Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
Along with the port information, we need to validate the IP address details as well.
This is very useful in the case port re-use scenario
Signed-off-by: Srikanth Akula <srakula@cisco.com>
Change-Id: I11e1ebcd3e56aae47ac235a89606a83c928aa6bb
|
|
Type: feature
fts and trex rely on yaml config files. Verify
that they are valid, so comitters can catch
errors early.
Change-Id: Ide0bb276659119c59bdbbc8b8155e37562a648b8
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type:feature
For cases when proxy is in use IPv6 flow label received in origin pkt needs to be added
to ipv6 header of outgoing pkts from proxy to original destination and vice versa.
Signed-off-by: Tarun Gupta <tarungup@cisco.com>
Change-Id: I143f7e67237c0f865333078628a016b50ad5e630
Signed-off-by: Tarun Gupta <tarungup@cisco.com>
|
|
Type: refactor
Change-Id: Ic1c3e1f7987702cd88972acc34849dc1f585d5fe
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
if the packet is about to be fragmented, then don't call any of the
actions that expect the rewrite to have been written.
1) don't double count packets thru the adjacency (original & fragments)
2) don't double decrement the TTL for fragments
3) return to ip4-midchain post ip-frag if that's where we started.
4) only run midchain/mcast fixups if not fragmenting (if no errors)
Change-Id: Ib2866787a42713ee5871b87b597d8f74b901044b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: Ib59bf664d8da20516d8f16d716c5e8698675da4b
|
|
Make sure packet is big enough before processing it.
Policy matching is done speculatively but is discarded if packet is too
short.
Type: fix
Change-Id: I647db2c4e568b0d9bf2cfd5056e1b1c2e25132fe
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
The number of paths on the mpls tunnel returned through the bapi is
always zero. Doing a ntohl on a uint32 and poking it into a uint8 causes the problem.
Type: fix
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: I4135ad43a891e7818ca673c8067ef1f11cb34530
|
|
Type: fix
Change-Id: Ifb6ead644c0273b84a5647f7923053f1db7c5a76
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Improves fairness for sessions that are snd space or pacer constrained.
Change-Id: Ida5f523090f1dcbfb17bf5116bc7917747ac8593
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Several nodes include buffers in their traces, but only the 1st. When
formatting the trace we must not try to iterate through all chained
buffers.
Default to display only the 1st buffer.
Type: fix
Change-Id: Ib3c668bbf4ab70ae68eba2ac402c7b7329825b70
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Do not copy invalid seq number if packet is too small.
Type: fix
Change-Id: I1e78f5920e9645521f57efccaf35bbf9ce0676a8
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Avoid re-dispatching new events if they've just been added to the old
events linked list.
Change-Id: Ie5d0b799eae6cebb118d97204e5111eb194c0b8e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: Icf3c73cd7eb7565ed6e1b0371da172b5408a9d36
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I18dfac9c3d2f539edf20dba64cd2b7b541154144
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: style
Change-Id: I286280fffa6ab5d3e15986911a4ccc35efbf41c3
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: style
Change-Id: I7d44b7fab1b8b196e4934cb4832ee51084c5bf98
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
- unformat_memory_size() writes to a uword *
- Limit cli input to u32
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I453a5633e04f9ee6f2f1a843634f99063a81579b
|
|
- Limit cli input for rx fifo size to u32
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: If5a8e0668acf5b0f369acf4f120e47a012bd1899
|
|
VPP would fail in tcp_connection_reset() if the tls
or app session was just created.
Type: fix
Change-Id: I45d107f57e4f3fc468c15ca3392d5e1c413bd690
Signed-off-by: Zeyu Zhang <zeyu.zhang@intel.com>
|
|
lgt->key is already a pointer to the key, hash the pointed data instead
of the pointer value.
Type: fix
Change-Id: I4d29d8c6519afc3843cb2e5ef88795d60f715e23
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: docs
Change-Id: I039ba9ad5385452b202366fba0b367506a21ea4f
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I9015fc60e8d77e5d5ac36bf2862c1fe794addb81
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
ip4_mtrie used full memory barrier compare-and-swap in set_leaf () and
set_root_leaf () even though only one thread updates the trie. Replaced
such instances of compare-and-swap with atomic store-release.
Type: refactor
Change-Id: Ic6e3c84480697915541acd16dcc630d1c436137d
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
|
|
ip4_mtrie set leaves atomically in set_leaf () and set_root_leaf () but
deleted leaves using regular stores in unset_leaf () and unset_root_leaf ().
Changed leaf deletion to update mtrie using atomic store-release.
Slight performance improvement was observed in benchmarking on Qualcomm
and Xeon machines. Benchmarking involved running 'ip route add' and
'ip route del' on vpp instances. Below are the routes/second for adding
and deleting 100k routes before and after the store-release changes:
Xeon Add Routes Before: 1.140e6, 1.139e6, 1.148e6, 1.158e6, 1.155e6
Xeon Add Routes After: 1.167e6, 1.170e6, 1.174e6, 1.173e6, 1.169e6
Xeon Del Routes Before: 7.287e7, 8.089e7, 6.048e7, 7.171e7, 7.821e7
Xeon Del Routes After: 8.729e7, 7.353e7, 7.856e7, 8.209e7, 7.787e7
Qualcomm Add Routes Before: 3.709e5, 3.954e5, 3.739e5, 3.759e5, 3.671e5
Qualcomm Add Routes After: 3.879e5, 3.967e5, 3.936e5, 3.764e5, 3.817e5
Qualcomm Del Routes Before: 1.286e7, 1.379e7, 1.353e7, 1.230e7, 1.331e7
Qualcomm Del Routes After: 1.411e7, 1.355e7, 1.373e7, 1.394e7, 1.314e7
Type: refactor
Change-Id: If3acd25a2fb87addd0eb13d82d3c8f46579e8060
Signed-off-by: Jason Zhang <jason.zhang2@arm.com>
Reviewed-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
|
|
Type: refactor
Change-Id: I37899a9c1c2b0790bee90b84aec6b51cdd5236b4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: Ibdbac568d5f765e6b5c959cab5e32dc33335064d
|
|
Type: fix
Change-Id: I51282182952a66be698226bace39626df4d67b9f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: Ib137c453ff2dd5b9d028c653afa80e6b2b81b9e0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: feature
Change-Id: I246346b82858e73b16d727e2106350bc0fc3c6f2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
use correct value for sanity checks
Type: fix
Change-Id: If33db5ce3e4a26f7876c2a67832ca2947563e211
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: refactor
As a result, transport-deleted is the only session state that has no
transport data structure.
Change-Id: I2da2bc4bbb141d8a7b52faae66a4733de8f8513b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This fixes incorrect tracing of flags such as MORE_FRAGMENTS.
Type: fix
Change-Id: Ia5698418a7cbb45c18bc9c95f560cea020e63c39
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
When processing the last buffer of a reassembled packet, the current
buffer will be freed and must be reloaded using the updated index.
Type: fix
Change-Id: Ib39e29e60eb527b4cd4828a3aa37d82c8dddd709
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
- when the addresses were learnt a copy of the client was sent to the
main thread, this meant the unicast adjacecny was saved on the copy
not on the original.
- Add logging.
- Improve the proxy-node that hands the clint packets so the DHCP
packets are traced.
- allow a renewal to configure new address data
Change-Id: I6ab0afcccbc4a1cdefdd1b8beeda8fc7ba20ec1f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
A handy tool in case you need to know which metadata will be changed
when a packet visits a certain node.
Reflect metadata changes into format functions used by the
vpp-specific wireshark dissector.
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I96fe8a24db4082bb29fe2a33cc522e8616a3a1bb
|
|
When segmenting, new buffers must inherit the original buffer trace
handle.
Type: fix
Change-Id: Ibd1859a501b2862906dfc563b98652cfee5681da
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
In a rare event, we may be skipping processing lacp pdu's when the it is
not in steady state.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3595d22dbff8a97dce9fb4d4452d2051bcf6f523
|
|
We reserve 40 slots in cpu->copy array prior to copy out to avoid overflowing
the array. However, 40 is not enough for the jumbo frame because desceiptor
buffer len is likely at 1536. Change the reserve to 200 and add ASSERT to avoid
encountering the same problem in the future.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ibf0c03c4b4f33e781d5be8679ccd6c3a4b4a646d
|
|
Default hop-limit for the encapsulating IPv6 header is a compile-time
constant. Add ability to specify custom hop-limit, in order to avoid
packets being dropped with "hop limit exceeded in transit" response in
certain network configurations.
Type: feature
Signed-off-by: Ignas Bačius <ignas@noia.network>
Change-Id: I77f2b35c987cfd31801dc2744d31fb3c1984158f
|
|
Type: fix
- Initialize max_seq on both transmitted and retransmitted segments
- Keep track of segments that have been sacked.
- Track new data segments sent during recovery
Change-Id: Ice55231a3da200ae6171702e54b2ce155f831143
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Ensure that sack retransmit logic does not try to inadvertently send new
data.
Change-Id: Idfda19643577d9c1b58e2af8d8283cabfbaf98e6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I382499061ff4b1c2cc1b70ebbf9725ff0e1be325
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Avoid corrupt next_index in vnet_buffer by moving input and output
variables into different memory places instead of sharing a common
space.
Type: fix
Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75
Change-Id: I34471fc6d0c8487535fac21349e688f398934f6d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Change-Id: I4d5546d1f9b3a162291997f6f0c094c5c3d6cf31
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I5b03e5de111c3a3b8da4e9f02cba0aa99e3ee9f3
|
|
l2-flood and bier nodes reset vector length without updating it to its
effective size. Introduce a helper to do it (this allows ASAN to keep
track of the new vector size).
Type: refactor
Change-Id: I2d652550c440f0553a2b49c3ee3d37b49ebc16c3
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
OpenSSL TLS is well maintained and many issues are fixed, and it makes
OpenSSL as the default engine will be more friendly to users if app does
not configure a specific engine such as http_static
Type: fix
Change-Id: I37499af1edd40ffb53b00436044d1fce3b43348d
Signed-off-by: Yu Ping <ping.yu@intel.com>
|
|
Type: feature
Change-Id: I888d415ff645b3827df7d4cfb0d3c5f4ac940617
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I40169fbbe8a20670dd612c341b6c78b5c925bf74
Signed-off-by: Florin Coras <fcoras@cisco.com>
|