast path will not
deal well with a huge number of policies that are spanning large
ip/port ranges. Large range will be masked out almost entirely leaving
only a few bits for calculating the hash key. Such keys will tend to
gather much more policies than other keys and hash will match most of
the packets anihilating advantages of hashing. Having said that
we also think that it is not the real life scenario.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I600dae5111a37768ed4b23aa18426e66bbf7b529
|
|
Currently 0 has been used as the wildcard representing ANY type of
protocol. However 0 is valid value of ip protocol (HOPOPT) and therefore
it should not be used as a wildcard. Instead 255 is used which is
guaranteed by IANA to be reserved and not used as a protocol id.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I2320bae6fe380cb999dc5a9187beb68fda2d31eb
|
|
Type: fix
Added stats for success and failure cases
Fixed Custom app behaviors for the error / drop cases
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: Id6e981c7be5c5b3cee5af2df505666d5558da470
|
|
Type: improvement
Change-Id: I85c73cb940d81d0b249eda0d57de135bcd798418
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: Ic949e3136a7cf27011d098a50e91920f83226ea9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
We were not allocating space for the
variable length payload in the response
message.
Type: fix
Change-Id: I345102f4555f66c5632ab0882ca1dd178e98eb7b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Adding support for the SRv6 TEF (Timestamp, Encapsulation and Forward) behavior defined in
draft-filsfils-spring-path-tracing (https://datatracker.ietf.org/doc/draft-filsfils-spring-path-tracing/).
Type: feature
Change-Id: I7f38b593147daf8d27af9c983448cf82947e5bed
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I646ac946d0b07929dfdd1966a4f4a3b697768040
|
|
The flow_report_process_send() function always allocates a frame.
However, when no template_send is needed, template_bi is ~0.
When this happens, no vectors are placed in the frame. When
the frame is then "put", a check for n_vectors == 0 prevents
the frame from actually being placed back on the free list.
Fix that by using a direct call to vlib_frame_free() when
there are no frame vctors.
Type: fix
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I936b5cea4cb3c358247c3d2e1a77d034a322ea76
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3c573641bd95fe899823b66f6c59a2525a18d293
|
|
When failing to match an ip address, we should not reset the ip address
that could have been initialized by a previous match.
Type: fix
Change-Id: I026766391eb3eb8230f75f66bf4b681e774741d9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
*Buffer leaks and corruptions during internal errors, either overriding
or missing to add the buffer to the list
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I1ead1eca1cde10a36d60dbfcfe36ca6375690b03
|
|
Type: fix
Pace the main thread activity for reassembly timeouts, to avoid barrier syncs
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: Iebe9a38d2a7a6471afa6621f12bb545668dc8384
|