Age | Commit message (Collapse) | Author | Files | Lines |
|
ouptut
Change-Id: I6f75b7328fd0aa71d00a701e36c8b4ad06bff3c4
Signed-off-by: Chaoyu Jin <chjin@cisco.com>
|
|
This patch address the requirement to handle a COOKIE chunk whilst in
SHUTDOWN phase. The COOKIE shouldn't just be dropped but an OPERATION
ERROR chunk shall be sent to the peer to inform about the current
situation.
Change-Id: I1a47652402d49cfee3b0c810304d7902f3a62f40
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
When heavy traffic is running using worker threads, it may crash here
DBGvpp# 0: /home/sluong/vpp3/vpp/build-data/../src/vlib/main.c:1128 (dispatch_pending_node) assertion `f->flags & VLIB_FRAME_PENDING' fails
Thread 1 "vpp_main" received signal SIGABRT, Aborted.
0x00007ffff5d50428 in __GI_raise (sig=sig@entry=6)
at ../sysdeps/unix/sysv/linux/raise.c:54
54 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb)
No crash was observed if only main thread was used.
Change-Id: I96f8b02ec23accc85c0f1ddecfeff6043b5e3c2b
Signed-off-by: Steven <sluong@cisco.com>
|
|
enabled
Fixed a typo in sctp_push_header(). It was inherited from tcp_output.c
Change-Id: I810fcb4c24cfd3d54f15da72a5184cfc4df24592
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Iacbf7593ef9c03000db502e68335ac3ae18995d7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
platform. VPP-1129
Change-Id: I954acb56d901e42976e71534317f38d7c4359bcf
Signed-off-by: Adrian Oanca <adrian.oanca@enea.com>
|
|
This patch addresses the requirements depicted in section 5.2.4 of the
RFC 4960. It also takes care of handling the ERROR chunk and obviously
the STALE COOKIE error.
Change-Id: I6b88a9371546b18a52abac22f7c593a5f16be838
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
As per RFC4960 the INIT chunk could be received in unexpected scenarios
and - depending on the state of the internal state-machine - the INIT
chunk requires different treatment.
This patch addresses section 5.2.1 and 5.2.2 of the RFC4960.
Change-Id: Ib23ef490c6a5ca3da6c46a9584b75e7577cb7042
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
vlib_buffer_get_current() should be used for current data offset in ACL.
This is required for output ACL where packets are decoded through a vxlan tunnel rx node.
Change-Id: I6f739f251c3eb0d59ee4ae0da97aa04ddf667468
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Change-Id: I7b2f52b2b2ce13f27bddc8750b8fc564bf6ab73e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1d3ede2b043e1fd4abc54f540bb1d3ac9863016e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I28cfa7f7f5e4938146478c4a5cc5ad18612aadaa
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
A bug was found when multiple SCTP connections were being opened to the
same SCTP server. This patch addresses that problem, removing the use of
the 'parent' pointer approach for sub-connection and saving instead
within the sub-connection itself the ID representing its position. That
facilitates pointer-arithmetic to be computed in the
get_connection_from_transport().
Change-Id: Iaa1f4efc501590be1c93e42fd6fe3d6e02f635eb
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Fixes a small bookkeeping oversight where the VXLAN instance
numbers were being freed erroneously by their device_instance
number rather than the correct user_instance number.
Change-Id: I08f6b2089c7a14cc8a8cb91f04f850f60ecec43b
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Ieb6b7a75fa23c8142ae15f42cd3a703253f39e10
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Directly allocate and carve cache-line-aligned chunks of virtual
memory. To a first approximation, bihash wasn't using
clib_mem_free(...).
We eliminate mheap object header/trailers, which improves space
efficiency. We also eliminate the 4gb bihash table size limit. An 8_8
bihash w/ 100 million random entries uses 3.8 Gbytes.
Change-Id: Icf925fdf99bce7d6ac407ac4edd30560b8f04808
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
This patch adds some missing information in various debugging messages
which can help with debugging state-machine and connection-tracking.
It also renames some internal variable names for better code
readibility.
Change-Id: I68503fc0214300032f7514426c8b5b2b12edf11a
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
... you'd think I'd have leanred by now...
Change-Id: I65c54feb2ec016baa07ed96c81ab8f60277c3418
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
The dot1q_vlans & dot1ad_vlans should be reset to 0 when main interface
is deleted. Otherwise, VPP will crash if the same interface index is reused
without attaching the sub interface on it.
Change-Id: I484d4a8892ff4241a3a32b22189746193d5f2594
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
This patch addresses the requirements depicted by section 7.1.1 and
7.1.2 of the RFC 4960. Specifically, it implements the Slow-start and
Congestion-avoidance policies.
The patch also took care of correctly implementing some 'formatting'
functions required - for instance - in packet(s) tracing.
Change-Id: I68eade1b30345de3acb3ac8a653a5ef76eb6d2ac
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I6511110d0472203498a4f8741781eeeeb4f90844
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Also it removes ethernet_frame_is_any_taged implemebntation
which seems to be equally costly compared to two
invocations of ethernet_frame_is_tagged.
Change-Id: If1c95f8267cd34b807ec07e0d675cbd0db2fdf9f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I373f429c53c6f66ad38322addcfaccddb7761392
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Register new type (for use from puglins)
- Memory for delegate is provided by delegate provider
Change-Id: I5ece86b1fe84e3028a5c853871476c4ba015b2eb
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
This patch addresses the SCTP requirement for multiple sub-connections
to implement the so called 'multi-homed' scenario.
Change-Id: Ibce18f216e9d2bebe318992c441bf278e16aad17
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I85602b0178315023bb512babdd5b7dd4263a322d
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
and update glean address on local interface MAC change
Change-Id: I530826d60c7e9db2b0fa2d45754139d82c5ea807
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I62a2a6524b72115a4239fbd7dc9ac8fdc35e20ed
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ibc5b1149f3fbbe3dfe1f069ab69bfed7de660582
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This reverts commit 8b30e471df4d42214619e1d6c50cc8298426b45f.
Change-Id: I99edb236eb0a7f8ba3fba333c3481a710ebcb59c
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This reverts commit a44b015aa012d3b07ed873925d47c6d5955b7dd2.
Change-Id: I2d76bc0844f58e5ddf3f3a4326b86076f46e3751
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I19390f87343bacea84b49fc5d08af38875fdafdd
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I1f8a325eac2a9e2c825996f04026ae86259a7ddd
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
update the glean adj on a local interface MAC change
Change-Id: Ia5c5cde424ed0fea3431532cc5abf22b364bbab5
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change GRE tunnel to use the interface type where the same encap
node is used as output node for all GRE tunnels, instead of having
dedicated output and tx node for each tunnel. This allows for more
efficient tunnel creation and deletion at scale tested at 1000's
of GRE tunnels.
Add support for ERSPAN encap as another tunnel type, in addition
to the existing L3 and TEB types. The GRE ERSPAN encap supported
is type 2 thus GRE encap need to include sequence number and GRE-
ERSPAN tunnel can be created with user secified ERSPAN session ID.
The GRE tunnel lookup hash key is updated to inclue tunnel type
and session ID, in addition to SIP/DIP and FIB index.
Thus, GRE-ERSPAN tunnel can be created, with the appropriate
session ID, to be used as output interface for SPAN config to
send mirrored packets.
Change interface naming so that all GRE tunnels, irrespective of
tunnel type, uses "greN" where N is the instance number. Removed
interface reuse on tunnel creation and deletion to enable unfied
tunnel interface name.
Add support of user specified instance on GRE tunnel creation.
Thus, N in the "greN" interface name can optionally be specified
by user via CLI/API.
Optimize GRE tunnel encap DPO stacking to bypass load-balance DPO
node since packet output on GRE tunnel always belong to the same
flow after 5-tupple hash.
Change-Id: Ifa83915744a1a88045c998604777cc3583f4da52
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I7f5a3b8d92ef07d60315bab6e560eba49ea07249
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The issue observed in the output-node was actually
caused by one of the input-node pushing buffers to
the output node when not required. That is the case
with the parsing/handling of incoming packets like
the COOKIE_ACK, HEARTBEAT_ACK, DATA, SACK which do
not require a response to be sent to the other peer.
In all the mentioned cases the packets (buffers) need
to be consumed and dropped instead of heading to the
output-node.
Change-Id: I3dcbe5de1cedb2ab8b06fff4364749b525cc7ac6
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This patch takes care of some refactoring, including the initialization
of the timestamp to calculate the RTO, the output state-machine
validation which can be enabled (disabled by default) when debugging and
some clean-up of unused fields.
It also addresses the requirement of Karn's algorithm when computing the
RTO.
Change-Id: I6b875152369bff23cad085708cec1f7e1151cfa8
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
We disable the client detect feature when we bind a DHCP address. Turn
it back on again when the lease expires. Otherwise, if the DHCP
server replies after an outage, we'll never see the reply.
Add dhcp packet tx counters, by packet type
Change-Id: Id54b05647d5d7bd8d3ab99e6584ee86d9e4ff7f9
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Memfd backed shared memory segments can only be negotiated over sockets.
For such scenarios, the existing redirect mechanism that establishes
cut-through sessions does not work anymore as the two peer application
do not share such a socket.
This patch adds support for local sessions, as opposed to sessions
backed by a transport connection, in a way that is almost transparent to
the two applications by reusing the existing binary api messages.
Moreover, all segment allocations are now entirely done through the
segment manager valloc, so segment overlaps due to independent
allocations previously required for redirects are completely avoided.
The one notable characteristic of local sessions (cut-through from app
perspective) notification messages is that they carry pointers to two
event queues, one for each app peer, instead of one. For
transport-backed sessions one of the queues can be inferred but for
local session they cannot.
Change-Id: Ia443fb63e2d9d8e43490275062a708f039038175
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
vxlan interfaces no longer create tx nodes and are "cheap" to create and delete
Change-Id: I7628d8ce86ec88609ed08162c94f5bc95df0d9f4
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I0ee18df69d5fe833c746d0d1e14aac14338a6e42
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
This makes it possible to add BFD commands to scripts executed via
`exec' CLI.
Change-Id: Id0ed6c09baee6f8ac9ff183d305a470f55a1f885
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Crash occurring With a worker thread configured and dhcp
client active on an interface. When a DHCP reply packet
is received, call to ethernet_get_main() from
dhcp_proxy_to_client_input() was causing a crash.
Replaced with a call to vnet_get_ethernet_main().
Once that was resolved, calling dhcp_client_acquire_address()
from a worker thread also caused a crash. Changed so the main
thread will do the address/route configuration.
Change-Id: Ib23984787102dea8cf6cfcde86188a751f15c1e1
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I070771794be92fd9a6e800ca0022e52d592cd1a4
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- setting MTU on an interface updates the L3 max bytes too
- value cached in the adjacency is also updated
- MTU exceeded generates ICMP to sender
Change-Id: I343ec71d8e903b529594c4bd0543f04bc7f370b3
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: Ib9eb65d2ba166f5883a8ce8d37298c696113f2be
Signed-off-by: Chun Li <chunl2@cisco.com>
|
|
L2 ACL
There was no test coverage for the L2 ACL (other than indirect by
means of ACL plugin tests), so the enabling of the outbound ACL
got fumbled throughout the revisions of the refactoring.
Fix both issues - the error and the lack of test coverage for L2 ACL.
Change-Id: Ib7f42780ef84b4a4f70bd88d7319aeeda866cf06
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ib04a8787038fb536470a04d99fdc165102edfb5a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In the case that vhostuser server accepted more than one client connection,
'vui->clib_file_index' will be overwritten directly without release the possible
existed resource, so file descriptor leak occurs
Change-Id: I89d08133dae31a12a815df2631334dbf0aefeb1e
Signed-off-by: Haiyang Tan <haiyang.tan.dev@gmail.com>
|