summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2018-08-29Consolidate table->index conversion in fib-path CLI processingNeale Ranns3-36/+14
Change-Id: I221cebddc45efbfdec428b7df2af96e2aedff2dd Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 77eb9073b178e8d4375bf0ef274246586f018ddc)
2018-08-28Adjacency walks protected by 'walk in progress' flagNeale Ranns2-2/+12
Change-Id: I3281f65f7dec792d56de48afb39efcc2fed8578b Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 30d53645ded750db3cc84f6fb4a97df038b143a1)
2018-08-28MPLS: allow 16 as a valid output labelNeale Ranns1-1/+1
Change-Id: I7e6045514d58010258889cadd220b7efcef7c1b9 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 9514fab0423725fddcb0a4f5ec070ac8d2764ac8)
2018-08-22IPIP and SIXRD tunnels create API needs table-IDs not fib-indexesNeale Ranns8-58/+146
Change-Id: Ifaef196a24fa9b6924f2b9692318f69763cee5e1 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-17VPP-1392: VXLAN fails with IP fragmentationOle Troan4-2/+6
Not only is it wasteful to send all fragments back through ip4-lookup, but it doesn't work with tunnel mechanisms that don't have IP enabled on their payload side. Change-Id: Ic92d95982dddaa70969a2a6ea2f98edec7614425 Signed-off-by: Ole Troan <ot@cisco.com> (cherry picked from commit b3655e5592e3e8e48eb087632f3fa71915891a9f)
2018-08-07Fix dangling reference in l2fib_scan(...)Dave Barach1-0/+8
Deleting a bihash kvp frees the bucket's backing storage when the bucket reference count reaches zero. l2fib_scan MUST check for that condition, and stop scanning the bucket if it occurs. One of the L2 FIB extended "make test" vectors caused this issue 100% of the time. Change-Id: I250bcc4c1518e16042120fbc4032227a759a602e Signed-off-by: Dave Barach <dave@barachs.net> (cherry picked from commit 28374cada08df61180044e24cb758fa570e73c9d)
2018-08-03loop counter to prevent infiinte number of look ups per-packetNeale Ranns5-4/+100
Change-Id: I59235d11baac18785a4c90cdaf14e8f3ddf06dab Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-08-01fix 'sh vxlan tunnels'Neale Ranns1-15/+4
this receipe: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; only works if there is more data following the registered command name. So it is not so good for show commands... Change-Id: I54249865a44526ade4b40e2d6207138a2d056e40 Signed-off-by: Neale Ranns <neale.ranns@cisco.com> (cherry picked from commit 16be62e3846750b5b7921c0b4d6408477be434f7)
2018-07-30Reverse the logic of flagging malformed packet in fragmentation code to ↵Rajesh Saluja1-1/+1
allow padding Change-Id: I051c137ae18fd436a798a12a56a9d12f8eaa2e08 Signed-off-by: Rajesh Saluja <rajsaluj@cisco.com> (cherry picked from commit 1f895c9a40f446ca9f1b7803f350c70ebb3ad0fa)
2018-07-27Fix memory leak in processing of ICMPv6 RA event (VPP-1360)Juraj Sloboda1-1/+2
Change-Id: I7c3e5e91391b1c9b36e8ea8bacee9a107da1ae96 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-07-24fix vector index range checks (VPP-1353)Eyal Bari8-8/+8
Change-Id: I63c36644c9d93f2c3ec6606ca0205b407499de4e Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit cd30774fa9280736ffaea3e9a51948593e8eebc2) Signed-off-by: John Lo <loj@cisco.com>
2018-07-23QOS: mark/record fix feature ordering c-n-p errorNeale Ranns1-5/+5
vnet_feature_arc_init:215: feature node 'mpls-qos-mark' not found (after 'vlan-mpls-qos-record', arc 'mpls-input') vnet_feature_arc_init:215: feature node 'ip6-qos-mark' not found (after 'vlan-ip6-qos-record', arc 'ip6-multicast') ...etc... Change-Id: I22cb98d57e2480f5978fff315b77b9cbb6a9f9dd Signed-off-by: Neale Ranns <neale.ranns@cisco.com> (cherry picked from commit 8d753f906ecdd152af1e524919e99bd9ab45de46)
2018-07-23QoS: marking and recording for MPLS and VLANNeale Ranns3-18/+267
Change-Id: Icec79aa9039d5d7835d311fde0b7c1a0c76c9eb1 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 0809f6c0300f85cf5cf5d49df1aa8f1e2d080f6c)
2018-07-22Loopback tx: support multiple tx intfcs per frameDave Barach1-153/+197
Can happen if code bypasses the per-interface output node, and dispatches packets directly to the tx node. Switch to vlib_get_buffers(...) ... vlib_buffer_enqueue_to_next (...), quad/single loop coding pattern. Change-Id: Ic0e5d3b9748230f4e545a54186e6e64e7a782bb1 Signed-off-by: Dave Barach <dave@barachs.net> (cherry picked from commit 78451a6a660cd26a67d2284219f48878a2dfe2c3)
2018-07-19ip4-input and ip4-input-no-checksum should be siblingsNeale Ranns1-11/+1
each edge/arc from these nodes must be the same. Change-Id: Id5dace61bca0af71ad1df98583425226e81fd0de Signed-off-by: Neale Ranns <neale.ranns@cisco.com> (cherry picked from commit 8a03e4f97952d84e152f5b17d5325583604c4fd3)
2018-07-18qos mark/record: fix disable-sw_if_index range checkEyal Bari2-2/+2
Change-Id: I2abb3ceebae3a32cee9aa2a999bd47c37719d3ac Signed-off-by: Eyal Bari <ebari@cisco.com> Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com> (cherry picked from commit 07f3586c5a9868ccee381af528de39b373d7720a)
2018-07-18loopback:fix delete to check interface classEyal Bari1-13/+6
Change-Id: Ia563b279e85b5da93f79db5a2a4d9b8c04f5be99 Signed-off-by: Eyal Bari <ebari@cisco.com> (cherry picked from commit b52c034c7d53014e9d5c1dfc3501e9adfb0c6391)
2018-07-18VOM: support for pipesNeale Ranns2-10/+10
Change-Id: I5c381dfe2f926f94a34ee8ed8f1b9ec6038d5fe2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com> (cherry picked from commit 208c29aac523231af2420a95ba7e5d361698780b)
2018-07-15VPP-1341: fix loopback interface graph arcsDave Barach4-66/+175
Remove broken special case from l2_input.c:set_int_l2_mode(), which turns out to confuse the graph dispatch engine. The loopback TX function needs to push packets to either ethernet-input or to l2-input, based on bridge / BVI configuration. Rather than overloading a single graph arc - and making vain attempts to reconfigure it - create both arcs and use the correct one. Rewrote the loopback tx function as an idosyncratic multi-arch quad/single loop fn. Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-14Improve IP4 ARP and IP6 ND Events Notificationv18.10-rc0John Lo2-11/+32
For L2 ARP termination, use both brodcast ARP request and reply packets to provide MAC/IP binding events. For IP4/IP6 neighbor adress resolution, send resolution events if there is an address resolution attemp with a static neighbor entry where both IP and MAC matches. This allow probe of an IP neighbor with a static entry to confirm it is responding with a reply matching that of the static entry. Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f Signed-off-by: John Lo <loj@cisco.com>
2018-07-13VPP-1338: fix ipsec api coverity warningsDave Barach1-4/+3
Remove useless unsigned comparisions: "(unsigned) value < 0", correct a couple of incorrect limit checks. Change-Id: I9606c4057df157f770d59535457cb9df1cfd1f35 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-12srv6: fix pointers in quad loopsFrancois Clad1-6/+6
Change-Id: I51c4bcbd456d2e7ffbdeef9cc8c7703d1c88b52e Signed-off-by: Francois Clad <fclad@cisco.com>
2018-07-11session: push tx notifications only if neededFlorin Coras1-1/+6
VPP-1340 Change-Id: Ia3f2fc054dbfb2ba912a768c70466e7042024e32 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion36-58/+59
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11bridge-domain:fix no_flood countEyal Bari1-0/+3
no_flood count was not updated on removal might couase a negative insertion index when adding new members Change-Id: I2caf2c453dfef1a9f16fb8fa2e5af42b4e653a69 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-10VPP-1337: Dangling reference be gone!Dave Barach3-0/+6
Freeing the prefix and address vectors after signalling them from dhcpv6_client_node_fn to either the pd or iana report processes is absolutely wrong. The code has appeared to work by luck. This took three full days' worth of expert effort to root cause - in the context of an unrelated patch - and about one minute to fix. Change-Id: Ie589ab1a70ae83441ab4e8b6618a6d405741f53f Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-10FIB path dump: fix next-hop-table ID for recursive routesNeale Ranns2-2/+3
Change-Id: I57b4ebca29c0b185770373e8878f89a9bd13b742 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-09IGMP improvementsNeale Ranns8-24/+236
- Enable/Disable an interface for IGMP - improve logging - refactor common code - no orphaned timers - IGMP state changes in main thread only - Large groups split over multiple state-change reports - SSM range configuration API. - more tests Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-09vxlan:use bihash_16_8 for ipv4 lookupEyal Bari3-66/+76
Change-Id: I0d4630c88d6caacffcd073ebaa12766dfc893f70 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-09new pipe code does not use stdintsNeale Ranns1-2/+2
Change-Id: Idee565af852c7bb434b886fbf31c6e76315686c4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-08Fix IPsec intf tx node setup at intf creationMatthew Smith1-2/+2
When using a DPDK cryptodev with IPsec, sending outbound packets results in a crash on division by zero if using an algorithm not supported by the OpenSSL ESP nodes. This includes AES-GCM and MD5. At IPsec intf creation time, the next node at slot IPSEC_OUTPUT_NEXT_ESP_ENCRYPT for ipsec_if_tx_node_fn is set to the node named esp-encrypt. This is the OpenSSL ESP encrypt function. If DPDK cryptodevs are configured, dpdk-esp-encrypt is the correct next node. Change to setting the next node according to the value in ipsec_main.esp_encrypt_node_index. That value is set to esp-encrypt by default. If DPDK cryptodevs are configured it gets set to dpdk-esp-encrypt. Change-Id: I83896c76b975d74aead247a162c85eccca9575a8 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-08session/svm: fix coverity warningsFlorin Coras1-1/+5
Change-Id: Ic5daed1f6c23d9561a04e235dcbf257f190d066a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-07-08vhost: Add multi-versioning supportMohsin Kazmi6-1534/+1667
It also refactors the vhost code which was in one big file vhost-user.c. Receive side code is in vhost_user_input.c and Transmit side code is in vhost_user_output.c Change-Id: I1b539b5008685889723e228265786a2a3e9f3a78 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-07PipesNeale Ranns11-7/+1199
A pipe resembles a unix pipe. Each end of the pipe is a full VPP interface. pipes can be used for e.g. packet recirculation, inter-BD, etc. Change-Id: I185bb9fb43dd233ff45da63ac1b85ae2e1ceca16 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-05vxlan:use bihash_24_8 for ipv6 lookupEyal Bari3-116/+167
* added the fib index into the key * conform coding style for vxlan.h * added "show vxlan tunnel raw" command to dump bihash Change-Id: Icc96e41abb648e96de5b4605b035f68f9e20f8a9 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-04fix VPP-1312 Invalid UDP packet length in ipsecKlement Sekera1-1/+2
Change-Id: Ibfd0a2e7010e6e74c32244c538f60e0713bea03f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-07-04IP FIB dump - incorrect table-ID for deag pathsNeale Ranns1-1/+1
Change-Id: I383cfb662b4d2bf4f814e3eb9a1ce4d6bff7066d Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-04Remove unused members from ip4_fib_tNeale Ranns2-9/+3
Change-Id: I8b92652d512bad5d774c7862f9808c306bbeff18 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-04add 'src-lookup' keyword for FIB pathsNeale Ranns1-0/+4
Change-Id: I4554d1e94bd70ef5b3b0aaeb1a0fceaeb81c5f96 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-03tcp: update snd_una_max for retranmsitsFlorin Coras2-3/+8
Change-Id: I0573d0aff39581bba96e610228a10ae923a8ca06 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-07-02Fixing ip4-reassembly ip6-reassembly non feature node, next_node_index settingVijayabhaskar Katamreddy3-2/+2
Change-Id: Ib988d87e6758ffa31862096391f9f286b0797f2b Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-06-30tcp: fix single loop prefetchFlorin Coras2-3/+9
Also add single loop prefetch in session tx Change-Id: Ib2725a2552fcc1a65050d7a2eb10491a7b34db62 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-06-30session: send tx notification to appFlorin Coras3-188/+229
Does some session node cleanup as well Change-Id: Ifd52b07b28ba4dec1f6f729476decc76eb963837 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-06-29ipsec: fix VPP-1333 - crash in ipsec policy cliKlement Sekera1-0/+6
Change-Id: I843d094b6bbd1cefba82d6026174be005e66d510 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-29Removing the static keyword do_fragment routines, so that could be accessed ↵Vijayabhaskar Katamreddy2-3/+8
outside the ip_frag nodes Change-Id: I46d3d10fa763fcf7a579620ec7cf1b204a53bce8 Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-06-29IP4 Router Alert option handling for IGMPNeale Ranns4-14/+156
and a new ip4-options node, inserted between ip4-input and ip4-punt, that checks for IP-router-alert option + IGMP combination and sends the packet to the ip4-local. This is required because some IGMP packets are sent to the group address and not the all-routers address. All IGMP packets are sent with the router alert option. Change-Id: I01f478d4d98ac9f806e0bcba0f6da6e4e7d26e2a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-06-28vcl: move binary api and cfg to separate filesFlorin Coras3-4/+0
Change-Id: Ib88d703bb7d4b170059960b0688352c90c5fcc39 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-06-28vcl: refactor vcl sessionFlorin Coras1-12/+17
Change-Id: Idcba72fd84128547718dd32858e8c728925a6b1d Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-06-28reassembly: optimize bihash usageKlement Sekera2-45/+38
Change-Id: I19690db9996ecb8c5e86415d2fd3c7133ce698f8 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-06-28ip: vectorized ip checksumDamjan Marion2-69/+119
Change-Id: Ida678e6f31daa8decb18189da712a350336326e2 Signed-off-by: Damjan Marion <damarion@cisco.com>