Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I071e8d78ed9312ebf8e572bf01ece447ce1a1835
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Iabeda0d0615b0f6fe20dd00611cb4c594d90b7eb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Check whether an ARP src hw addr starts with 00:00:5e:00:01
before rejecting due to a mismatch between ARP src hw addr
and ethernet frame src addr.
Change-Id: Ia3ecd5d6dba34876aca8d90bc622a0a1397e48fb
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When the descriptor is chained via multiple parts, vhost is supposed
to reassemble the different parts to form a packet prior to passing
the packet to the next input node. However, bad packet was seen, having
bad ethertype, source, and destination mac addresses.
The problem was due to the destination pointer not being incremented as
each chain is processed. THe result was the first chain is copied to the
beginning of the buffer, the next chain is copied, then the last chain
is also copied to the beginning of the buffer. As a result, the ethertype,
source and destination mac, etc, are being overwritten by the very last
chain of the descriptor.
Change-Id: I78f9a91de68c85574047912576dcc311d7597e21
Signed-off-by: Steven <sluong@cisco.com>
|
|
Increment byte & packet counters when packets are sent or received on an
IPsec tunnel interface. Set counters to zero when the interface is deleted.
Change-Id: Ie9584aa82778875dd4d0c931005f7720b4d5c76d
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I876599d6183fab989949e8ccad5c0a3ef81991be
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Fix builtin server event queue handling
Change-Id: I21b49c37188746cadb2fd9423291c5dc1335798c
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
learn ARP peers if, 1) it's a reply to a local address, 2) we are sending a response to a request.
send proxy ARP responses only in the interface the request was sent.
Change-Id: I22b949c65122824233076492b7dd537daca07bc2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Properly initialize connection index
- Add new session to main hash table
- Drop packets that are completely in the past with respect to the rcv
wnd (e.g., retransmits due to premature timer pops)
Change-Id: Ic0873018ff0a4c59e0913863dc7f0c0f822d5c34
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic896b237a7d141243e1b7d6d4fbb2a120f44363e
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
Change-Id: If5158f6fa7344dee94548c93dace779430e0647f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Basic GTP-U feature
Change-Id: I31226f890a92c5303ac06e112ed7820cae52d9bd
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Added support to the af_packet device to change the MTU size.
Change-Id: I9c9e1e17323721f3efccf70a10b753e12eef94d5
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
|
|
Change-Id: I83a1b02a73fd159f14cca04fed3993f571475a00
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I417dfeba902ca8c3a080773942d4d2ce4335a9c1
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
The api specification had u8 as data type, which caused the python
binding to fail.
Fixes VPP-642
Change-Id: I9ba97959740d44c8f4a12db9356d0d1bcd709a73
Signed-off-by: Aloys Augustin <aloys.augustin@polytechnique.org>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ia91c3e8cb27b9e4c1cccefc0a4857dd9995450ab
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This should avoid random crashes due to reception of packets (multicast
in particular) before ip6 addresses are configured on the interfaces.
Change-Id: Ibcf1a5a2ae2fa75f8b57da1b2f09f32c081210d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ieb0c1e690d6ae082cfedb276252a31fab480e561
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Interfaces with error state are not allowed to go admin up
Change-Id: I09fc09a5b28130aead219dccbc2e0f30ea7414cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I82c663bc0866c6c68ba354104b0bb059387f4b9d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iec1f739fe24c722d0db6c10cc81b5e8333067ea1
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
32-bit code still can use crc32c instructions, but it operates
on 32 registers
Change-Id: I9bb6b0b59635d6ea6a753584676ebcf59c8f6584
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- When the interface rx-mode is changed via CLI, the corresponding device
may want to know about it and to reset the driver. This patch is to add
the callback.
- In the function vnet_hw_interface_set_rx_mode, it appears it is missing
a line
hw->rx_mode_by_queue[queue_id] = mode
because the function is checking if the new mode is the same as
hw->rx_mode_by_queue which is initialized to POLLING. So if the function is
called to change the mode to interrupt, it just returns without doing
anything. This is the check that I am talking about in the same function.
if (hw->rx_mode_by_queue[queue_id] == mode)
return 0;
Change-Id: Iaca2651c43e0ae3fda6fd8dc128e247b0851cc65
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ica634536387d1196366ec96c52770287fcab0768
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Visit http://<vpp-ip>/show/interface or similar.
Change-Id: I076b4661cf19d1b94bb01efdadb5849446be915e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I01650b3b10b79ec549be0d5eceb0e318c06fcb50
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9664214652229b663c3e3ba7406b4ede96bfb123
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8c9f886cb95e92adbe1c646844789ca0a6bb6140
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I01c6e3dc3a1b2785df37bb66b19c4b5cbb8f3211
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
added CLI l2fib flush-mac all
added API l2fib_flush_all
flushes all non static l2fib entries on all valid BDs
Change-Id: Ic963c88f4bed56308c03ab43106033132a0e87be
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I32725006e9235a02cada5b0ad8974bfc4274339f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Ensure that TCP data plus options does not exceed peer's advertised MSS.
Change-Id: I0de824cb3619346f0394dd694942fc1cf33a82b7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Allows pure loss recovery retransmits only on timeout.
Change-Id: I563cdbf9e7b890a6569350bdbda4f746ace0544e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I6ce21317fcaa25781199f4329be815f076ab8b09
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Fix global_learn_count to be incremented or decremented by add and
deletion of non-static MAC entries from L2FIB only. Without this fix,
the counter may reach the threshold of 1M and stop MAC leanring even
though number of MAC entries in L2FIB is less than the threshold.
Cleanup indirect hash key memory used by mac_by_ip6 hash table on
BD deletion.
Change-Id: I13986c4e6304c7956122520dd3f83d6bb6e65a15
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ia11fa42d1f2b21a6195e7dc890f958830f83d3a7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I961685a2a0e4c314049444c64eb6ccf877c278dd
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
(VPP-708)
Change-Id: I9ad636f80bf109ffac9ca1b6d80d5f2c31f2076a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Fix in v6 keys :
* The copy of the keys was only partial
A few suggestions are applied in this commit :
* Since there are not so many unused fields, we avoid to memset 0 and prefer
setting the unused fields to 0.
* By using a cast, it seems painless to avoid allocating a structure for the
keys creation.
Change-Id: Iaee6f036f2a979cceaeb297d98ce6c307a5ac029
Signed-off-by: Clement Durand <clement.durand@polytechnique.edu>
|
|
Change-Id: I8110b2a1d7bf8a818c7e9b6f95c3f60324e8ccab
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I546c761acfbf880717163a035aa691b04337b7bf
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Ibe55e4399c6b78d83268d7c49ed498cab7bfdb43
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I80a723f55fcf2ecc3209a35e8297c88b45b1abfb
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Id4fdf2abf3bae3b14cdc6489ca16d2007da78d07
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
The default bridge domain, 0, is created automatically
with static features. It should be modified by neither
the CLI nor the API. So add tests for, and reject any
operation on BD 0. The new API error message BD_NOT_MODIFIABLE
is returned in such cases.
Change-Id: Iaf3dd80c4f43cf41689ca55756a0a3525420cd12
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: If088e75801831befc6bddb77ea20abe9288b93c4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Fixes VPP-728, VPP-729, VPP-730
Change-Id: Ie8c6c0dd006f98527525e87d19b508bb8d39db69
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Instead, drop the BFD session associated with it..
Change-Id: Ie09877d5c94844be2e833900d9dde7f23edaf8cd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I046d9402b79fdbc6a6663199ffff8e40a278fd51
Signed-off-by: Neale Ranns <nranns@cisco.com>
|