Age | Commit message (Collapse) | Author | Files | Lines |
|
LLDP packets are dropped at interface output node if each slave's link
is configured as the LLDP interface. The admin state is configured and
managed by the bonded interface, so slave link's state is down by default.
The checking for the admin state UP should be ignored for the slave link.
Change-Id: I06ca250f42fcb8cc50e0ea3a3817a2c5b56865df
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
a double version of is_tagged, uses "free lanes" in _mm_cmpeq_epi16
to check a second tag
this code was not yet tested for performance
Change-Id: I640017e1cc75c85a33d196ee911a7e4a512d9849
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ieb5522cd5cb27bcbce808d4cd6df5248716da43c
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I4a529dfab5d0ce6b0bbc0ccbbd89c6b109dbf917
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I56bf6b46527f9465d78ed7c08b6e216e50c135ec
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
show interface rx-placement somtimes displays the wrong interface names.
This happens when there exists subinterfaces in VPP.
The problem is due to the function show_interface_rx_placement_fn is calling
format_vnet_sw_if_index_name with hw_if_index instead of sw_if_index.
VPP has the concept of sw_if_index and hw_if_index. Each serves a different
purpose. When there is no subinterfaces, both hw_if_index and sw_if_index
may happen to have the same value. But don't count on it. When the API calls
for sw_if_index, we must pass the sw_if_index although the hw_if_index has
the same type which the compiler does not catch. Passing hw_if_index for an
API which requires sw_if_index may have an unpredictable result such as
described in the VPP-894 and sometimes it may even crash if the particular
index does not exist.
Change-Id: I76c4834f79b88a1c20684fcba64f14b2da142d77
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit bafa4d048439fdbcc0bd577e43a2784d1b89bfc5)
|
|
If a bonded interface is in active-backup mode and configured with
IPv4 and/or IPv6 addresses, on slave interface link up/down, send
a GARP packet if configured with an IPv4 address and an unsolcited
NA if configured with an IPv6 address. These packets can help with
faster route convergence in the next hop router/switch.
Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2
Signed-off-by: John Lo <loj@cisco.com>
|
|
Add API methods to configure LLDP and set interface to enable/disable.
Also add port description TLV for LLDP.
Change-Id: Ib959d488c2ab8a0069f143558871f41fcc43a5d3
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
traffic (VPP-892)
When stacking DPOs the VLIB graph is also updated to add the edge between the nodes, if this edge does not yet exist. This addition should be done with the workers stopped.
Change-Id: I327e4d7d26f0b23eb280f17e4619ff2093ff7940
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit c02bd03ddf5eec9e9c79811360685f13e4ba8ee1)
|
|
Change-Id: I0e6c86bd923fcf7cf16f948b9869a5927e6d3745
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
A call to 'clib_smp_swap (&((dq)->interrupt_pending), 0)' was creating
a SIGBUS.
Instead of making dq->interrupt_pending aligned on 64bits, we reduce the size
from uword (u64) to u32, as the number of pending interrupts will never
go above max of u32.
Change-Id: Ifa5a6d3b7adee222329a671be01305cf50853b33
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
Change-Id: I36bb47faea55a6fea7af7ee58d87d8f6dd28f93d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
fixed instability in l2bd_multi_instnce test - sometimes failing with extra
packets captured
it appears l2-learn was not updating hit entries but rather a copy of them.
if the ager did not have a chance to run before the test was running the
learning cycle - entries were not updated with the packet's seq num - causing
packets to flood when hitting the stale seq_num in l2-fwd - hence the extra
packets
fixed handling of filter entries
revert workaround for instability in test
Change-Id: I16d918e6310a5bf40bad5b7335b2140c2867cb71
Signed-off-by: Eyal Bari <ebari@cisco.com>
(cherry picked from commit 25ff2ea3a31e422094f6d91eab46222a29a77c4b)
|
|
Change-Id: Ib7824bfc08cb3c8f20258379e1a1f2c159c4f687
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I6b19634ecb03860a7624d9408e09b52e95f47aef
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
after deleting a sub interface with IP4/IP6 address vpp crash
Change-Id: Ie768ca845b9e2394f61e2a8e9722a80a788746e7
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: Ib8c72f8e08e89357b64f2f69ab70d60d3a7ec506
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- multiarch on svm fifo
- avoid ip lookup on tx
Change-Id: Iab0d85204a710979417bca1d692cc47877131203
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I77412aa8c17b45b1533604e7bfe8fe052ed0f80a
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
If interface is down and queues are not configured then we are not able
to change rx-mode. This change introducess default mode which is stored
per interface and applied if driver wants.
Change-Id: I70149c21c1530eafc148d5e4aa03fbee53dec62f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
source is connected
Change-Id: I39fb0ec44cc322eaa12c0ff0700fc405d3982bfc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic2f2dc234199a5f882846880cbacff20fc8d477b
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: If35171005e409f77bed4cc16eccb66a85aae5dfb
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
l2_classify memeber table_index was overlaid over l2.l2fib_seq_num
which over written when table_index gets initialized in l2_input_classify
solved by overlaying both table_index and opaque_index as only one is used
seperated l2fib seq num from l2_input configs
for better handling of theoretical ABA issue where an entry for a deleted
interface is considered valid by the ager because a different interface with
same sw_if_index and seq_num was created before the ager got a chance to delete
Change-Id: I7b0eeded971627406f1c80834d7e02c0ebe62136
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
- limit minimum rto per connection
- cleanup sack scoreboard
- switched svm fifo out-of-order data handling from absolute offsets to
relative offsets.
- improve cwnd handling when using sacks
- add cc event debug stats
- improved uri tcp test client/server: bugfixes and added half-duplex mode
- expanded builtin client/server
- updated uri socket client/server code to work in half-duplex
- ensure session node unsets fifo event for empty fifo
- fix session detach
Change-Id: Ia446972340e32a65e0694ee2844355167d0c170d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I83a6c277fa211ac2c2ca2d603650c992886af0a7
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Id160346ebf533ee5f55bd735803624a75ed997b9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9999474c1a4b744f5d5880ee99a0293c576f2819
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I25ccf8260dbe7e1550aee3904a688fc135ce1f03
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2b78dad740b67fc05b0e2cf9c180809bc0962cd5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iab2aa5fd92b9e95049f55fce4177e236a482723c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Id1139533c41cabef48394b5d79750608e0b74179
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I034efb9fc3ebb846c0aef07b18c1f110b8cbf3e3
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
l2_len was not updated for the third tag
as the ethernet node retracts by the vlan count after parse_header (using
ethernet_buffer_header_size) it ends up pointing before the ethernet header
+ some minor cleanups
Change-Id: I4ccaedd33928912e5d837376f146503b27071741
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I7dedf283c83c7f0e0b7642f095b68bc0b40898cf
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
after deleting a sub interface it's l2fib entries are left with a dangling
sw_if_index (while waiting for the ager to delete them).
changed "show l2fib" to reflect that state with "Deleted" as the interface name.
added sleep in test_l2_fib as a workaround for packets still passing after flush
will investigate...
Change-Id: Id998d7d3c6a073ef5005c5f3009e1cfb7febf7db
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
ICMP to ICMPv6 error message inner UDP packet translation
delete ST entries when deleting static BIB entry
Change-Id: I2a28631ac040e20827a692331506cd8254f70916
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
crc_u32 was not defined for non x86_64 with SSE4.2 processors.
Calls to "crc_u32" are removed and replaced by either a call to
clib_crc32c or a call to clib_xxhash, as the result is not used
as a check value but as a hash.
Change-Id: I3af4d68e2e5ebd0c9b0a6090f848d043cb0f20a2
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
Change-Id: Ib62ee0eacd6c91dc4cd95835efe901079754ef42
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I7f85870ef99405727312a5de6839c8875c9fa1c5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I70fb60619a0a02d891276ea6c7ac277ba2b26fa3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- refactor existing congestion control code (RFC 6582/5681). Handling of ack
feedback now consists of: ack parsing, cc event detection, event handling,
congestion control update
- extend sack scoreboard to support sack based retransmissions
- basic implementation of Eifel detection algorithm (RFC 3522) for
detecting spurious retransmissions
- actually initialize the per-thread frame freelist hash tables
- increase worker stack size to 2mb
- fix session queue node out-of-buffer handling
- ensure that the local buffer cache vec_len matches reality
- avoid 2x spurious event requeues when short of buffers
- count out-of-buffer events
- make the builtin server thread-safe
- fix bihash template threading issue: need to paint -1 across uninitialized
working_copy_length vector elements (via rebase from master)
Change-Id: I646cb9f1add9a67d08f4a87badbcb117980ebfc4
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Added ICMP error messages translation.
Added check for multi thread (not supported yet, so init failed).
Added API definition for custom NAT64 refix.
Change-Id: Ice2f04631af63e594aecc09087a1cf59f3b676fb
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I971c110ed126f1a24a963f9d3b88cf8f8c308816
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I744e7d64d94dbb302f2c1246663480f720672ee2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
API for P2P Ethernet feature
Change-Id: Id0280f42b9ce2428262e79c4dc309595037cd10e
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I6a566d1dc9531b790bdcb00edc73516f86daeb72
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icffd2862eadbe9ddfb3ee34f3cb19c9324b3d9b4
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Fixes VPP-872 and adds support for End.T
Change-Id: I3c32cb6e412f37babe1abd293c0b6b49367fc2a9
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: I586a758a8b4b0ea5ca030b2df2796f5acb49e154
Signed-off-by: Neale Ranns <nranns@cisco.com>
|