Age | Commit message (Collapse) | Author | Files | Lines |
|
Added APIs want_l2_macs_events and l2_macs_event to allow an API
client to receive notification events from VPP for MAC learned
or aged in L2FIB. Only one API client is allowed for L2 MAC events.
The want_l2_macs_events API allow caller to specify MAC learn
limit, event scan delay and max number of MACs that can be included
in a event message. These parameters should be choosen properly as
to not have too many MAC events sent by VPP and overwhelm the API
share memory. They can all be left as 0's so VPP will setup reasonable
defaults which are: 1000 learn limit, 100 msec scan delay and 100
MACs per event message.
If want_l2_macs_events is never called, VPP learning and aging
should behave as before except that MAC entries provisioned by API
or CLI will not be aged, even if it is not set as static_mac. These
non static MACs, however, can be overwritten by MAC learning on a
MAC move as a leared MAC. Only learned MACs are subject to aging.
Change-Id: Ia3757a80cf8adb2811a089d2eafbd6439461285c
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I38e1c6a6b033e12ef3f4345a1deff73fa4adbea0
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
VPP crash when trying to send arp message or to probe neighbor over
interface with IP address but without hw address (local0 and tunnels
- vxlan, gre, ...)
Change-Id: I08a1c97d3ea913fc11b2886cf73b2ccc31356664
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I5e04d618c4b4987edc64f6d82fd0a81b8362dbb0
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
- Make tcp output buffer allocation macro an inline function
- Use per ip version per thread tx frames for retransmits and timer
events
- Fix / parameterize tcp data structure preallocation
- Add a couple of gdb-callable show commands
- Fix local endpoint cleanup
Change-Id: I67b47b7570aa14cb4634b6fd93c57cd2eacbfa29
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Also fixes csum computation for lisp control plane 4o6 encapsulated control
messages.
Change-Id: I991e0b5c0d16dc51e0b5bdc79e1d752270b34765
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I655f41878ca3595681d0255782b0faba01c9824b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Idb97e573961b3bc2acdeef77582314590795f8c3
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: Icea1dff33aae35a85ae1a7ed1900a0abb3fe4b6b
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: If608bbc7f4c8b0d5c3a237098a20279e407c82d3
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I4c3b22c333b052d068f1a5977e9d4e38471693d6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3c697615698b622a2484df43fb78980be9b7ae98
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
- Cleanup half-open connections and timers on the right thread
- Ensure half-open connection and transport endpoint pools are thread safe
- Enqueue TX events to the correct vpp thread in the builtin client
- Use transport proto in transport connections instead of session type
Change-Id: Id13239a206afbff6f34a38afa510fe014e4b2049
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- the echo_reply_node is now notifying the cli process on the main thread/vlib_main
- the timestamp for the icmp reply is now acquired in the echo_reply_node and not in the cli process to avoid an off by 10ms error (see 【vpp-dev】delay is error in ping with multi worker thread)
Change-Id: I21d37002b0376b4f2ccab08d8f04c2f2944b9b39
Signed-off-by: Mohammed Hawari <mhawari@cisco.com>
|
|
Node function pointer was not set on all node runtimes causing crash if
new interface is different type.
Change-Id: I4661fe883befc6cd3fc6dfc14fd44f6fa5faf27c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
(VPP-916)
The syntax for debug vhost-user is
debug vhost-user <on | off>
However, currently the code does not reject the invalid command such as below
debug vhost-user
debug vhost-user on blah
debug vhost-user off blah
The fix is to enforece the correct syntax and reject the command when invalid
option is entered.
Change-Id: I1a04ae8ddb6dd299aa6d15b043362964e685ddde
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 6a4de2764d9e6cadf36af824dddb3f33c2d6dc7e)
|
|
Change-Id: I16c3f5a97c45e504eec94ce131e854d7da9cd0e3
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ica99e8cb919fca6b069c37c969d60e8ccc2c6bf9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
added span feature nodes for l2-input / l2-output
Change-Id: Ib6e0ce60d0811901b6edd70209e6a4c4a35cd8ff
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Simplify L2 output feature infra to unify with L2 input feature
infra using the newly improved feature bitmap mechanism.
Updated all L2 features to use the more efficient infra functions.
Change-Id: If8f463826b0af0717129befe92a27ea8cfc40449
Signed-off-by: John Lo <loj@cisco.com>
|
|
- Increment rcv_nxt for fin packets
- Call tcp_segment_rcv only if buffer has data
- Parse rcv opts before deleting half-open connection
- Fix initial rcv_wnd
- Improved event logging
Change-Id: I9b83c04f432c4cec832c480b03e534deff02c3b1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3790739683c6090ffb2aefb4758bd4275856c09a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ib5ad1369678389534426902ce698bccf7a6d9ec2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I27d7cb4c4e142f29a0c3c3ff85dd1f581970abfc
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Id9737b6aa2b6fe3032f4627dfdbd2ea728cc3fb1
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
According to Maciek, the easiest way to leverage the csit "performance
trend" job is to actually merge the patch once verified. Manual
testing indicates that the patch improves l2 path performance. Other
use-cases are TBD. It's possible that we'll need to back out the patch
depending on what happens.
Change-Id: Ic0a0363de35ef9be953ad7709c57c3936b73fd5a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Idf4f8b02337551670d6b7ce1a03799de9c53d19a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Paths are given a preference, lowest value is 'best'. Only paths that are up are up contribute to fprwarding - that's unchanged. What's new is that of the path's that re up only those that have the best preference contribute. A poor man's primary and backup. It's not true primary/backup function because the FIB must converge before the lower preference paths are used.
Change-Id: Ie4453c4a7b1094c6c2b51fe1594b8302103bb68e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
the existing seeting of client_id to a VPP version number was unused and so overridden
Change-Id: If9ebea936336f1fcca8d07e67186c95f8f8f0ccd
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I63c59e3c13859b51999d283774f7783ef0a6a5ed
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I2cb6ce4e29813f6602b14e6e61713fb381fbcef8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Fixes a coverity warning, albeit not a serious issue.
Change-Id: I0fa28342ac4b222c1ba7f7f2befde455fd42d682
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- Fix rx sack option parsing
- Add session sack scoreboard tracing and replaying
- Add svm fifo tracing and replaying
- Scoreboard/svm fifo ooo segment reception fixes
- Improved overall debugging
Change-Id: Ieae07eba355e66f5935253232bb00f2dfb7ece00
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I123eccea98abafeb31f25d2a162501e2eded60d4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
To save space in the first cacheline following is changed:
- total_length_not_including_first_buffer moved to the 2nd cacheline.
This field is used only when VLIB_BUFFER_TOTAL_LENGTH_VALID and
VLIB_BUFFER_NEXT_PRESENT are both set.
- free_list_index is now stored in 4bits inside flags, which
allows up to 16 free lists. In case we need more we can store index
in the 2nd cachelin
Change-Id: Ic8521350819391af470d31d3fa1013e67ecb7681
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic31b388cb972fb5f8a3fc42a5412401c3ee3e487
Signed-off-by: Christophe Fontaine <christophe.fontaine@enea.com>
|
|
Cleanup mapping of interface output node for the l2-output node
when interface is configured to L2 or L3 modes. The mapping is
now always done in the main thread as part of API/CLI processing,
instead of initiate mapping in the forwarding path which can be
in the worker threads.
Change-Id: Ia789493e7d9f5c76d68edfaf34db43f3e3f53506
Signed-off-by: John Lo <loj@cisco.com>
(cherry picked from commit bea5ebf205e0bec922bf26c6c1a6a9392b4cad67)
|
|
Change-Id: Id117e219146d9994340fb38c00233ea67db8929b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Data structure preallocation.
- Input state machine fixes for mid-stream 3-way handshake retries.
- Batch connections in the builtin_client
- Multiple private fifo segment support
- Fix elog simultaneous event type registration
- Fix sacks when segment hole is added after highest sacked
- Add "accepting" session state for sessions pending accept
- Add ssvm non-recursive locking
- Estimate RTT for syn-ack
- Don't init fifo pointers. We're using relative offsets for ooo
segments
- CLI to dump individual session
Change-Id: Ie0598563fd246537bafba4feed7985478ea1d415
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I84cea7530b01302a0adeef95b4924f54dc2e41ec
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Currently, buffer index is calculated as a offset to the physmem
region shifted by log2_cacheline size.
When DPDK is used we "hack" physmem data with information taken from
dpdk mempool. This makes physmem code not usable with DPDK.
This change makes buffer memory start and size independent of physmem
basically allowing physmem to be used when DPDK plugin is loaded.
Change-Id: Ieb399d398f147583b9baab467152a352d58c9c31
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
LLDP packets are dropped at interface output node if each slave's link
is configured as the LLDP interface. The admin state is configured and
managed by the bonded interface, so slave link's state is down by default.
The checking for the admin state UP should be ignored for the slave link.
Change-Id: I06ca250f42fcb8cc50e0ea3a3817a2c5b56865df
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
a double version of is_tagged, uses "free lanes" in _mm_cmpeq_epi16
to check a second tag
this code was not yet tested for performance
Change-Id: I640017e1cc75c85a33d196ee911a7e4a512d9849
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ieb5522cd5cb27bcbce808d4cd6df5248716da43c
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I4a529dfab5d0ce6b0bbc0ccbbd89c6b109dbf917
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I56bf6b46527f9465d78ed7c08b6e216e50c135ec
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
show interface rx-placement somtimes displays the wrong interface names.
This happens when there exists subinterfaces in VPP.
The problem is due to the function show_interface_rx_placement_fn is calling
format_vnet_sw_if_index_name with hw_if_index instead of sw_if_index.
VPP has the concept of sw_if_index and hw_if_index. Each serves a different
purpose. When there is no subinterfaces, both hw_if_index and sw_if_index
may happen to have the same value. But don't count on it. When the API calls
for sw_if_index, we must pass the sw_if_index although the hw_if_index has
the same type which the compiler does not catch. Passing hw_if_index for an
API which requires sw_if_index may have an unpredictable result such as
described in the VPP-894 and sometimes it may even crash if the particular
index does not exist.
Change-Id: I76c4834f79b88a1c20684fcba64f14b2da142d77
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit bafa4d048439fdbcc0bd577e43a2784d1b89bfc5)
|
|
If a bonded interface is in active-backup mode and configured with
IPv4 and/or IPv6 addresses, on slave interface link up/down, send
a GARP packet if configured with an IPv4 address and an unsolcited
NA if configured with an IPv6 address. These packets can help with
faster route convergence in the next hop router/switch.
Change-Id: I68ccb11a4a40cda414704fa08ee0171c952befa2
Signed-off-by: John Lo <loj@cisco.com>
|
|
Add API methods to configure LLDP and set interface to enable/disable.
Also add port description TLV for LLDP.
Change-Id: Ib959d488c2ab8a0069f143558871f41fcc43a5d3
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
traffic (VPP-892)
When stacking DPOs the VLIB graph is also updated to add the edge between the nodes, if this edge does not yet exist. This addition should be done with the workers stopped.
Change-Id: I327e4d7d26f0b23eb280f17e4619ff2093ff7940
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit c02bd03ddf5eec9e9c79811360685f13e4ba8ee1)
|