summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2017-10-03tcp: updates to connection closing procedure (VPP-996)Florin Coras4-17/+63
- add separate TIME_WAIT time constant - fix output node for TIME_WAIT acks - ensure snd_nxt is snd_una_max after retransmitting fin - debugging improvements Change-Id: Ic947153346979853f2526824b229126e47aead86 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-03Repair vlib API socket serverDave Barach10-25/+58
- Teach vpp_api_test to send/receive API messages over sockets - Add memfd-based shared memory - Add api messages to create memfd-based shared memory segments - vpp_api_test supports both socket and shared memory segment connections - vpp_api_test pivot from socket to shared memory API messaging - add socket client support to libvlibclient.so - dead client reaper sends ping messages, container-friendly - dead client reaper falls back to kill (<pid>, 0) live checking if e.g. a python app goes silent for tens of seconds - handle ping messages in python client support code - teach show api ring about pairwise shared-memory segments - fix ip probing of already resolved destinations (VPP-998) We'll need this work to implement proper host-stack client isolation Change-Id: Ic23b65f75c854d0393d9a2e9d6b122a9551be769 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-10-03Propagate duplicate IF addr add/del error up to API.Jon Loeliger3-8/+30
Identify and complain when the same IP prefix is assigned to two different SW interfaces: vpp# set int ip address TenGigabitEthernet6/0/0 1.2.3.4/32 vpp# set int ip address TenGigabitEthernet6/0/1 1.2.3.4/32 set interface ip address: Prefix 1.2.3.4/32 already found on interface TenGigabitEthernet6/0/0 Change-Id: I1aee1b6a7ddd00d3109a53d8e1b6ce97bf45e372 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-10-02L2-FIB:add mac learn events testEyal Bari1-56/+49
fixes an issue where events were not sent if BD doesn't enable mac aging Change-Id: Iddc53cb5c45e560633e6c5cff2731dccfc70ad5b Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-28cdp/lldp: punt for no bufferSteven2-0/+6
When making a call to vlib_packet_template_get_packet(), it is possible to get back a NULL if the system runs out of buffer. This can happen when there is buffer leaks. But don't crash just because we run out of buffers, just punt. Change-Id: Ie90ea41f3dda6e583d48959cbd18ff124158d7f8 Signed-off-by: Steven <sluong@cisco.com>
2017-09-28tun/tap: Bad packets sent to kernel via tun/tap interfaceSteven2-22/+29
It was observed that under heavy traffic, VPP accidentally sent traffic with the wrong source and destination to the tun/tap interface. Traffic appears to be sent to the wrong direction. This problem is only seen when worker thread is configured. When worker thread is used, TX and RX may reside in different core. Yet both TX and RX threads are sharing the same global variable, namely iovecs without any mutex or memory barrier protection. This creates a race condition when heavy traffic is blasted to VPP, like 1000 pps. We could create a mutex or memory barrier to ensure atomic memory access. But why bother? It is a lot cheaper to just decouple the iovecs such that TX and RX have their own iovecs. Change-Id: I86a5a19bd8de54d54f32e1f0845bae6a81bbf686 Signed-off-by: Steven <sluong@cisco.com>
2017-09-27LISP: add API handlers for set/get transport protocolFilip Tehlar3-0/+62
Change-Id: Ib675164c475edcdbe3013df7b847adf5e050c53f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-27VLAN support on host(af-packet) interface.Akshaya N1-3/+26
On host interface if a VLAN tagged packet is received, linux kernel removes the VLAN header from packet byte stream and adds metadata in tpacket2_hdr. This patch explicitely checks for the presense of VLAN metadata and adds it in VPP packet. Change-Id: I0ba35c1e98dbc008ce18d032f22f2717d610c1aa Signed-off-by: Akshaya N <akshaya@rtbrick.com>
2017-09-27Various fixes for issues found by Coverity (VPP-972)Chris Luke2-1/+12
174267: Revisit this string termination issue 174816: Add check for NULL when trace is enabled 177211: Add notation that mutex is not required here 177117: Added check for log2_page_size == 0 and returns an error if so 163697,163698: Added missing sw_if_index validation Change-Id: I5a76fcf6505c785bfb3269e353360031c6a0fd0f Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-26tcp: update snd_nxt after congestion recoveryFlorin Coras2-9/+7
Change-Id: I2cf4c4850b9c3c093a7dce0cec89b9f710f69393 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-26Add thread-safe event signaller, use RPC where requiredDave Barach1-2/+2
Update ping code to use the new function Change-Id: Ieb753b23f8402cbe5667c22747896784c8ece937 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-09-25tcp: do not sample rtt for retransmitted segmentsFlorin Coras3-81/+100
Change-Id: I365c31607332a944ef498369881332b515894ed7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-25Fix sending GARP/NA on Bonded Interface Active/Backup Link Up/DownJohn Lo2-45/+2
For bonded interface in Active/Backup mode (mode 1), we need to send a GARP/NA packet, if IP address is present, on slave link state change to up or down to help with route convergence. The callback from DPDK happens in a separate thread so we need to make sure RPC call is used to signal the send_garp_na process in the main thread. Also need to fix DPDK polling so the slave links are not polled. Change-Id: If5fd8ea2d28c54dd28726ac403ad366386ce9651 Signed-off-by: John Lo <loj@cisco.com>
2017-09-22vhost-user: fix link-up statusYoann Desmouceaux1-1/+1
When changing the admin state of a vhost-user interface, do not put it in link-up mode if the interface is not actually ready. Change-Id: Idbc631a7126efa79d199909f9e7656d21bd412ca Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-22IP-MAC,ND:wildcard events,fix sending multiple eventsEyal Bari4-25/+70
wildcard ND events publisher was sending the last event mutiple times Change-Id: I6c30f2de03fa825e79df9005a3cfaaf68ff7ea2f Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-20session: store tep port in net orderFlorin Coras4-14/+14
Change-Id: Ie3a99f09f44ec081d9b88a213bdb8d987fb462de Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-20LISP: add debug cli for neighbor discoveryFilip Tehlar4-6/+71
Change-Id: Ib5d335d6130617d6135615c6c8fa8deaac971331 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-20TCP: fix "tcp src-address" command with IPv6Yoann Desmouceaux1-1/+1
When given a single IPv6 address, the "tcp src-address" command incorrectly infers the end of the range by copying sizeof(ip4_address_t) bytes from the given address. Change-Id: I100d5c6674d3a3980b8c018588988bdd32ff7269 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2017-09-20tcp: add option to punt trafficPierre Pfister5-30/+99
Until now, if the stack didn't find a connection for a packet, it sent back a reset. With the punt option enabled, packets are now enqueued to error-punt where they can be handed off to the host os. Change-Id: I12dea8694b8bd24c92b0d601412928aa7b8046cb Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-09-20Fix DHCP client so it works for worker threadsJohn Lo1-2/+14
Fix dhcp_client_for_us() function to utilize rpc_call_main_thread to call vlib_process_signal_event() to ensure proper handling irrespective of it being called in main thread or worker thread. Added ASSERT to vlib_process_sinal.. path to make sure it is called in main thread. Change-Id: I4109cc049d8e4225d896ce492ce201011dc9c911 Signed-off-by: John Lo <loj@cisco.com>
2017-09-20Add ip6-local feature arcPierre Pfister4-8/+101
ip4-local feature arc existed but not ip6-local one. This patch also adds node name to the 'show ip local' command and fixes a minor include issue in vnet/ip/ip4.h file. Change-Id: I9bb8a7159917d58f89afcce974680de20d946a70 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2017-09-19session/tcp: improve preallocated segment handlingFlorin Coras10-123/+190
- add preallocated segment flag - don't remove pre-allocated segments except if application detaches - when preallocating fifos in multiple segments, completely fill a segment before moving to the next - detach server application from segment-managers when deleting app - batch syn/syn-ack/fin (re)transmissions - loosen up close-wait and time-wait times Change-Id: I412f53ce601cc83b3acc26aeffd7fa2d52d73b03 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-19Treat label=0 as an invalid next-hop-via-labelNeale Ranns1-1/+7
Change-Id: I831226111d26f5c8a795e0773e23fddcddfb1613 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-19LISP: support for neighbor discoveryFilip Tehlar8-110/+384
Change-Id: I0f1a051dd3b5786dc7c457bc6fc7ce4fcd0f530c Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-19Set RX sw_if_index on decrypted routed IPsec buffersMatthew Smith2-0/+3
For routed IPsec, set the RX sw_if_index on inbound packets to the index of the IPsec interface. When a packet is decrypted into a new buffer, bring along the RX sw_if_index of the encrypted packet to the new buffer. Change-Id: I093e9d37def2082c8d2f1deb96b1c5b97126e023 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2017-09-19Fix MPLS table create CLINeale Ranns1-7/+2
Change-Id: I1f3c0f879f636e587aa518c41e5ad99af65129a7 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-19Implement VXLAN encap tx checksum offloadJohn Lo1-39/+108
Checksum offload is implemented in VXLAN encap over both IPv4 and IPv6. It is enabled, however, only for VXLAN over IPv6 because UDP checksum is needed only for IPv6 and optional for IPv4. Change-Id: Ib879f4f6da7346ba5e079d321c1dfd630f5058b8 Signed-off-by: John Lo <loj@cisco.com>
2017-09-19Remove associated lisp-gpe entries when removing lisp local mapping.Alberto Rodriguez-Natal2-7/+76
Change-Id: Ifda4d22c9d1de210165932a0996f75cc8428ae7a Signed-off-by: Alberto Rodriguez-Natal <natal@cisco.com>
2017-09-18Fixes for issues Coverity has reported (VPP-972)Chris Luke4-39/+13
177117: fstat() returns -1 on error; the code is checking for any positive value instead 175142: final return could never be reached; simple refactoring 175235,175236: Warning suppressed with an explicit cast to (void) 174817: Final return couldn't be reached; is is_in_order is 0 then 'rv' is already returned above 172095,172093: If is_is_set does not get set to 1, then return 0 has already been invoked 174405: Re-kill this (nothing sets rv) 171136: Looks like a cmd line flag to set test_bytes was missing; added it, and refactored the argc/argv processing to avoid two other potential segv's 176813: Add range checking for term width/height. First stab at a reasonable range is 1-512 for both. 175350: Fix implicit casting in shift operation 174272: Not a c+p error; try using a coverity annotation to ignore it 174273,175320: Annotated FORWARD_NULL Change-Id: I58d0f860fc2209f59f8d1b6b344d631b8d429ace Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-18L2BD,ARP-TERM:fix arp query report mechanism+testEyal Bari2-25/+61
previous mechanism was emitting duplicates of last event, when handling multiple arp queries. tests: * arp events sent for graps * duplicate suppression * verify no events when disabled Change-Id: I84adc23980d43b819261eccf02ec056b5cec61df Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-09-15dpdk: cli to check for buffer leakageFlorin Coras2-4/+7
Use buffer pre_data and existing buffer trace trajectory code to find out dpdk buffer leakages. Change-Id: I26a5d8bd2f23d01cb6070ffc3ddcc6d3d863b575 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-15vppinfra: add clib_mem_vm_ext_alloc functionDamjan Marion1-2/+2
Change-Id: Iff33694fc42cc3bcc73cf1372339053a6365039c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-09-15Update of free text tag patch for BDJerome Tollet3-4/+7
Change-Id: Ia886ff2bfa2cf33ffbaa35ec89494d4300ec2769 Signed-off-by: Jerome Tollet <jtollet@cisco.com>
2017-09-14Stats refactorKeith Burns (alagalah)1-2/+74
- added per-interface simple/combined counters - refactored fib/nbr API to use common registration scheme - refactored "want_stats" and "want_interface" to use per interface registration scheme - fixed issues with SEGV when client disconnects abruptly. Change-Id: Ib701bd8e4105d03548259217bfc809bd738b7c72 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2017-09-13gpe: initialize fib index for native forward entriesFlorin Coras1-4/+6
Change-Id: I972e6e645c3ae9cba4bb2b4e32c0272dfd67e87b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-13Add a name to the creation of an IP and MPLS tableNeale Ranns17-70/+208
Change-Id: I4b4648831551519b2ffb6f93255d28a4b8726c22 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-12tcp: horizontal scaling improvmentsFlorin Coras9-205/+328
- do not scale syn-ack window - fix the max number of outstanding syns in builtin client - fix syn-sent ack validation to use modulo arithmetic - improve retransmit timer handler - fix output buffer allocator leakeage - improved debugging Change-Id: Iac3bc0eadf7d0b494a93e22d210a3153b61b3273 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-11replace uint32_t with u32Neale Ranns6-12/+12
Change-Id: I6cab79c266837a8731adcf78c9e093dfa6be0ead Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-11arp/glean: fix hash computationFlorin Coras1-1/+2
Change-Id: Ifef8a9328bb865f6ddb041bafe3699153f89755a Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-09-11FIB table add/delete APINeale Ranns49-487/+1254
part 2; - this adds the code to create an IP and MPLS table via the API. - but the enforcement that the table must be created before it is used is still missing, this is so that CSIT can pass. Change-Id: Id124d884ade6cb7da947225200e3bb193454c555 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-09-09move unix_file_* code to vppinfraDamjan Marion10-68/+65
This will allow us to use this code in client libraries without vlib. Change-Id: I8557b752496841ba588aa36b6082cbe2cd1867fe Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-09-08Initialize ip4_reass_lock of map_main to zero (VPP-975)dongjuan1-0/+2
Change-Id: I0f58100a944e36f5b530101178303d4595b3207f Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
2017-09-08vlib: move linux-specific code to vlib/linuxDamjan Marion1-0/+1
Change-Id: Id79d2c2be7a98e15416a537c890a8f2dd6d4464d Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-09-08PUNT: Missing include for readv()Marco Varlese1-0/+1
The missing header include was generating a compile-time error; src/vnet/ip/punt.c:460:10: error: implicit declaration of function 'readv' Change-Id: I3f74294e7824ea3602b8d416c86fdada1aac1906 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-09-08Fixes for issues reported by Coverity (VPP-972)Chris Luke1-1/+10
Change-Id: I25238debb7081b4467aec4620dfdef33fbef3295 Signed-off-by: Chris Luke <chrisy@flirble.org>
2017-09-07LISP: add neighbor discovery and CP protocol separation APIsFilip Tehlar2-0/+86
Change-Id: Ia2fc4621f0e199b0d02ac4d2104b54bdb49c14dd Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-07LISP: Add APIs for enable/disable xTR/P-ITR/P-ETR modesFilip Tehlar1-0/+60
Change-Id: Ieeb3b7eaabb568180320fe54d3eae2d26f3e4704 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-09-07Devices: Set interface rx-mode may cause SIGSEGV with nonexistent queueSteven3-3/+17
When I type in set interface rx-mode with a nonexistent queue, I got a crash with the following traceback. It looks like the vm is NULL when vlib_node_get_runtime is called. DBGvpp# sh int rx Thread 0 (vpp_main): node dpdk-input: TenGigabitEthernet5/0/0 queue 0 (polling) TenGigabitEthernet5/0/1 queue 0 (polling) TenGigabitEthernet7/0/0 queue 0 (polling) TenGigabitEthernet7/0/1 queue 0 (polling) node vhost-user-input: VirtualEthernet0/0/2 queue 0 (adaptive) DBGvpp# set interface rx-mode VirtualEthernet0/0/2 queue 1 polling Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault. 0x00007ffff6d4e0bc in vlib_node_get_runtime (vm=0x0, node_index=125) at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:92 92 vlib_node_t *n = vec_elt (nm->nodes, node_index); (gdb) where at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:92 at /home/sluong/vpp/build-data/../src/vlib/node_funcs.h:112 vnm=0x6f0fa0 <vnet_main>, hw_if_index=7, queue_id=1, mode=0x7fffb62099e8) at /home/sluong/vpp/build-data/../src/vnet/devices/devices.c:307 hw_if_index=7, queue_id=1, mode=VNET_HW_INTERFACE_RX_MODE_POLLING) at /home/sluong/vpp/build-data/../src/vnet/interface_cli.c:1192 vm=0x7ffff7b9d440 <vlib_global_main>, input=0x7fffb6209ef0, cmd=0x7fffb61d5d14) at /home/sluong/vpp/build-data/../src/vnet/interface_cli.c:1288 vm=0x7ffff7b9d440 <vlib_global_main>, cm=0x7ffff7b9d630 <vlib_global_main+496>, input=0x7fffb6209ef0, parent_command_index=18) at /home/sluong/vpp/build-data/../src/vlib/cli.c:588 vm=0x7ffff7b9d440 <vlib_global_main>, cm=0x7ffff7b9d630 <vlib_global_main+496>, input=0x7fffb6209ef0, parent_command_index=12) The fix is to add a check for vec_len(hw->input_node_thread_index_by_queue) and vec_len (hw->rx_mode_by_queue) to reject the command if the queue_id is out of bound. While at it, I notice inputting queue_id=-1 is being interpreted as all queues. An easy fix is to not overload the queue_id variable with -1 to mean something else. Change-Id: Id70ec3e7d06ccc67635e6d28ef53420bdac4a988 Signed-off-by: Steven <sluong@cisco.com>
2017-09-07Fix session connect_* api message handling.Dave Wallace3-46/+47
Change-Id: If7fd125989c90240de12953658d10007b9eb4f07 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-09-07Support for bridge domain free text tagJerome Tollet4-2/+66
Change-Id: I9a75fdafd0c1d87b6f071fda5b77ff5f6b79deb7 Signed-off-by: Jerome Tollet <jtollet@cisco.com>