Age | Commit message (Collapse) | Author | Files | Lines |
|
Extend the srv6 sid list structure with policy type to support
different SR policy types
Type: feature
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: I6a8cf82b1269e1c46f3757df0047b306f613112b
|
|
Type: fix
Signed-off-by: jxm <jiangxiaoming@outlook.com>
Change-Id: I5a6a1ce9f232d4ed0fd4707cd5aa9b46cc8a2a5a
|
|
Type: fix
Change-Id: I9d3344374738f8cf883cffb4715c76b50bb4bfce
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
|
|
- add format_vnet_buffer and format_vnet_buffer_no_chain to mirror
format_vlib_buffer and format_vlib_buffer_no_chain
- format_vnet_buffer used to be the "no chain" version, replace all of
its current use with the corresponding format_vnet_buffer_no_chain
- add a function to dump vnet buffer details from gdb
Type: improvement
Change-Id: I143ce845f80e7ef937ea33a557b6e3b5988c5b8f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
vhost interrupt mode support with mq does not work when coalesce frame
is not configured to 0.
When packed-ring is configured, we were also setting the wrong flag
for want-interrupt.
No need to trigger an interrupt to RX infra if there is at least one
queue in the same thread that is doing polling.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I8e64250f2aa6bf611a777a53e4d2c1076d83305f
|
|
Remove unused parameters and fix warnings.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I2d0e7b84b56817999283ecb6be606159dcb26a28
|
|
ip/ip_types_api.h is already installed by the build system
Change-Id: Iec43e0ad50e32473d93ea8f7281b5a6477ddc87f
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
Type: fix
Creating a sub-int without exact-match set, and subsequently adding an
IPv4 or IPv6 address will crash VPP. This fix catches this situation and
refuses to allow the caller to add an IPv4 or IPv6 address on an
ethernet sub-int that does not have exact-match set.
TESTED:
Before this change, the following crashes VPP:
```
DBGvpp# cre sub TenGigabitEthernet3/0/0 1 dot1q 10
TenGigabitEthernet3/0/0.1
DBGvpp# set interface ip address TenGigabitEthernet3/0/0.1 2001:db8::1/64
<crash>
```
After the change, VPP refuses to act:
```
DBGvpp# cre sub TenGigabitEthernet3/0/0 1 dot1q 10
TenGigabitEthernet3/0/0.1
DBGvpp# set interface ip address TenGigabitEthernet3/0/0.1 192.0.2.1/30
set interface ip address: sub-interface without exact-match doesn't support IP addressing
DBGvpp# set interface ip address TenGigabitEthernet3/0/0.1 2001:db8:1/64
set interface ip address: sub-interface without exact-match doesn't support IP addressing
```
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I42997db314225cd186ebb54013b5717ace7f7bd6
|
|
Type: feature
Change-Id: Ia970f444ba2f38b7a42ea94942c906f1b541511b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Implement a simple source address selection algorithm
for IPv4 and IPv6.
IPv6 does not yet implement RFC6724 but supports link-locals.
ping now chooses correct source address for link-local destination.
Added ping support for link-local multicast (e.g. allnodes).
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I1a3382c1f7d4ace0386c2c19e4e47b045b73a3ed
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I70791285cbf427479d2dcbf70ffdce2253add2fb
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idab0f455b52a38efd2cf3781497d8cc7f57bfa42
|
|
than 16-8-8-8
Type: feature
the memory trade-off is:
for 8-8-8-8 tries
DBGvpp# sh ip fib mtrie mem
ipv4-VRF:0 mtrie:8068 hash:3499
totals: mtrie:8068 hash:3499 all:11567
for 16-8-8
DBGvpp# sh ip fib mtrie mem
ipv4-VRF:0 mtrie:333056 hash:3499
totals: mtrie:333056 hash:3499 all:336555
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5271a4322d786de6e47613cff9bd432762dbed2a
|
|
Type: feature
The difference being the MTRIE type they contain.
THE FIB continues to use the 16-8-8 version.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5a54d4e6e6cc639f18a3fb65ef2925507a7ef1de
|
|
Type: improvement
there's a time-space trade-off between the 16-8-8 and 8-8-8-8 stride.
FIB continues to use the 16-8-8. Other features are now free to make the
choice.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6691a163486ce62e75e629f6ef0c990f253df8e5
|
|
Type: improvement
the existing mtrie functions use the existing 16_8_8 mtrie. Rename them
to make that explicit. Then we can add the 8_8_8_8 types and functions
alongside.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: If5ce7a282d5d3742dc65bcd0523220235d9c510d
|
|
When a packet goes through interface-output, whether it should be
captured or not will be evaluated twice: in interface-output and in
interface-output-template (<interface_name>-out) node.
interface-output should only capture packets if there is an interface
filter, otherwise it should defer evaluation to
interface-output-template.
Type: fix
Change-Id: Ia720c5d184a236335e1d7d44d8c04caf87af5630
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
as opposed to wrtiing out the mtrie steps one by one each time.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I1248861350f9189f9a67ac6e68940813af279e03
|
|
Type: fix
There's no such thing as a conflict between the FIB and adj tables. This
is code that should have been removed way back in 16.04.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4524e7921b03b89106dd1f35aa1171d0945367cf
|
|
Even when periodic RAs are disabled VPP would respond to
router solicitations. Making it impossible to have an IPv6
enabled interface with hosts connected to it without VPP
acting as a default router.
This change drops RS messages if the radv_info->send_radv is
off.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9a68f8e12c93c1c00125b54f8fd454f48fa22caa
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
l4 match parsing should not try to consume the whole input, otherwise
it breaks cli such as:
'classify session ... match l4 dst_port 22 action set-ip4-fib-id 2'
Type: fix
Change-Id: I81a1b5779811f7df8286a371f85fafe09c947b87
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
- restore fib paths support for ip4
- initialize payload_proto to the relevant default protocol so that
'via <dev>' paths are supported
- fix 'rx all'
- fix temp path vector mem leak
Type: fix
Change-Id: I564d88dc4dce86884ff6791af69974e6d70ff7ca
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I49c4183a443b7b39924328900e6a6ac2e09be426
|
|
The ipsec startup.conf config currently exists in ipsec_tun.c. This is
because currently the only ipsec{...} options are tunnel related.
This patch moves the ipsec config to a common file (ipsec.c) for future
extensibility/addition of non-tunnel related config options.
Type: refactor
Signed-off-by: Zachary Leaf <zachary.leaf@arm.com>
Change-Id: I1569dd7948334fd2cc28523ccc6791a22dea8d32
|
|
forwarding gre payload
This commit introduces 2 fixes:
1) After GRE decapsulation sw_if_index[VLIB_TX] is set as fib index of GRE tunnel.
But since GRE tunnel can work on v4 endpoints and have v6 payload, we need to reset it.
In case we get IPv6 packet inside IPv4 GRE tunnel (or vice-versa) fib index can be (and usually is) invalid.
2) Check that ip-table and ip6-table are the same when setting interface as an unnumbered one.
Also, fix for the pipe test include setting the right unnumbered interface for the pipes
Type: fix
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Change-Id: Id13d239cfdd21e0db6b1c9725f01c40d4af4d800
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I90c2a191ab34a2a7df3fb0a951e5fc78f40ccfe2
|
|
In high traffic scenarios, if app crashed or hang on somewhere, app_mq
will quickly accumulate to full, after which vpp worker will try 100
times before giving up allocating slot for every msg. This will cause
vpp main thread barrier sync to fail.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I2b2bf2b272c5b3ca7e4a56af179af12bbcde149d
|
|
App namespaces can now be associated to a linux ip netns, e.g.:
app ns add id <ns_id> secret <n> sw_if_index <n> netns <netns>
If session layer's app sock api is enabled, this triggers the creation
of an abstract listening socket in the netns that has been configured.
For the example above that would be @vpp/session/<ns_id>.
Consequently, vcl, or other apps attaching to vpp, can connect to said
abstract socket from an ip netns without the need to share unix domain
socket files. In particular, for vcl it's enough to set app-socket-api
to @vpp/session/<ns_id> in the conf file.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I26fdc626a760a3f423c5b8be4251623f6e9cd73a
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8e80252b85dda9a8f5699109264dc1b913581442
|
|
* Add clib_socket_init support for abstract sockets
if name starts with an '@'
* Add clib_socket_init_netns to open socket in netns
* Add clib_netns_open
Type: feature
Change-Id: I89637ad657c702ec38ddecb5c03a1673d0dfb104
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6d9473a7b5ab0fbd460e80df36368dd43c5e4fee
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9301fbbcd611033b4b6ad5313edbc66840f5bb3a
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iecb171c9451c0fa9a7c6ae4b3e9ab7774a4fe585
|
|
Type: improvement
Change-Id: Iaad50b2044702c46eff287708dfcb24e61022104
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Refactor neighbour advertisement code into inline function
to be used solely in feature nodes.
Change-Id: I1e84c54f9807b4e3d90c37526c78a7afcb0ba087
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
The function ip4_neighbor_advertise may be called with NULL addr. In
that case, it looks up addr from fib by calling fib_sas4_get which
returns true or false to indicate whether there is an ip address
associated with the interface or not. But the caller to fib_sas4_get
does not check the return code and blindly assumes there is always an
ip address associated with the interface. As a result, it ends up
sending GARP to the bogus ip address if there is no ip address
associated with the interface.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I7aa0270766c3943ed8ca8f8a092cae34567fd30e
|
|
Type: refactor
Change-Id: Id10cbf52e8f2dd809080a228d8fa282308be84ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I776bf797e07bb3cfd0510a4c09d8182edfa193bd
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I5f4517c65c37c5d73fcd608dc29dfb1d25d4cd8d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I8337f81fdcd196fcb0e61f8129fec322e9a1e8f1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I2dd9a18497992ac7e2686c14f5d17eccccda0cda
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
These file are no longer needed
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
|
|
correctly.
Type: fix
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4bc2eb394a8f9d01c5a12de2ce963c22209d5439
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ief06b1509d31b55efc8d1436b6ff9e01c6037a32
|
|
Put plugin init order inside plugin instead of in vnet
Type: improvement
Signed-off-by: Bin Zhou (bzhou2) <bzhou2@cisco.com>
Change-Id: Icbacdb3f1cb4ac9d74e3f78458e8bc333793b4d6
|
|
Use autogenerated code.
Does not change API definitions.
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Iacc58d27ac51c8a1c571087f98297e046b3477c2
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If0712f01bdd6f2fc892bcbe4e2cee28affd02520
|
|
Using the cli "set interface tx-queue", it is not possible to assign
tx queue to the last worker thread.
The reason is that vdm->first_worker_thread_index is 1. Adding that
to clib_bitmap_last_set (bitmap) exceeds vdm->last_worker_thread_index
when the CLI specifies the last worker thread.
Also make the threads argument optional to enable user to unbind a queue
from any thread.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I796259c20f571289c8f5a97b9418caf452d0ab3d
|
|
Type: fix
For a TAP device the MTU is set via the ethernet_register for TUN we
need to do it explicitly (like we do for other tunnel types).
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie6a13c795acb35b53f8d99b05c70c3e73a7b428e
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I05be39671a9ed0688d4e006f0f9354aa6560a41b
|