Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iba914ac69585e89f174f09e74ae716df1b080c59
|
|
Type: refactor
Change-Id: I3f561818bc7c221f676477a52c7c7781624c185a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: 587f9130424fd451e4ba823240d02f655fb197d1
Change-Id: I230993a54c84e22e324de2a8defeda83c517d733
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id8673cff699cfdc1ac68797b9ab5cdf6f6b578a3
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6455f2d38a2927f16fd4cb0e26b8560a2357cebe
|
|
Implements CLI to show the IPv6 address used as source address for the SRv6 encapsulation.
Type: feature
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: Ia442d9345a7793836148d890745fc5dc92729b6f
|
|
When a 'del' is used to delete a classify table, only the
mask is needed to locate the table. Any match vector is
unneeded. The tests failed to notice this, but if the
test is run by hand in vppctl, it issues a parse error.
Fix the test so that it doesn't supply irrelevant data.
Fix the CLI processing to read always complete newline
terminated line of input instead. This allows unneeded
CLI parameters to be ignored. It also necessitated
fixing a trace test which had then erroneously split
a single CLI command over multiple lines.
While in the area, fix a latent bug on table matching
where a test for compatible mask vector sizes were
not matching impedance properly (byte vs ux32x4).
Type: fix
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I1177ab1dd417f3d11f30eecbaa2b0fb1015c3ab5
|
|
Quite a noticeable amount of memory. Recoded ra event tx and rx fns in
the usual manner, which terminated the leaks.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I486d348456b465ad3940a280d4cf489e8dd655a5
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I21bda0c46406aff54ad8fe5e44491e8e332de170
|
|
Fifo chunk ooo lookup data structures are private (not allocated on
segment heap) and should only be initialized by transport protocols that
require out-of-order enqueues/dequeues (like tcp).
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iaa15d6850385bf903cc501c54c2752e8e811449e
|
|
First step towards deprecating the use of binary api's segment for mq
allocation.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9d3d17e4d406575d64e0426bb65465130a84980a
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
A plugin can set the speed on a host interface making it possible for
host applications to be aware of the actual interface speed, not the
one that the driver reports by default.
With this change, add a function to set speed on a host interface.
Type: feature
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I259a52b736022bdd805e8d92dcd1bfd5c58f6f96
|
|
ipsec_{crypto,integ}_alg_t are packed and smaller than u32. Callers are
using those enums so unformat functions should too instead of u32 to
not overflow the stack.
Type: fix
Change-Id: Ifc86366f1928ca6352f06f390a88ac64668289d5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I840741dfe040718b682935cdbcb0ba958d45a591
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Thanks to Shaligram Prakash <Shaligram.Prakash@enea.com> for reporting.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I135d23957a0dbb56a30994dfe3a316efd1eabad1
|
|
Type: feature
Add a function to adjust the link state of the host side of a tap
interface. If an application (e.g. route protocol daemons) running on
the host uses netlink to monitor interface state, a plugin
could use this function to communicate a loss of connectivity
to the application by making the interface appear to go down.
Requires a somewhat recent kernel. E.g. it does not have any effect
on CentOS 7 but it works on CentOS 8.
Change-Id: I677ee7889d2eb142e2395bea98f0b4d7e7e7f810
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Change-Id: Iaf98a60e37dd28828feca365b8fdc5d2f7ae6935
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: docs
Change-Id: I96d5cdb41bd938f06d2d72f2625bf1b3d2c5b1b4
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Improves compile time....
Type: improvement
Change-Id: I310a2e55e5e488a953d65fd065f7795a43d2e9a7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When removing an interface we must reset all per-interface per-feature
arc data to ensure we do not get wrong feature arc config data when the
sw_if_index is recycled.
Type: fix
Change-Id: I8c9d850d7c62b7b77193da4258ab5fb9bdda85a6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I835b61f0b88a7324b09d82400debd78ad8b95401
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9e6b5e245533c9ea7bb8dc4f784a31fcb0da88bd
|
|
Type: feature
- use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc
during IPSEC tunnel mode encap.
- use DSCP value to have fixed encap value.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I58fb0e05f62eae45818c23e8e148ff6758ba463a
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic4072fbc182fff38a28b415be0bb16f0559a4064
|
|
Type: fix
Change-Id: I53cb96950f8658d7159fb0bd8ecfa50b6977e5af
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Id1801519638a9b97175847d7ed58824fb83433d6
|
|
Type: fix
Fixes: 2e6f624f1f82ae0351dd05ad5d930d6876105519
Change-Id: I24a9822d1968a134c7e41221f48296cc8a67dd91
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id6f7b2b969eb50eb7611e4e9ca77b7ef0e0519a1
|
|
Type: improvement
packet buffering is common code to tun/tap/virtio.
Change-Id: I59a339f268a28a0c32756e52d10d1ed6b207db42
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
GRO is common to tap/tun/virtio devices. Hence move to
common place.
Change-Id: Ibb099f3a80f493ddb934df6bb7640f7c9c370fd5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icdeddeffd95492ca34f37e1904b1f5f6d150a6bc
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I69e912ddf64d8ec89f8d93e02a201781b99de0bd
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I015443caefb13306858b4ccadeb0b979ea87299a
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: If7e22978a6b65f5b68ccb2bd97b5e0fba167b3bf
|
|
best source
Type: improvement
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Change-Id: Iaa91cbc7eba94f4ffbdc249ecdb49770bd2ae916
|
|
This patch removes esp-encrypt-pending and esp-decrypt-pending
graph nodes from ipsec data-path.
Type: improvement
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: Icd90837eafdbfbfdf348681dcafb872593978980
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I03f923053499f219035c9b7b6640fc575568d474
|
|
Also simplify condition for detecting unintended timer pops.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8b120dfc2d16e40ee865240dbc9667708cd1c808
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iae5045686c62ad9279be350cffeaa41b8297d179
|
|
When GSO is enabled, vhost clears the checksum field prior to transmitting
the packet. Some newer kernel version does not like that and complains
about checksum error. This was seen with ip6 traffic.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I7c6f2a6148f4a30107bfa8b078f5990e64300cf1
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9461b6539c504ca844c25d04abe95929f842e4e9
|
|
Type: fix
Fixes: 03b76a20c569b8275beb8783691300a7d66b54a4
Change-Id: Ife788974cb7b2c35f40a017dd195dc2f7ee797b4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: Ibe305b96f04ffdc95ddb07d144dc00119ae69a07
|
|
If VPP is started in interactive mode, instead of sending logs to syslog
server we print them directly to stderr.
Output is colorized, but that can be turned off with unix { nocolor }
Type: improvement
Change-Id: I9a0f0803e4cba2849a6efa0b6a86b9614ed33ced
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iae9fe35cfbce4c675fa25e0800c0f4629a83e012
|
|
Type: fix
This is not an API change, it's the same values, just a different named
type.
also use VppEnum values in tests
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3a18b529514f3cc9467ae4e8ac3e88d067fc776b
|
|
Type: improvement
virtio interfaces support packet coalescing and buffering which
depends on timer expiry to flush the stored packets periodically.
virtio input node checks timer expiry and schedules tx queue
accordingly. In poll mode, timer expiry is handled naturally,
as input node runs periodically. In interrupt mode, virtio
input node depends on the interrupts send from backend.
Stored packets could starve, if there would not be interrupts
to input node.
This patch implements a process node which periodically
sends interrupt to virtio input node given coalescing or buffering
feature is enabled on an interface.
Change-Id: Ic38f749f74b001073d4d0579dca149d0a4cea039
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
this save the cache miss on the protect structure.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I867d5e49df5edfd6b368f17a34747f32840080e4
|