summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2020-06-23udp: jump over ip4 optionsFlorin Coras1-3/+3
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4f57a776302e11815fcea433ba8cf6724799ff65
2020-06-23ip6-nd: punt neighbor advertisementsAlexander Chernavin1-1/+1
With this change, punt received neighbor advertisements instead of drop in order to give other elements of the system an opportunity to handle them. Type: improvement Change-Id: Ie6cde9eebc83e42029967141cb32ebc459fd3680 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2020-06-17docs: add more FEATURE.yaml documentationDave Barach1-0/+15
This patch documents the DNS plugin, vlib packet tracing, vnet feature arcs, and the vppinfra library. Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Idb16ec0593d428ce78fe8404374a823a56b4b420
2020-06-17ip-neighbor: fix MLD hash key using stack pointerBenoît Ganne1-2/+2
Use pointed value (ipv6 address) as hash key instead of pointer value (pointer to ipv6 address on the stack). Type: fix Change-Id: I74a8b6d4bb552b5b344bcb50c8e830700c4ce739 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-06-16interface: add minimal vpp pkt trace for error-dropDave Barach2-8/+125
Provide a minimal trace [ip4/ip6 src/dst address] for dropped pkts when the user specifies "trace add error-drop XXXX", but does not trace pkts from the original input node. This is a wireshark dissector problem. Packets thrown at error-drop may be well-formed, or not. VPP must not crash, no matter what. The minimal trace capture and decode could be enhanced. Anyone interested in doing that must consider all of the corner-cases involved. This version should be at least somewhat useful. Note that "pcap trace drop ..." - and the packet generator - seem like the right tools to use when researching more complex issues. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I961ca133980ffa2a1e5707879a443b21442ed894
2020-06-16virtio: add vhost sw_if_index filter for sw_interface_vhost_user_dumpSteven Luong2-3/+6
The filter sw_if_index was in the API sw_interface_vhost_user_dump. But it was never implemented in the backend. This patch is to add the backend, vat, and custom dump support for the filter. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iaa41a7e11bfbcbb4c60092375e4b0dcf0950077b
2020-06-16gso: fix the udp checksum in testMohsin Kazmi2-13/+8
Type: fix Change-Id: I7005e4763e73f3679c40f94bdab26d439cd23188 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-15vxlan: remove judgement with always trueZhiyong Yang1-27/+15
if ((A | B) == false) it means both A and B are false, so for the following code if (PREDICT_FALSE (!good_udp1)) { if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0) { ... } } if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0) is always true if the code run it. Remove it. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Change-Id: I6bd1e9340c7a00089fc1c9ae49773add832d309e
2020-06-12virtio: interface type based improvementsMohsin Kazmi3-75/+142
Type: improvement Change-Id: I220ea6ab609e3c1628f5210be441d0d5e825a32c Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-12ip: allocate ip4 mtrie pages in htlb memoryDave Barach3-2/+48
No change in default behavior. To use htlb pages for the ip4 mtrie, use the "ip" command-line option "mtrie-hugetlb". Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I5497e426a47200edff2c7e15563ed6a42af12e7f
2020-06-10ip: reassembly: LRU algorithm should eliminate the longest unused nodeszhengdelun2-2/+2
Type: fix Signed-off-by: zhengdelun <xszhengdelun@gmail.com> Change-Id: I3f6240b4c0798f85960acc55a193a0cbf0c67ea4
2020-06-09tap: enable gso/csum offload for tunMohsin Kazmi1-7/+0
Type: improvement Change-Id: I5b9d5ea192776f14a45bf909acc4bef7793521e8 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-09vxlan: fix the inner packet checksum calculationMohsin Kazmi2-4/+101
Type: fix Change-Id: I1da4ace9f3e548af4b5b3373d695e4214c5df2ff Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-09misc: add code styling for vxlan encap and vxlan_packet filesMohsin Kazmi2-256/+282
Type: style Change-Id: Id363ccd0e51c61388fb45ef10685929f629cccbd Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-06-08tcp: improve rtt estimation with rate samplingFlorin Coras1-18/+29
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I25043da84b2f2b3f37024ecfedac535df3004ea5
2020-06-08vxlan: Fixed checksum caclculation offsetVladimir Isaev6-72/+44
VXLAN uses csum_offload for IPv6 packets. But without gso node we have csum calculated only for inner packet. This patch adds support for outer header csum calculation. Checksum for inner packet should be calculated before interface-output node (for example in vxlan node). Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
2020-06-07fib: fix multiple dpo pool expand casesDave Barach6-7/+76
Add dpo_pool_barrier_sync/release, use them to clean up thread-unsafe pool expansion cases. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I09299124a25f8d541e3bb4b75375568990e9b911
2020-06-05fib: fix adj pool expand casesDave Barach1-1/+24
adj_alloc (...) is not thread safe when the adj pool or combined counter vectors expand. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I55710de6ecc083b7434e11798659cca9250c9131
2020-06-04fib: add barrier sync, pool/vector expand casesDave Barach1-1/+25
load_balance_alloc_i(...) is not thread safe when the load_balance_pool or combined counter vectors expand. Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I7f295ed77350d1df0434d5ff461eedafe79131de
2020-06-01ip: fix IPv6 mask to prefix length conversionAndreas Schultz1-10/+5
make sure we don't pass a 0 (zero) to log2. Type: fix Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com> Change-Id: Ib3386ad4686835d3836f48294cee4058e897847a
2020-05-29bonding: Revert adjust link stateMatthew Smith1-20/+3
This reverts commit 9121c415a91904be50071ec55143d9c89b2f1b91. Reason for revert: causes deadlock with multiple worker threads Type: fix Change-Id: Icf3d6d343d99d887abacbaa03acbf04d4628514e Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-05-29fib: Safe adj walkNeale Ranns1-8/+15
Type: fix the hash walk does not give the same guarantees as the bihash so walk in a safe manner. Change-Id: Idfe48c3a84ab3a341d887f7d196bc81ba34ae8b0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-05-29gso: fix flag for inner headerMohsin Kazmi1-2/+3
Type: fix Change-Id: Ic3fc488521636f7f7c9402a20db45fdb599adaae Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-29docs: Minor updates to feature.yaml filesJohn DeNisco2-6/+8
Type: docs Signed-off-by: John DeNisco <jdenisco@cisco.com> Change-Id: Iba106d33d34766b91e46980e7237fbdfc3710b8b
2020-05-29misc: ipfix-export unformat u16 collector_port fixElias Rudberg3-1/+20
Use %U and unformat_udp_port instead of %u for unformat() call for u16 collector_port number in set_ipfix_exporter_command_fn() to avoid corruption of other variables which can happen if unformat() with %u is used with a 16-bit variable. This avoids crash due to corrupted fib_index value. Type: fix Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net> Change-Id: Id54273fcc458a7f9c5aa4025aa91711f160c1c1a
2020-05-28tap: fix rx queue indexMohsin Kazmi1-1/+2
Type: fix Change-Id: I5601bdeb47d08118476ff7bd29435d2c1dba34b9 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-05-27ipsec: Add/Del IPSec SA is not MP safeNeale Ranns1-7/+0
Type: fix we can probably do better, but for now this is needed Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I07161f5ac07a70a0e6db6608ba31659d9bc2c9ed
2020-05-27ethernet: fix DMAC check and skip unnecessary ones (VPP-1868)John Lo8-31/+104
Fix and optimize DMAC check in ethernet-input node to utilize NIC or driver which support L3 DMAC-filtering mode so that DMAC check can be bypassed safely for interfaces/sub-interfaces in L3 mode. Checking of interface in L3-DMAC-filtering state to avoid DMAC check require the following: a) Fix interface driver init sequence for devices which supports L3 DMAC-filtering to indicate its capability and initialize interface to L3 DMAC-filtering state. b) Fix ethernet_set_flags() function and its associated callback flags_change() functions registered by various drivers in interface infra to provide proper L3 DMAC filtering status. Maintain interface/sub-interface L3 config count so DMAC checks can be bypassed if L3 forwarding is not setup on any main/sub-interfaces. Type: fix Ticket: VPP-1868 Signed-off-by: John Lo <loj@cisco.com> Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
2020-05-27ip: reassembly: use correct IP header offsetKlement Sekera1-2/+7
Type: fix Ticket: VPP-1883 Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Icf50a645e114fa3b7bd974f8c82f5ceebfcedcd7
2020-05-27bonding: adjust link state based on active slavesMatthew Smith1-3/+20
Type: improvement Bond link state is being maintained inconsistently. It is initially set to up. If the bond interface admin state is set to down, the link state is set to down. If the bond interface admin state is set to up, the link state is only set to up if there are active slave interfaces at that point. If slaves become active at some later time, it does not get updated. Its next chance to be updated is the next time the bond interface is set to admin up. To address this, do not set the link state to up after creating a bond. Adjust the link state as slave interfaces are attached or detached based on whether the bond is getting its first active slave or losing its last one. Unit test added to verify correct maintenance of link state. Change-Id: I31f17321f7f0e727e1ab1e01713423af6566dad9 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-05-26fib: Fix interpose source reactivateNeale Ranns1-0/+14
Type: fix when the interpose is on an adj-fib and the cover is removed the adj source will not install. this lead to no path list being found for the interpose source and a crash. pick a drop path list in this case. Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ied217da043926c913657080f5ffb151201225d23
2020-05-26fib: Use basic hash for adjacency neighbour tableNeale Ranns1-82/+42
Type: improvement a bihash per-interface used too much memory. Change-Id: I447bb66c0907e1632fa5d886a3600e518663c39e Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-05-25tcp: fix sack block validation on wrapFlorin Coras1-1/+3
Type: fix Fixes: 487507f Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ia9813ae09d14111dc8edac0fa6ab082e13ab6e2e
2020-05-25api: add new stream message conventionOle Troan1-0/+1
Instead of having to wrap dump/detail calls in control ping, send details messages in between a normal reply / request pair. As expressed in the below service statement. Example: service { rpc map_domains_gets returns map_domains_get_reply stream map_domain_details; }; define map_domains_get { u32 client_index; u32 context; u32 cursor; }; define map_domains_get_reply { u32 context; i32 retval; u32 cursor; }; To avoid blocking the main thread for too long, the replies are now sent in client message queue size chunks. The reply message returns VNET_API_ERROR_EAGAIN when there is more to read. The API handler must also include a "cursor" that is used to the next call to the get function. API handler example: REPLY_AND_DETAILS_MACRO (VL_API_MAP_DOMAINS_GET_REPLY, mm->domains, ({ send_domain_details (cursor, rp, mp->context); })); The macro starts from cursor and iterates through the pool until vl_api_process_may_suspend() returns true or the iteration reaches the end of the list. Client Example: cursor = 0 d = [] while True: rv, details = map_domains_get(cursor=cursor) d += details if rv.retval == 0 or rv.retval != -165: break cursor = rv.cursor or the convenience iterator: for x in vpp.details_iter(vpp.api.map_domains_get): pass or list(details_iter(map_domains_get)) Change-Id: Iad9f6b41b0ef886adb584c97708dd91cf552749e Type: feature Signed-off-by: Ole Troan <ot@cisco.com>
2020-05-24tcp: track buffer alloc failuresFlorin Coras2-3/+21
Reported as part of "show tcp stats" Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I499ab4e41d13aaf1a0d060e37f09087e63d09567
2020-05-24ipsec: fixed chaining ops after add footer and icvPiotrX Kleski1-8/+11
In case there is no free space in first buffer for ICV and footer, additional buffer will be added, but esp_encrypt will stay in single buffer mode. The issue happens for the following payload sizes: - TCP packets with payload 1992 - ICMP packets with payload 2004 This fix moves the single/chained buffer ops selection to after esp_add_footer_and_icv call. Type: fix Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Change-Id: Ic5ceba418f738933f96edb3e489ca2d149033b79
2020-05-21vcl: support connected udp listensFlorin Coras2-0/+2
Request connected udp listener behavior by setting VPPCOM_ATTR_SET_CONNECTED attribute with vppcom_session_attr Type: feature Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Iba95155c0f41cea8c6e1a4263946270d49c213ac
2020-05-21ip: Dual loop error in midchain chksumNeale Ranns1-1/+1
Type: fix Change-Id: Idf7c80b7d81f796bd0512bca4276bcfcf2af241a Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-05-19vppinfra: refactor mpcap.hDave Barach1-0/+113
vppinfra source files MUST NOT #include <vlib/vlib.h>, <vnet/vnet.h> or similar. Move mpcap_add_packet(...), mpcap_add_buffer(...) to a new file: src/vnet/mpcap.h. Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id517aef6fe49b618f853ce32940b91ba45a1e60d
2020-05-19interface: fix interface rx mode config APIJakub Grajciar1-2/+4
Swap byte order for fields of type vl_api_rx_mode_t. Ticket: VPP-1871 Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ia1745257b57209d41661d38067e0dd7618f9a9b9 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> (cherry picked from commit aefcd1a3579ec2c93f606b151d563d87ea211387)
2020-05-17ip6-nd: correct set-ip6-nd-proxy CLI short_helpIgnas Bacius1-1/+1
Type: fix Signed-off-by: Ignas Bacius <ignas@noia.network> Change-Id: Id99a15272f6f12a724a4cfd9de461f1aa6a6a634
2020-05-16l2: L2/L3 mode swicth cleanup and l2-patch fixJohn Lo4-31/+16
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node as it is no longer necessary. L2 patch should use sw_if_index for device feature enable/disable. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
2020-05-16misc: fix typo in set-ipfix-exporter CLI short_helpIgnas Bacius1-1/+1
Type: fix Change-Id: Id6687780b9a740323bd2eef58447864e70dc0235 Signed-off-by: Ignas Bacius <ignas@noia.network>
2020-05-15misc: removed executable bits from source filesRay Kinsella15-0/+0
Identified and removed executable bit from source files in the tree. find . -perm 755 -name *.[ch] -exec chmod a-x {} \; Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I00710d59fcc46ce5be5233109af4c8077daff74b
2020-05-15session: track detached listener segment managersFlorin Coras4-7/+77
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Iae734a526d2e7befd9738054d028df0062b67000
2020-05-14tcp: fix bogus time update due to missing castFlorin Coras1-1/+2
Type: fix Seems clang needs explicit casting to u64 of u64 and f64 multiplication before truncating to u32 Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ib0d7a33d4c5e68577e401e854fc3e55e0723da93
2020-05-14lisp: API cleanupOnong Tayeng3-41/+6
Removing the comments around eid_type which seem to have been overlooked by the original patch https://gerrit.fd.io/r/c/vpp/+/24663. Type: refactor Signed-off-by: Onong Tayeng <otayeng@cisco.com> Change-Id: I48e1993cf8869cb32e159d1956f3ec1e5943e33f
2020-05-14nat: ED: store both thread&session idx in hashKlement Sekera1-1/+1
By storing thread and session index in hash table we are able to skip multiple hash lookups in multi-worker scenario, which were used for handoff before. Also, by storing sesion index in vnet_buffer2, we can avoid repeating the lookup after handoff. Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I406fb12f4e2dd8f4a5ca5d83d59dbc37e1af9abf
2020-05-14ip: fix interface ip address del sw_if_index checkyedg4-6/+27
Type: fix Signed-off-by: Ye donggang <yedg@wangsu.com> Change-Id: Ia9f72ff2be455ecd4ff3d16e884c5a50f9df69fe
2020-05-13sr: fix srv6/srv6-ad/srv6-as promisc mode switchJohn Lo1-16/+10
Calling ethernet_set_flags() to switch interface to/from promiscuous mode must use use hw_if_index instead of sw_if_index. Type: fix Signed-off-by: John Lo <loj@cisco.com> Change-Id: I72da286b913893227e32193ee11fbbc56e04804d