summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2017-03-07In-band OAM active probe (VPP-471)AkshayaNadahalli3-32/+63
Change-Id: Icf0ddf76ba1c8b588c79387284cd0349ebc6e45f Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
2017-03-07fix uninitialized ip6 keys within session.cGabriel Ganne1-0/+8
fix for functions: - stream_session_lookup_listener6 - stream_session_lookup6 - stream_session_lookup_transport6 - stream_session_connect_notify eg. ~/vpp/build-data/../src/vnet/session/session.c: In function 'stream_session_lookup_listener6': ~/vpp/build-data/../src/vnet/session/session.c:222:17: error: 'kv6.key[3]' is used uninitialized in this function [-Werror=uninitialized] session_kv6_t kv6; ^ ~/vpp/build-data/../src/vnet/session/session.c:222:17: error: 'kv6.key[2]' is used uninitialized in this function [-Werror=uninitialized] ~/vpp/build-data/../src/vnet/session/session.c:222:17: error: 'kv6.key[5]' is used uninitialized in this function [-Werror=uninitialized] ~/vpp/build-data/../src/vnet/session/session.c:222:17: error: 'kv6.key[4]' is used uninitialized in this function [-Werror=uninitialized] Change-Id: I221cafbaf4effa43662ffcc7bf5f9581e28f9db9 Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
2017-03-07make per-adj counters configurableNeale Ranns4-61/+175
Change-Id: Ifdd2b204ecf7d855f1269c11224b9c825311904d Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-07Fixing loadbalancing over ECMP for recursive routesAkshayaNadahalli2-12/+10
Change-Id: Ibe1734aeb94bc17cd8d8bc6f35ca7b780aaa9599 Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
2017-03-06ioam: manycast using iOAM and SR (VPP-628)Shwetha Bhandari5-78/+172
Change-Id: I6d2afda991d771fb4a89fc3f6544f8e940a9b9f0 Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
2017-03-06BFD: documentationKlement Sekera11-91/+526
Change-Id: I06a23d24340c5527f3848177d2178bf3e55f7614 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-06Remove unused multicast fields from vnet_buffer_tNeale Ranns1-10/+0
Change-Id: I8db55443c0beb33a89520ab3167f703f8646ec9e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-06features: take device-input buffer advance value directlyDamjan Marion6-34/+40
Change-Id: Ifac7d9134d03d79164ce6f06ae9413279bbaadb3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-06BFD: drop rpc call if packet doesn't match sessionKlement Sekera1-1/+1
In a very unlikely scenario, during which a session is removed and replaced with a different session sharing the same session index, while a packet is in-flight during RPC call, drop that packet. Change-Id: If1c4a77fc2ab460bae2435db066a133185b98747 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-06BFD: remove unneeded codeKlement Sekera1-15/+0
Change-Id: I0371e8e3c94bb793e3c64d5f51aaebf19dddc4b4 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-06span: wrong destination interface in tracingPavel Kotucek1-28/+18
Change-Id: I9bea397e50fff4211c6e1e31503829e4dd16be42 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-03-06Quad loop interface-output nodeDamjan Marion1-13/+48
Change-Id: I0c24d9af90241083ae56b1d52239d2d55e70b65e Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-04DHCPv6 - Be consistent with the use of MFIB index as the RX FIB index for ↵Neale Ranns4-20/+78
DHCPv6. For the same table ID, the unicast-FIB index is not necessarily the same value as the multicast-FIB index, since features (like LISP, SR) can create unicast-tables, and thus affect only the index of the unicast FIBs Change-Id: Ibfa334d7eda822f742c241b7ce69a6271b4753a9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-04Cleanup URI code and TCP bugfixingFlorin Coras15-143/+537
- Add CLI/API to enable session layer, by default it's disabled - Improve rcv wnd computation - Improvements to tx path - URI code cleanup - Builtin test tcp server - Improve src port allocation Change-Id: I2ace498e76a0771d4c31a8075cc14fe33d7dfa38 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-04Evolving SRv6 (Segment Routing for IPv6)Pablo Camarillo16-5227/+7599
Implements: 1.- SR Policies with several (weighted) SID lists 2.- Binding SID 3.- SR LocalSIDs with support for the following functions - End - End.X - End.DX6 - End.DX4 - End.DX2 - End.DT6 - End.DT2 - End.B6 - End.B6.Encaps 4.- SR Steering policies (to steer a traffic through an SR Policy) - Support for IPv6 traffic (IPv6 Encapsulation / SRH insertion) - Support for IPv4 traffic (IPv6 Encapsulation) - Support for L2 traffic (T.Insert / T.Encaps) 5.- Doxygen documentation 6.- Framework (APIs) to allow the definition of new SR LocalSID behaviors by means of plugins 7.- Sample SRv6 LocalSID plugin Change-Id: I2de3d126699d4f11f54c0f7f3b71420ea41fd389 Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
2017-03-03Implement a loopback instance allocation scheme.Jon Loeliger2-12/+117
To support creating loopback interfaces with a specific instance number, a new CREATE_LOOPBACK_INSTANCE API call with flag is_specified and value user_instance is introduced. Presumably the existing CREATE_LOOPBACK API message will be obsoleted and revmoved. The VAT cli commands can now mention and format the new field as 'instance %d' data. If no instance number is named, the old call CREATE_LOOPBACK is used to maintain backward compatibility. However, if the instance is named, the new CREATE_LOOPBACK_INSTANCE message will be used. Both the dynamically allocated and user-requested instance number are tracked in a bitvector. If is_specified is 0, the next free instance will be used.. A request for a specific instance number will be granted if it is available. On error, the value ~0 is returned. Change-Id: I849815563a5da736dcd6bccd262ef49b963f6643 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-03-03VPP-651: Ensure sw_if_index to node mapping for L2 output path is only done ↵Andrew Yourtchenko3-3/+17
via l2output_main.next_nodes Before this commit, several output features that happen to be the last in the list of features to be executed, send the packets directly to <interfaceName>-output. To do this, they use l2_output_dispatch, which builds a list of sw_if_index to next index mappings. When interfaces are deleted and the new interfaces are created, these mappings become stale, and cause the packets being sent to wrong interface output nodes. This patch (thanks John Lo for the brilliant idea!) adds a feature node "output", whose sole purpose is dispatching the packets to the correct interface output nodes. To do that, it uses the l2output_main.next_nodes, which is already taken care of for the case of the sw_if_index reuse, so this makes the dependent features all work correctly. Since this changes the packet path, for the features that were always the last ones it has triggered a side problem of the output feat_next_node_index not being properly initalized. These two users are l2-output-classify node and the output nodes belonging to the acl-plugin. For the first one the less invasive fix is just to initialize that field. For the acl-plugin nodes, rewrite the affected part of the code to use feat_bitmap_get_next_node_index since this is essentially what the conditional in l2_output_dispatch does, and fix the compiler warnings generated. This fix was first made in stable/1701 under commit e7dcee4027854b0ad076101471afdfff67eb9011. Change-Id: I32e876ab1e1d498cf0854c19c6318dcf59a93805 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2017-03-03IPv6 RA improvementsNeale Ranns2-157/+123
1) tests for RA options 2) memleaks deleteing a ip6_radv_info_t 3) MLD prefix code refactoring Change-Id: I34db103994bd8fbdbbec50b202d72770dd145681 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-03Changing the IP table for an interface is an error if the interface already ↵Neale Ranns7-66/+110
has an address configured (VPP-601) Change-Id: I311fc264f73dd3b2b3ce9d7d1c33cd0515b36c4a Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-02Clean up binary api message handler registration issuesDave Barach7-164/+2
Removed a fair number of "BUG" message handlers, due to conflicts with actual message handlers in api_format.c. Vpp itself had no business receiving certain messages, up to the point where we started building in relevant code from vpp_api_test. Eliminated all but one duplicate registration complaint. That one needs attention from the vxlan team since the duplicated handlers have diverged. Change-Id: Iafce5429d2f906270643b4ea5f0130e20beb4d1d Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-02bridge domain: fix members reordered when removingEyal Bari1-1/+1
since adding support for multicast vxlan flooding (flood class tunnel master) correct flood functionality depends on the order of the memebers vector solved by using vec_delete instead of vec_del1 which swaps members before deleting the last element Change-Id: I234f218d49172b4142c567db9699a5cb274e4a66 Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-03-02Remove the unused VRF ID parameter from the IP neighbour Add/Del APINeale Ranns1-2/+0
Change-Id: Icf0d72f6af1f98c86f78e586c354515ac69804aa Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-03-02Fix LISP Coverity warningFlorin Coras1-1/+1
Change-Id: Id1c3832609859ed004bacba0ced0d07dafd6c409 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-02VPP-648: CLI Memory leak with invalid parameterBilly McFall3-29/+88
After VPP-635 was merged, did one more pass. While the code was waiting to be merged, a few changes were merged to master with the same issue. This is a few additional changes addressing the same issue. See VPP-635. Change-Id: I7abeac5c260c1e2e9d9d318fd1aae24cd6932efc Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-03-02BFD: command line interfaceKlement Sekera10-168/+1080
Implement command line interface to the BFD binary APIs. Add corresponding unit tests. Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion30-11713/+11
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01VPP-598: tcp stack initial commitDave Barach59-447/+12496
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-01devices: vnet_get_aggregate_rx_packets should not be dpdk specificDamjan Marion9-44/+58
Change-Id: I1152db4b7d1602653d7d8b2c6cb28cf5c526c4ca Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28dpdk: retire support for dpdk 16.07Damjan Marion5-58/+3
Change-Id: I8585552c026415340fe9fd0458cb8450da3c4ae2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28Clear L2 output config on interface mode change to L3 (VPP-651)John Lo1-4/+11
With VPP-651, the L2 output config with L2-tag rewrite was not cleared when a sub-interface is deleted. Subsequently, when the same sw_if_index was reused for another interface, the L2 output config with L2-tag rewrite remained on the new interface. On deleting a (sub-)interface which is in L2 mode, it will be changed to L3 mode first to clear any L2 config. The L2 to L3 mode change path did address L2 input config cleanup. It is now fixed to also clear L2 output config. Change-Id: I3352a89d92e1b27340a5adcf75bbaa01a5050c29 Signed-off-by: John Lo <loj@cisco.com>
2017-02-28vlib: add buffer cloning supportDamjan Marion4-57/+74
Change-Id: I50070611af15b2b4cc29664a8bee4f821ac3c835 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-27BFD: disable debug printsKlement Sekera1-1/+1
Change-Id: I356581f4bdf47b9610b9e50f4f8db9a1510872a7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-27vlib: add VLIB_BUFFER_EXT_HDR_VALID flagDamjan Marion3-5/+2
Change-Id: If56c66dd12eded1cc997087de5fd1b975766c4e2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-27Add GPE CLI/API for setting encap modeFilip Tehlar7-4/+205
Change-Id: Id89e23fb5d275572b2356c073dfa0f55719e1a76 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-27fix:vxlan mcast adj - added as ucast dpo adjEyal Bari1-1/+1
Change-Id: Ic2447313075cd46f265202dffaaac894f48ddf6d Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-02-26BFD: echo functionKlement Sekera8-318/+864
Change-Id: Ib1e301d62b687d4e42434239e7cd412065c28da0 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-25Add NSH to GPE decap pathFlorin Coras5-20/+56
Change-Id: I97681322fa9ca81736100b4d32eab84868886c7b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-25MFIB: changes to improve route add/delete performanceNeale Ranns3-7/+12
Change-Id: I063d85200d12b09545ae1c373c7fc69112ae3b34 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24FIB: 1) fix pool realloc during prefix export. 2) don't walk off the end of ↵Neale Ranns3-7/+31
the path-extension vector Change-Id: I8bd8f6917ace089edb1f65bd017b478ee198c03f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24VPP-650: handle buffer failure in vlib_buffer_copy(...)Dave Barach3-9/+53
Change-Id: I6aac48d780fcd935818221044eae50067f225175 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-24Fixed QAT device binding and device unbinding when vpp package is removedRadu Nicolau1-1/+1
Change-Id: I35ad6a42093cad0945df1df09a39c63c4560dce6 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-02-24MFIB memory leak. free the per-source interface hashNeale Ranns2-1/+3
Change-Id: I0ccb337eb0ed50ccc64193533cd816f6e36e6db5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24VPP-279: Document changes for vnet/vnet/devicesBilly McFall2-100/+617
Add doxygen documentation for dpdk CLI commands. Outside of adding documentation to the CLI Commands, modified the CLI code as follows: * The "set dpdk interface placement" command allows the user to move interface/queues to a different thread. But there is only a subset of threads that are valid. Updated the "show dpdk interface placement" command to display all valid threads, even if all interface/queues have been moved off. Updated the "show dpdk interface hqos placement" the same way. * There is a command to modify the Subport attributes, but no way to display the changes. Added a "Subport" section to the "show dpdk interface hqos" command. * Reworked the "set dpdk interface hqos subport" command. - The current implementation had a local rte_sched_subport_params structure and initialized it to default values, then overwrote with what was input. The side effect of this is that if all the current data is non-default, and a new command is entered with just one attribute, all the remaining attrbutes are getting set back to default under the cover. Very confusing for the user. Updated the code to read the current value and overwrite what has changed. - DPDK does not have a read subport data, so no way query the current applied values. The set command was not updating the local copy that is created at init. Modified the code to store the updated values if the DPDK apply function was successful. - Several functions repeated the same code to get a pointer to the local HQoS data. Added a utility function.get_hqos(..), to perform this action. Did not port other code to use new function. * The "set dpdk interface hqos pktfield" allows the user to set the packet fields required for classifiying the incoming packet. The classification is across three fields (subport, pipe, tc). The command was using 0,1,2 to represent these three fields, but had no explanation regarding these magic numbers. Updated the command to take the three tokens (subport, pipe, tc) for more clarity. For legacy sake, still allow 0,1,2 to be entered. Also updated the "show dpdk interface hqos" command to show these tokens. * The "set dpdk interface hqos tctbl" maps an interface and value 0-63 to a traffic class and queue. The "show dpdk interface hqos" command showed the internal DPDK magic number for traffic class and queue. Updated the show command to display what was input instead of the magic number. * The "show dpdk hqos queue" command always returns zeros by default because RTE_SCHED_COLLECT_STATS is not defined in DPDK. Took me a while to figure out why I wasn't getting values returned. So returned an error message if RTE_SCHED_COLLECT_STATS is not defined instead of zeros. Change-Id: I22b640d668245839ee977ef3602175c61d91d24c Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-02-23Fix vpp built-in version of api_unformat_sw_if_index(...)Dave Barach2-3/+2
Change-Id: I103fe19a1ecbaf3746ec6b957fa1010458cc9fae Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22Fix LISP and ONE crc marcosFilip Tehlar3-11/+26
Change-Id: Icd0dba04d8929456228136d1f25c459bffcc6a7a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall27-429/+1163
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns13-940/+840
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21Add Overlay Network Engine APIFilip Tehlar6-3/+3773
Change-Id: I6b5984df176688f0722a2888e73f05d8ed8b9310 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-21dhcp: multiple additionsNeale Ranns10-645/+787
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21Rename LISP GPE API to GPEFilip Tehlar9-91/+86
Change-Id: I133c55bce46d40ffddabbbf8626cbd3d072522d4 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>