Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch introduces functions to add and delete fast path
policies.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I3f1f1323148080c9dac531fbe9fa33bad4efe814
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0963bae4b56b08c0a9ab4ee1f2738013217e1fb7
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Idc0fdebfea29c241d8a36128241ccec03eace5fd
|
|
This patch introdcues basic types supporting fast path lookup.
Fast path performs policy matching with use of hash lookup
(particularly bihash tries has been used for that purpose). Fast path
lookup addresses situation where huge number of policies is created
(~100k or more). In such scenario adding/removing a policy
and policy matching is not efficient and poorly scales (for example
adding 500k policies takes a few hours. Also lookup time
increases significantly). With fast path adding and matching up to
1M flows scales up linearly (adding 1M of policies takes about 150s
on the test machine vs many hours in case of original implementation,
also matching time is significantly improved). Fast path will not
deal well with a huge number of policies that are spanning large
ip/port ranges. Large range will be masked out almost entirely leaving
only a few bits for calculating the hash key. Such keys will tend to
gather much more policies than other keys and hash will match most of
the packets anihilating advantages of hashing. Having said that
we also think that it is not the real life scenario.
Type: feature
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I600dae5111a37768ed4b23aa18426e66bbf7b529
|
|
Currently 0 has been used as the wildcard representing ANY type of
protocol. However 0 is valid value of ip protocol (HOPOPT) and therefore
it should not be used as a wildcard. Instead 255 is used which is
guaranteed by IANA to be reserved and not used as a protocol id.
Type: improvement
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Change-Id: I2320bae6fe380cb999dc5a9187beb68fda2d31eb
|
|
Type: fix
Added stats for success and failure cases
Fixed Custom app behaviors for the error / drop cases
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: Id6e981c7be5c5b3cee5af2df505666d5558da470
|
|
Type: improvement
Change-Id: I85c73cb940d81d0b249eda0d57de135bcd798418
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: Ic949e3136a7cf27011d098a50e91920f83226ea9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
We were not allocating space for the
variable length payload in the response
message.
Type: fix
Change-Id: I345102f4555f66c5632ab0882ca1dd178e98eb7b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Adding support for the SRv6 TEF (Timestamp, Encapsulation and Forward) behavior defined in
draft-filsfils-spring-path-tracing (https://datatracker.ietf.org/doc/draft-filsfils-spring-path-tracing/).
Type: feature
Change-Id: I7f38b593147daf8d27af9c983448cf82947e5bed
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I646ac946d0b07929dfdd1966a4f4a3b697768040
|
|
The flow_report_process_send() function always allocates a frame.
However, when no template_send is needed, template_bi is ~0.
When this happens, no vectors are placed in the frame. When
the frame is then "put", a check for n_vectors == 0 prevents
the frame from actually being placed back on the free list.
Fix that by using a direct call to vlib_frame_free() when
there are no frame vctors.
Type: fix
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I936b5cea4cb3c358247c3d2e1a77d034a322ea76
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3c573641bd95fe899823b66f6c59a2525a18d293
|
|
When failing to match an ip address, we should not reset the ip address
that could have been initialized by a previous match.
Type: fix
Change-Id: I026766391eb3eb8230f75f66bf4b681e774741d9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
*Buffer leaks and corruptions during internal errors, either overriding
or missing to add the buffer to the list
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I1ead1eca1cde10a36d60dbfcfe36ca6375690b03
|
|
Type: fix
Pace the main thread activity for reassembly timeouts, to avoid barrier syncs
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: Iebe9a38d2a7a6471afa6621f12bb545668dc8384
|
|
- update wordlist and fix typos so that 'make docs-spell' passes
- sort spelling_wordlist.txt
- update docs maintainers list
Type: docs
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I38ac7850c604c323427d2bb6877ea98bd10bcc38
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I4679acbe4fd4400d57c0a79b0a6c74c8f1639703
|
|
Add generic flow type and rss action type to vapi. It is to support
creating generic flow rule via vapi.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: Ifeaa007679487e02bd2903dc591d80a1caba33bc
|
|
Type: fix
pool_is_free_index() check is performed only for the first element
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: Icadc715a9b54761ec69805a134a69a262137536d
|
|
Type: fix
Custom node functionality is missing in v6, so bringing in similar to v4 functionality into ip6 as well
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I28b0be2fc55a00bfc0b456b1caaa1dcf5641a44e
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ie63c360f2e42e9e5799f5c536453823ea95ed3b8
|
|
single struct to hold all api handler, flags, etc.
Provide functions to toggle flags instead of writing directly to
internal data.
Type: refactor
Change-Id: I4730d7290e57489de8eda34a72211527e015b721
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Pace the main thread activity for reassembly timeouts, to avoid barrier syncs
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: If8c62a05c7d28bfa6ac530c2cd5124834b4e8a70
|
|
Type: fix
Adding stats from debugging point of view
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I3118d3fd5d630fad80a42ab960e30459789123cf
|
|
Type: fix
as number of reass contexts increasing based on workers, increasing the number of nbuckets for bihash
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I83d061a709ecb8845ce745b18d03fdefc795787f
|
|
Type: fix
There were several places where mbps were converted to kbps for
link_speed, but often drivers of devices set link speed to unknown
(0xFFFFFFFF) on initialization, so there was multiplication of
link_speed equal 0xFFFFFFFF(UINT32_MAX) by 1000, this provides
overflow of unsigned int, and as result link_speed was equal
4295 Gbps, but actually link_speed is unknown.
Signed-off-by: Anton Nikolaev <anikolaev@netgate.com>
Change-Id: Ib462ed6ed685654af4687041e115bfb74e640f13
|
|
Type: fix
Change-Id: I69f7e23b23e8cfcfe57ba019862470e0eb4b06db
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: improvement
Change-Id: I82e7c0acc547794bcc7c42f4b8881a8251bf7a9b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixed at infra level.
Type: improvement
Change-Id: I43cf16870c1d2e12189073f7786d62375c46e2c2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This fixes long standing annoyance that CLIs with optional args cannot
be executed from file, as they cannot distinguish between valid optional
args and next line in the file.
Multiline statements can be provided simply by using backslash before \n.
Also comments are supported - everything after # is ignored up to the
end of the line.
Example:
# multiline cli using backslash
show version \
verbose # end of line comment
packet-generator new { \
name x \
limit 5 \
# comment inside cmultiline cli \
size 128-128 \
interface local0 \
node null-node \
data { \
incrementing 30 \
} \
}
Type: fix
Change-Id: Ia6d588169bae14e6e3f18effe94820d05ace1dbf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
*Buffer leaks and corruptions during internal errors, either overriding
or missing to add the buffer to the list
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Change-Id: I6c2406cff53a741e800e2d05593696f3e9fd6ff5
|
|
Type: docs
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I23008cde47d8b7a531346eab02902e2ced18742a
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I952ba7e042779855e29628d048da7edec1caaafd
|
|
We allocate vring_spinlock for all vrings in the vui, not just the ones
being used. So when we free the vui, we have to free vring_spinlock for
all vrings, not just the one being used.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3951fda71ce6e11474b04302116ea9e08b404758
|
|
Type: fix
A simple "create host-interface name xxx" is enough to trigger the bug:
The interface is not found, and we goto error with apif=NULL
Signed-off-by: Gabriel Ganne <gabriel.ganne@gmail.com>
Change-Id: I2f894176d39b3d15efab054dc7340e7a0600a2e8
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: Id19a52df4f237cf5d85d305fdc279ab7df2d6f4b
|
|
Type: improvement
Change-Id: Ibc1b5059ed51c34334340534e9eb68121f556bce
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
It looks like in a distant past we were using a vnet_rewrite but this
no longer the case.
Type: fix
Change-Id: Ib8d336aec7d5abd7749f543739f531144e76e551
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iee6784c37a835b49d962ae6f87c279cbe65dde15
|
|
Type: fix
set use_custom_mac for args in create_vhost_user_if_v2 API
Add testcase for custom mac-address
Signed-off-by: Fahad Naeem <fahadnaeemkhan@gmail.com>
Change-Id: Iac64d818e0f1e6d36187fe769ee33d202aaafd05
Signed-off-by: Fahad Naeem <fahadnaeemkhan@gmail.com>
|
|
Type: feature
Change-Id: I940b6c9d206e407f3e17d66c97233cd658984e61
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Add vapi_connect_from_vpp() and vapi_disconnect_from_vpp()
calls to allow API clients from within VPP process.
Add a new memclnt_create version that gives the user a
knob to enable or disable dead client scans (keepalive).
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id0b7bb89308db3a3aed2d3fcbedf4e1282dcd03f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I67f5a2c8902dd14c09472c25599b3b1b493a6948
|
|
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: I792467b73449074e59c4232b1f82d134c399624c
|
|
Enable the flow action for RSS queue group. Packets can be distributed
among queues in group based on specific fields. Queues must be continous
in the group. This feature is to support 5G enhancement requirement.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I74fdc617659bcb61f00b3b1934c95ab1c73bb8f3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I02aec410eaa7ccb999159b6967414fbaf4e76a3f
|
|
Type: improvement
Change-Id: Ibdadeb4e685f45a93f45504a84709391489abb6a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I79bfe91e81983b619c61a32285d8e038c2654147
|
|
Make sure producer drops lock when it waits for empty ring slot.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id77d54ee8c01bed20c9eaf5ad372ed4b1e9fa712
|