Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
Change-Id: I3bcc8ff1cf0a828ce3ba112694d38e3287d38d8d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Fixes: a84cb715f5a4366dd2f32de18ad92bec566924da
Change-Id: Id448d6ae9cfdd3122e8187121c509412835117c5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
unformat_ip6_mask wasn't accounting for customized field names
when deciding if it managed to parse at least one field.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I26cab4c6828b510e277079628af5115ac43af3ff
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie358b731f8ecb1fcaebd6e79f5ce5c10802c2814
|
|
Type: fix
Change-Id: I4f91175444dec9800d651aa5a5e0472359de63d1
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Based on the comments in the struct, udp_encap_t_ is meant to span 2
cachelines. Due to the 64 bit alignment of dpo_id_t, the struct spanned
3 cachelines. This caused fetching ue_ip_proto to trigger an additional
cache miss. This patch rearranges the ordering of the struct fields
so that udp_encap_t_ only spans 2 cachelines as intended.
before:
(gdb) print (int)&((struct udp_encap_t_*)0)->cacheline1
$8 = 128
after:
(gdb) print (int)&((struct udp_encap_t_*)0)->cacheline1
$1 = 64
Type: fix
Signed-off-by: Vadym Martsynovskyy <vmartsyn@fb.com>
Change-Id: I066c08654d4a8ef3e2d3954e957d4c5d382b209f
|
|
Type: fix
Signed-off-by: Chinmaya Agarwal <chinmaya.agarwal@hsc.com>
Change-Id: I9aa5456bf94356e8702fbfd39b14db4c2e74d3e6
|
|
Short Load/Stores combined with prefetching in the beginning of the loop
place too much pressure on AGUs and memory accesses.
The patch interleaves load/store operations with computational operations
to alleviate the pain point.
vlib_get_buffers is also leveraged.
Redefine u8 dst_and_src[12] instead of dst[6] and src[6] in struct
l2input_trace_t in order to merge two copys into one.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I7d3df7732c476069235e3019c68f0f53bca9637e
|
|
This patch adds the IPSec ESP/AH type flow support
Have tested on E810 with Intel iAVF driver
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I6ab8e69f67c423cc4e33f3c363881a97cdb98c30
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I0b1a1ce085ceb75fe139092e40878566682a7986
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ifeae641ec0aa7de74e33e582234505bf6e28ca87
|
|
Type: fix
Change-Id: I39341f201209931392f315ead5adfddd8b567caf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I92e8e30e4175229e24dd92471016e9095b5cc83e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4f57a776302e11815fcea433ba8cf6724799ff65
|
|
With this change, punt received neighbor advertisements instead of drop
in order to give other elements of the system an opportunity to handle
them.
Type: improvement
Change-Id: Ie6cde9eebc83e42029967141cb32ebc459fd3680
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
This patch documents the DNS plugin, vlib packet tracing, vnet feature
arcs, and the vppinfra library.
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Idb16ec0593d428ce78fe8404374a823a56b4b420
|
|
Use pointed value (ipv6 address) as hash key instead of pointer value
(pointer to ipv6 address on the stack).
Type: fix
Change-Id: I74a8b6d4bb552b5b344bcb50c8e830700c4ce739
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Provide a minimal trace [ip4/ip6 src/dst address] for dropped pkts
when the user specifies "trace add error-drop XXXX", but does not
trace pkts from the original input node.
This is a wireshark dissector problem. Packets thrown at error-drop
may be well-formed, or not. VPP must not crash, no matter what.
The minimal trace capture and decode could be enhanced. Anyone
interested in doing that must consider all of the corner-cases
involved. This version should be at least somewhat useful.
Note that "pcap trace drop ..." - and the packet generator - seem like
the right tools to use when researching more complex issues.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I961ca133980ffa2a1e5707879a443b21442ed894
|
|
The filter sw_if_index was in the API sw_interface_vhost_user_dump. But
it was never implemented in the backend. This patch is to add the backend,
vat, and custom dump support for the filter.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Iaa41a7e11bfbcbb4c60092375e4b0dcf0950077b
|
|
Type: fix
Change-Id: I7005e4763e73f3679c40f94bdab26d439cd23188
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
if ((A | B) == false) it means both A and B are false, so for
the following code
if (PREDICT_FALSE (!good_udp1))
{
if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0)
{
...
}
}
if ((flags1 & VNET_BUFFER_F_L4_CHECKSUM_COMPUTED) == 0) is always
true if the code run it. Remove it.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Change-Id: I6bd1e9340c7a00089fc1c9ae49773add832d309e
|
|
Type: improvement
Change-Id: I220ea6ab609e3c1628f5210be441d0d5e825a32c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
No change in default behavior. To use htlb pages for the ip4 mtrie,
use the "ip" command-line option "mtrie-hugetlb".
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I5497e426a47200edff2c7e15563ed6a42af12e7f
|
|
Type: fix
Signed-off-by: zhengdelun <xszhengdelun@gmail.com>
Change-Id: I3f6240b4c0798f85960acc55a193a0cbf0c67ea4
|
|
Type: improvement
Change-Id: I5b9d5ea192776f14a45bf909acc4bef7793521e8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I1da4ace9f3e548af4b5b3373d695e4214c5df2ff
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: style
Change-Id: Id363ccd0e51c61388fb45ef10685929f629cccbd
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I25043da84b2f2b3f37024ecfedac535df3004ea5
|
|
VXLAN uses csum_offload for IPv6 packets.
But without gso node we have csum calculated only for inner
packet.
This patch adds support for outer header csum calculation.
Checksum for inner packet should be calculated before
interface-output node (for example in vxlan node).
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Ica68429ede4426293769207cd83c791ebe72fe56
|
|
Add dpo_pool_barrier_sync/release, use them to clean up
thread-unsafe pool expansion cases.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I09299124a25f8d541e3bb4b75375568990e9b911
|
|
adj_alloc (...) is not thread safe when the adj pool or combined
counter vectors expand.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I55710de6ecc083b7434e11798659cca9250c9131
|
|
load_balance_alloc_i(...) is not thread safe when the
load_balance_pool or combined counter vectors expand.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7f295ed77350d1df0434d5ff461eedafe79131de
|
|
make sure we don't pass a 0 (zero) to log2.
Type: fix
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: Ib3386ad4686835d3836f48294cee4058e897847a
|
|
This reverts commit 9121c415a91904be50071ec55143d9c89b2f1b91.
Reason for revert: causes deadlock with multiple worker threads
Type: fix
Change-Id: Icf3d6d343d99d887abacbaa03acbf04d4628514e
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
the hash walk does not give the same guarantees as the bihash so
walk in a safe manner.
Change-Id: Idfe48c3a84ab3a341d887f7d196bc81ba34ae8b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Ic3fc488521636f7f7c9402a20db45fdb599adaae
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: Iba106d33d34766b91e46980e7237fbdfc3710b8b
|
|
Use %U and unformat_udp_port instead of %u for unformat() call for
u16 collector_port number in set_ipfix_exporter_command_fn() to
avoid corruption of other variables which can happen if unformat()
with %u is used with a 16-bit variable. This avoids crash due to
corrupted fib_index value.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: Id54273fcc458a7f9c5aa4025aa91711f160c1c1a
|
|
Type: fix
Change-Id: I5601bdeb47d08118476ff7bd29435d2c1dba34b9
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
we can probably do better, but for now this is needed
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I07161f5ac07a70a0e6db6608ba31659d9bc2c9ed
|
|
Fix and optimize DMAC check in ethernet-input node to utilize NIC or
driver which support L3 DMAC-filtering mode so that DMAC check can be
bypassed safely for interfaces/sub-interfaces in L3 mode.
Checking of interface in L3-DMAC-filtering state to avoid DMAC check
require the following:
a) Fix interface driver init sequence for devices which supports L3
DMAC-filtering to indicate its capability and initialize interface
to L3 DMAC-filtering state.
b) Fix ethernet_set_flags() function and its associated callback
flags_change() functions registered by various drivers in interface
infra to provide proper L3 DMAC filtering status.
Maintain interface/sub-interface L3 config count so DMAC checks can be
bypassed if L3 forwarding is not setup on any main/sub-interfaces.
Type: fix
Ticket: VPP-1868
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I204d90459c13e9e486cfcba4e64e3d479bc9f2ae
|
|
Type: fix
Ticket: VPP-1883
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Icf50a645e114fa3b7bd974f8c82f5ceebfcedcd7
|
|
Type: improvement
Bond link state is being maintained inconsistently. It is initially set to
up. If the bond interface admin state is set to down, the link state is
set to down. If the bond interface admin state is set to up, the link
state is only set to up if there are active slave interfaces at that point.
If slaves become active at some later time, it does not get updated. Its
next chance to be updated is the next time the bond interface is set to
admin up.
To address this, do not set the link state to up after creating a bond.
Adjust the link state as slave interfaces are attached or detached
based on whether the bond is getting its first active slave or losing
its last one.
Unit test added to verify correct maintenance of link state.
Change-Id: I31f17321f7f0e727e1ab1e01713423af6566dad9
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
when the interpose is on an adj-fib and the cover is removed the adj
source will not install. this lead to no path list being found for the
interpose source and a crash. pick a drop path list in this case.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ied217da043926c913657080f5ffb151201225d23
|
|
Type: improvement
a bihash per-interface used too much memory.
Change-Id: I447bb66c0907e1632fa5d886a3600e518663c39e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: 487507f
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia9813ae09d14111dc8edac0fa6ab082e13ab6e2e
|
|
Instead of having to wrap dump/detail calls in control ping, send details messages in between a normal
reply / request pair. As expressed in the below service statement.
Example:
service {
rpc map_domains_gets returns map_domains_get_reply
stream map_domain_details;
};
define map_domains_get
{
u32 client_index;
u32 context;
u32 cursor;
};
define map_domains_get_reply
{
u32 context;
i32 retval;
u32 cursor;
};
To avoid blocking the main thread for too long, the replies are now sent in client message queue size
chunks. The reply message returns VNET_API_ERROR_EAGAIN when there is more to read.
The API handler must also include a "cursor" that is used to the next call to the get function.
API handler example:
REPLY_AND_DETAILS_MACRO (VL_API_MAP_DOMAINS_GET_REPLY, mm->domains,
({
send_domain_details (cursor, rp, mp->context);
}));
The macro starts from cursor and iterates through the pool
until vl_api_process_may_suspend() returns true or the iteration
reaches the end of the list.
Client Example:
cursor = 0
d = []
while True:
rv, details = map_domains_get(cursor=cursor)
d += details
if rv.retval == 0 or rv.retval != -165:
break
cursor = rv.cursor
or the convenience iterator:
for x in vpp.details_iter(vpp.api.map_domains_get):
pass
or
list(details_iter(map_domains_get))
Change-Id: Iad9f6b41b0ef886adb584c97708dd91cf552749e
Type: feature
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Reported as part of "show tcp stats"
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I499ab4e41d13aaf1a0d060e37f09087e63d09567
|
|
In case there is no free space in first buffer for ICV and footer,
additional buffer will be added, but esp_encrypt will stay in single
buffer mode.
The issue happens for the following payload sizes:
- TCP packets with payload 1992
- ICMP packets with payload 2004
This fix moves the single/chained buffer ops selection to after
esp_add_footer_and_icv call.
Type: fix
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Change-Id: Ic5ceba418f738933f96edb3e489ca2d149033b79
|
|
Request connected udp listener behavior by setting
VPPCOM_ATTR_SET_CONNECTED attribute with vppcom_session_attr
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iba95155c0f41cea8c6e1a4263946270d49c213ac
|