summaryrefslogtreecommitdiffstats
path: root/src/vnet
AgeCommit message (Collapse)AuthorFilesLines
2018-03-19IGMP pluginJakub Grajciar2-2/+36
- host mode: igmp_listen - API to signal that the host has joined an (S,G) - route mode: igmp_enable - API to enable the reception of host IGMP messages igmp_event - API to report the host join/leave from an (S,G) Change-Id: Id180ec27dee617d33ab3088f5dcf6125d3aa9c8f Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-03-19IPIP: Fix coverity error.Ole Troan1-0/+3
Change-Id: Ia2b3350bf8e2c72eee3f33936ba16dd817c75c72 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-19FIX: Fixed ip6_fib_dump api function response.Dmitry Vakhrushev3-1/+9
Change-Id: I26c5d61bc2f6188bcd4ecac4b5e9385821b0398b Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
2018-03-18Remove unnumbered configuration on interface deleteNeale Ranns6-80/+68
Change-Id: Iae5532c3d53e208831f3b2782242d9e59d367087 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16QoS recording and markingNeale Ranns19-11/+1630
Change-Id: Ie5a50def4ec1e4a3b3404a8b6ab9ec248bc16744 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-16Fix a long-latent bi=0 bug in vlib_buffer_add_dataDave Barach1-2/+2
Change vlib_buffer_add_data() so it interprets ~0 to mean please allocate a new buffer, instead of 0. Fixed a couple of calls to pass ~0 instead of 0. Zero has always been a valid buffer index, we never happened to actually use it until recent buffer allocator changes. The presenting symptom: ASSERT failure when running "make TEST=test_mpls test-debug" Change-Id: Ic909913c1d464b3434d6d47e0c58f978806854d5 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-16IPv6 ND Router discovery control plane (VPP-1095)Juraj Sloboda5-1/+1029
Change-Id: I4b5b60e7c6f618bb935eab1e96a2e79bbb14f58f Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16stats: allow configuring poller delayKlement Sekera2-16/+28
This introduces a startup config option for configuring stats poller delay. Use `stats { interval <seconds> }` to configure the delay at startup. The default value remains unchanged - 10 seconds. Change-Id: If12cb1f7f6f1f8ecfa461561bc77847cdf260388 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-16IPSec: fix IPv6 policy deletingMatus Fabian1-1/+1
Change-Id: I9f487d6033edde09557709f94f97fc8a70246b09 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-16IPv6 ND Router discovery data plane (VPP-1095)Juraj Sloboda4-5/+613
Add API call to send Router Solicitation messages. Save info from incoming Router Advertisement messages and notify listeners. Change-Id: Ie518b5492231e03291bd4c4280be4727bfecab46 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-03-16session: allow local host bindsFlorin Coras1-4/+4
Change-Id: I906bbc5bc75279f210093fb9276db9e35ee44c1f Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-15Update session local address is_ip4 on bind when not globalKeith Burns (alagalah)1-0/+1
Change-Id: I73ddca5a86e83c9f547778828bb49d2bd4675eaf Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-03-15tls: add openssl engineFlorin Coras8-162/+154
Change-Id: I6c215858d2c9c620787632b570950b15274c0df2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-15Add a helper function to fetch vlib node index for already stacked dposVijayabhaskar Katamreddy2-0/+40
Change-Id: Ie07c6f3723312ce88046570dcbe591b72724657b Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
2018-03-14vlib: internal buffer manager reworkDamjan Marion1-3/+2
- buffer_main is no longer part of vlib_main_t - pool of free lists is still part of vlib_main_t - mheap is not used anymore for buffer allocation - simple bitmap bassed buffer alloc scheme is introduced Change-Id: I3e1e6d00e2c8122293ed0a741245eb841315a1ff Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan10-0/+2244
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-14srv6-plugins: fixing documentationFrancois Clad1-0/+7
Change-Id: I72439df585e56b3cbb7051f056fc35cddf0c864b Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-14srv6: minor CLI modificationsFrancois Clad4-15/+14
'sr steer [...] via sr policy [...]' -> 'sr steer [...] via [...]' 'show sr steering policies' -> 'show sr steering-policies' 'clear sr localsid counters' -> 'clear sr localsid-counters' Change-Id: I0efbf38753a4bd0b7fba8cd08250e136e8e55199 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-14Improve l2_macs_events API to provide MAC move informationJohn Lo4-8/+22
Change mac_entry layout in l2_macs_event API message so the MAC entry can be either add, delete or move where the sw_if_index of an existing MAC entry changed. Also added a 8-bit flags field in mac_entry for any future expansion. Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f Signed-off-by: John Lo <loj@cisco.com>
2018-03-14At AF_PACKET socket create, do intf bind before rx ring cfg to avoid ↵Chaoyu Jin1-12/+12
receiving pkts from other interfaces Change-Id: Ie40ee9129edaac717e716b469f4d10f3c29a4932 Signed-off-by: Chaoyu Jin <chjin@cisco.com>
2018-03-13SCTP: data retransmission & snd_space fixMarco Varlese3-4/+88
This patch addresses two things: 1) The data retransmission which needs to be taken care of when the SCTP_TIMER_T3_RXTX; 2) The correct calculation of the amount of data transmittable considered: the local window, the peer window and any data inflight. Change-Id: I2d03a6cb43e4e7770c4910f8547c66e1026aeace Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-13Common form of fib-path reproting in dumpsNeale Ranns8-126/+304
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-13FIB: DVR paths are not considered L3 attachedNeale Ranns1-0/+10
Change-Id: Ie473dca3264b480b007d2eb500aaa557b889c7c1 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-13SCTP: cumulative SACK fixMarco Varlese4-15/+44
A bug was found affecting the cumulative sending of SACK messages. Because the next0 was never assigned to the next_output the SACK message was never leaving the peer. Further, two new flags have been added to distinguish when a peer is AWAITING a SACK message (e.g. DATA is inflight and waiting to be acknowledged). Change-Id: Ibb5a98f7e5fed15cdc76710b74195cac031d59ed Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-12SPAN: Add 'is_l2" flag to DETAILS response messages.Jon Loeliger2-0/+3
Change-Id: I375bb0e663bc082d98a29fb101c653557ddc8f55 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-03-12Remove md5.[ch] from vppinfraDave Barach1-13/+2
Removed the sole use of it from ip6_neighbor.c Change-Id: Ie53cb3b6a3a41ec0917ec2042e5006d0cfaefc01 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-11vnet: l2-classify: prefetch (n+2, n+3) rather than (n+1, n+2) inside dual ↵Andrew Yourtchenko2-10/+10
loop code The dual loop within the L2 classifier processes the (n, n+1) packets, the prefetching was trying to prefetch (n+1, n+2) - thus half of the prefetches were not used - because the next iteration needs (n+2, n+3). Change-Id: I827d20845dbdd0dcdcf463ee25661a7921428992 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-10Move the vnet cdp protocol implementation to a pluginDave Barach6-1569/+0
Add a binary API and debug cli to enable/disable cdp. cdp is disabled by default. Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts1-6/+16
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-03-09MPLS Unifom modeNeale Ranns39-591/+1746
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-08tls: make tls engines pluggableFlorin Coras2-513/+219
- add infra for pluggable tls "engines" - makes mbedtls specific code a plugin Change-Id: I2c5b099e2b69d2be0038e3ef02b208ff907727e7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-07Fix Avoid crash in vnet_delete_sub_interface routineSteve Shin1-1/+2
vnet_get_sw_interface shoud be called after sw_if_index is validated. Change-Id: I36f1d90999c740803386404ba9b32703b659cd54 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-03-07features: extend 'feature node not found' warning messageDamjan Marion1-2/+4
Change-Id: I8f45fdb3865e2e0cbb5162ac622c07fec5e42b9d Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-07packet-generator: use default free listDamjan Marion2-63/+8
Change-Id: I2a34546f9b32edc9bfb86b5492dde34aaef49ccc Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-07tls: enforce certificate verificationFlorin Coras10-124/+212
- add option to use test certificate in the ca chain - add hostname to extended session endpoint fields and connect api parameters. If hostname is present, certificate validation is enforced. - use /etc/ssl/certs/ca-certificates.crt to bootstrap CA cert. A different path can be provided via startup config Change-Id: I046f9c6ff3ae6a9c2d71220cb62eca8f7b10e5fb Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-06API: Add service definitions for events and singleton messages (second attempt)Marek Gradzki4-60/+24
Based on https://gerrit.fd.io/r/#/c/10920/ Updates service definition in stats.api with correct reply message names. Change-Id: I3282bee5304e667e23bc1fab3f43d967a50d880d Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-03-05Revert "API: Add service definitions for events and singleton messages."Ole Trøan4-24/+60
This reverts commit f7b7fa53b7eaec81d8c00c1023fb7d01f1f9761f. Change-Id: I87496342943248e94f01ada31459f387c0a3a610 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-05SCTP: API to configure some tunablesMarco Varlese6-78/+129
This patch adds the possibility to configure some behaviors of the SCTP stack based on some tunable parameters (mainly ON/OFF). For the time being, that is limited to the bundling option (multiplexing messages) and to delaying the SACK message. Change-Id: I696493e0309e47163c1e119c7d9f82f7d8ee6b87 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-05IP6 link-local tableNeale Ranns22-220/+1068
- IPv6 link local table is a per-SW interface array of IPv6 unicast FIBs - the per-interface ocst is sizeof(fib_table_t) which is small, w.r.t. the cost of an interface - FE80::/10 in the 'global' table points to a DPO that performs a lookup in the input interface's LL fib. Change-Id: Ice834b25ebeeacb2e929d7c864d7ec8c09918cbe Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-05API: Add service definitions for events and singleton messages.Ole Troan4-60/+24
Change-Id: I7de987c30b263d43521e6280c5273f30b5f6e11c Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-05SCTP: retransmission in INIT/SHUTDOWN phaseMarco Varlese4-24/+124
This patch addresses the need to handle timers timeouts (e.g. sent chunks not being acked) for both the INIT and SHUTDOWN phases. The INIT phase requires the handling of two timers the T1-init and T1-cookie timers whilst the SHUTDOWN phase requires the handling of the T2-shutdown timer only for the retransmission case. Left to be implemented is the handling of the DATA chunks retransmission (e.g. T3-rxtx expiration) but that will be submitted with a separate patch. Change-Id: I2b2e13dce11000aea3c7d965f02b27b76c97e605 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-05tls: add stop listen handlerFlorin Coras2-9/+42
Change-Id: I233d02a669b6a0504cd54590c6c8e4fefadc4713 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-03netlink: Use nl_pid 0 to play nice with others.Jon Loeliger1-1/+1
While the netlink field is named nl_pid, and typically contains a process id, setting it to a pid value directly prevents other modules from also using a netlink socket. On the other hand, setting it to 0 allows multiple modules to use a netlink socket by letting the kernel assign the nl_pid a value. This allows the verito tap code to interact nicely with the router plugin's librtnl after, say, tap-inject has been enabled. Change-Id: I9771929f34d15497a5f7b8c5fd78dac28e31383b Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-03-02tls: clib_mem_alloc context to avoid dangling referencesFlorin Coras1-30/+32
Change-Id: I1e3b48dfd21c9dbebdbcc0af0d6e888b416b3ac5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-02session: first approximation implementation of tlsFlorin Coras24-163/+1737
It consists of two main parts. First, add an application transport type whereby applications can offer transport to other applications. For instance, a tls app can offer transport services to other applications. And second, a tls transport app that leverages the mbedtls library for tls protocol implementation. Change-Id: I616996c6e6539a9e2368fab8a1ac874d7c5d9838 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-02tapv2: CLI and binary API fixesSteven2-3/+3
1. When interface create encouners an error (see test below), the same id cannot be used again. This is due to hash_set is called too early in the function. After the hash entry is set, there are different errors may cause the interface create to be aborted. But we didn't remove the hash entry when error is encountered. The fix is to move the hash_set call near the end which has no more "goto error" DBGvpp# create tap id 1 rx-ring-size 1021 tx-ring-size 1021 create tap id 1 rx-ring-size 1021 tx-ring-size 1021 create tap: ring size must be power of 2 DBGvpp# create tap id 1 rx-ring-size 1024 tx-ring-size 1024 create tap id 1 rx-ring-size 1024 tx-ring-size 1024 create tap: interface already exists DBGvpp# 2. multiple issues exist with api_format.c with the below command binary-api tap_create_v2 id 4 hw-addr 90:e2:ba:76:cf:2f rx-ring-size 1024 tx-ring-size 1024 - hw_addr is not taken due to the test for random mac is inverted - id is an integer, not a string - integer values were not converted to network format Change-Id: I5a669d702a80ad158517df46f0ab089e4d0d692e Signed-off-by: Steven <sluong@cisco.com>
2018-03-01SCTP: API to delete a sub-connectionMarco Varlese4-2/+106
This patch adds an API to delete a sub-connection following a SRC/DST IP mapping as required by the RFC4960. Change-Id: I7673dd07352557442ffeed6c6c00da274b24953d Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-016RD: Rewritten 6RD RFC5969 support.Ole Troan9-9/+17
Change-Id: Ic30fbcb2630f39e45345d7215babf5d7ed4b33a0 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-01Fix ERSPAN encap to set EN bits in the header and add test caseJohn Lo2-9/+12
For ERSPAN encap, both bits in the EN field of the header should be set to indicate any VLAN tag in the original Ethernet frame is preserved. Added SPAN L2 test case where the mirrored packet output is a GRE ERSPAN tunnel. Change-Id: Ie7a40992a9278469c24aa6fa9e122b4505797d10 Signed-off-by: John Lo <loj@cisco.com>
2018-03-01SCTP: API to add a sub-connectionMarco Varlese7-38/+243
This patch adds an API to add a sub-connection following a SRC/DST IP mapping as required by the RFC4960. At the same time, it changes the way the next available sub-connection is being calculated: rather than having an index in the parent connection which is prone to many issues at run-time, the next available sub-connection is being calculated by looking at the state of the set sub-connections and if marked as DOWN it means that is an available slot to be used. Change-Id: I662be6a247bfbbe8bf9aaf3f485183c07ef862fe Signed-off-by: Marco Varlese <marco.varlese@suse.com>