Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Currently, RA message sending is enabled by default - both periodic and
in response to RS message. However, RFC 4861 section 6.2.1 says the
following:
Note that AdvSendAdvertisements MUST be FALSE by default so that a
node will not accidentally start acting as a router unless it is
explicitly configured by system management to send Router
Advertisements.
With this change, RA message sending is disabled by default and
"test_ip6.TestIPv6.test_rs" updated appropriately.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I2a8865199cb665c59268504aefe2976e5ee96dc2
|
|
Type: fix
The reported MTU should include the MPLS label overhead
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3df6d2e0b13f49701e187a766a157498dcaafbc0
|
|
Type: fix
When a covering entry is removed from the table, the covered entries first see it 'updated' and then 'removed'.
the crash occurs because the covered prefixes share (simple pointer copy) the covereds hash table of path extensions. During the cervers deletion this hash table has been removed and the update of the covered crashes when recaluationg forwarding becuase it uses the free'd hash.
Fix is to refetch the shared hash table (which is NULL) when the covered is updated.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Icefca9d7b21da975111d0e974d75f663fc0cc00c
|
|
Type: fix
Fixes: 26bc9f3c855496fb56f5fc648f75a299d4d539f8
Change-Id: Idab52bf856c03ded7b181608c3db1313aa2e33de
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ib96ee54eaf967bf435d6da910a6b582e87fbedc0
|
|
Type: improvement
This patch adds support for:
1) GSO
2) checksum offload
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ib00629888c62da04d58db36ce021993769e736c9
|
|
Type: feature
CPU usage ~20% less than v2.
Performance improvement 20% more than v2.
High vector rate.
Change-Id: I24bc594200f42664b59d07b44d44578e61068bbc
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This allows specifying both c string and vector for node name
and removes need for crafting temporary string.
Type: improvement
Change-Id: I0b016cd70aeda0f68eb6f9171c5152f303be7369
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
This also makes the is_white_space function
public
Change-Id: Ifc1c0d4509f3ecae14f09bb5fa7a2eea33c49b09
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: refactor
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ibb6d19de053c306e9758dbfa827ab7bcab5de856
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I313c916d268c4b2b448b93e90bc67da341b803e3
|
|
Follow e3aeb38fa82b77ae84643f5140d9674056b6b5ca
Type: fix
Signed-off-by: Vladislav Grishenko <themiron@yandex-team.ru>
Change-Id: I743911cacc026af5da392d26eaf47ab83ea1de99
|
|
Minimize amount of rpcs from first worker to main
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3794ff028a17d18b7bff69ede2b62e1e2d45ae77
|
|
The behavior associateted to a LocalSID accordig to the definition should be u8 instead of u16;
Type: fix
Signed-off-by: Francesco Lombardo <franclombardo@gmail.com>
Change-Id: I6dd60d5facc1c3f20900cb393619349e82eef38c
Signed-off-by: Francesco Lombardo <franclombardo@gmail.com>
|
|
This is not to be used lightly.
The idea is to forces pool reallocs to be done only on main thread with
a barrier to make sure pools are always reallocated without
peekers/readers. If rpcs are delayed and the pool runs out of elements,
workers will block waiting for barrier and force the realloc.
Consumers of this api should be session layer and transports.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I533272a29534338935a3fcf7027c0e7af2ca948c
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I88a747cac70cb88755f50c7b337207f4ba256530
|
|
Type: refactor
Change-Id: I3625eacf9e04542ca8778df5d46075a8654642c7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
There is no need to verify the checksum for packets that have the IP
checksum offload flag set. This uses the same logic as
ip4_ttl_and_checksum_check.
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
Change-Id: I177b07212a992362a4c965c074dcecf1e504c593
|
|
Checking for existence of source address on interface prevents creating
session before assigning address to said interface. Removing this check
allows more flexibility when configuring BFD feature.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ia57960e29b5dbdb758a7a64193c28f21482f229e
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib2e1d847607c9c7d928b174b87e5c21d53153ebe
|
|
Update persist timer if data sent during snd_wnd < snd_mss was acked.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5c75ff8ddc0e49750b2088237d32afa4eda99e7f
|
|
In order to support the requirement of RSS and packet steering of new
protocols, such as GTPU PDU-type and QFI, for 5G UPF, a generic pattern
is introduced in vnet flow. The generic flow pattern is based on DDP
(Dynamic Device Personalization) function and Parser Library module in
DPDK. Using generic flow pattern, we do not need to create new packet
and field type and offset in API parser for every new protocols. We can
create flows for any protocol immediately as long as supported by DDP.
The generic flow can be used to support 5G related protocols in
different scenarios.
The input of this generic pattern are two binary strings for spec and
mask. Spec is the binary presentation of the target packet type, and
mask is used to mark the target fields.
In this patch DPDK plugins is enabled for POC. Next step we will enable
generic flow in native IAVF, which is the main target.
Here is an example. If we want to create a flow for GTPU QFI,
spec is:
00000000000100000000000208004500003C00000000001100000101010102020202000
008680028000034FF001C00000000000000850100010045000014000000000000000001
01010102020202
mask is:
00000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000007F0000000000000000000000000000
00000000000000
A naming API POC is created via VAPI to help create the rule with
the target packet format similar to Scapy. It is based on a function
module called PacketForge. In this way, the user no need to create
binary string spec and mask by themselves.
Type: feature
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: Id3444f95c158bdcdfeeee19d795cd9ecbeeec07c
|
|
This fixes a crash caused by client closing socket before adding worker.
During detach vpp tries to delete worker based on invalid worker index.
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I3242bcbb116ef5fd1d4c449f5bcf907e4e2f8f30
|
|
Type: refactor
Change-Id: If180816303909b92c9aa4ff9fd70dc7938a6cfbe
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I0a40e22e1439e13ffdbcbd6fd7cad40c8178418c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
The l2unfragmentable size is not included in the calculation of 'max', the maximum amount of data that can be added to a fragment, therefore the fragments created are too big.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Id1e949ad98203b6f8ea2f55322ef6fa3d507e2a6
|
|
Type: refactor
Change-Id: Ifd533a095d979dc55bfbe5fac7e0b7510a4d900c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: Ica3e60836c0f26518ba2c238a8c03ce3648ea69b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
As per IPSec RFC4301 [1], any non-matching packets should be dropped by
default. This is handled correctly in ipsec_output.c, however in
ipsec_input.c non-matching packets are allowed to pass as per a matched
BYPASS rule.
For full details, see:
https://lists.fd.io/g/vpp-dev/topic/ipsec_input_output_default/84943480
It appears the ipsec6_input_node only matches PROTECT policies. Until
this is extended to handle BYPASS + DISCARD, we may wish to not drop
by default here, since all IPv6 traffic not matching a PROTECT policy
will be dropped.
[1]: https://datatracker.ietf.org/doc/html/rfc4301
Type: fix
Signed-off-by: Zachary Leaf <zachary.leaf@arm.com>
Change-Id: Iddbfd008dbe082486d1928f6a10ffbd83d859a20
|
|
While setting an ACL, a user can specify the adjacency to follow after
the input ACL node. Thus, we may skip a lookup and enter directly a
local node (ex: ip4_local). To prevent the local source check from
failing, we need to specify the fib index. And, we have to do it just
before exiting the input ACL node because the l2_classify object
is overlapping with the fib_index in the vnet_buffer_opaque_t struct.
We could have added a padding to avoid this overlap but there is no
place for that in the structure.
Type: fix
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I383c36e4aec08d181f966f28565aefed950d2a74
|
|
Type: fix
- IPv6 fragmentation did not work if the packet spaneed multiple buffers, because the 'len' calculation to did max out at the size of a buffer
- IPv6 fragmentation did not work when the l2unfragmentable size was non-zero, it was not used in the correct places
- IPv6oMPLS fragmentation would fragment all IPv6, it should do so only for link local
- IPv6oMPLS should send back TooBig ICMP6 for non locally generated
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie8f02cdfdd7b7e8474e62b6d0acda8f20c371184
|
|
Type: improvement
For error conditions, such as TTL expired, dest unreach, etc, Rate limit the sending of ICMP error messages.
The rate limiting is done based on src,dst IP address of the received packet.
the rate limit has been chosen, somewhat arbitrarily, to be 1e-3. This is the same limit as the ARP throttling.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a0b791cde8c941a9bf37de6aa5da56779d3cef4
|
|
ip6_ext_hdr_chain_t->eh is IP6_EXT_HDR_MAX elements.
Type: fix
Change-Id: I28b8d610d8f5c0c520c8391c37b86e837655ab12
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
This patch removes the assert and it is unnecessary.
Because given variable is used for branch testing.
Change-Id: I64f57f909fcba205216296e86c1cde2a5dadbb45
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I5dda196ab8f1b634fcac46acd5c57a6dd726759c
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I2b8b6a3b5a6df71e84ce2f15ef7117f390121c2f
|
|
Add the possibility to create masks and matches without l2 header in the
CLI when creating tables and entries. This is useful for tables working
on l3 and l4 only.
Type: improvement
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I7da9e47d810c0b4a0938e2cb3bc31aa69ace3649
|
|
Type: fix
the MTU needs to be adjusted to account for the label stack, since the size of fragments produced is stack+mtu.
these changes are to the use of the stack variable 'mtu'
most of the patch results from appeasing checkstyle.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I8d0e10cf52ca4dd8ecdc224ed6c54a13e4768fdd
|
|
Type: fix
it only display the first flag set
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I45cddbac0d4eed8bda10bf5e0f7c9db0faf183c5
|
|
Use system wall-clock time for packets timestamps instead of the time
since VPP started for pcap traces.
Type: improvement
Change-Id: I716165912efe8db3a8861d5c10597dc7629d2293
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4fd7ae435514eb986543302c7e3e69e04acba8cf
|
|
Type: refactor
check for pool expansion in the DPO allocation, just in case.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I6ba7dd66313630d3f24a51700ab4486ba43d856b
|
|
Type: fix
Fixes: 1cd0e5dd533f4209dde453eaa43215e52cd42985
Change-Id: I64318585fb3b12369b78735c681f3b747c67b53b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3788cc857023fafcc8eb6d6ff4524425026a75d8
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If5eed7dac4951f0510a4b4b092f66f44d0d3cacd
|
|
Type: fix
Signed-off-by: Saravanan Murugesan <sarmurug@cisco.com>
Change-Id: Icfd5e3c0bb034684c7bc43be46927294536ba08a
|
|
This fixes an issue caused by session layer reading expected part of
data (cert + key) before the client actually sends it.
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I6ddddb08f9576211b302e814d7c2b040383e5fb7
|
|
- HICN project's hicn_plugin requires vnet header files
fib/fib_entry_track.h and udp/udp_encap.h to be
included in build-root/install-vpp*-*/vpp/include/vnet
Type: fix
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: Iabd3f8fe0aee8d727758fc6ef202e859d68d63a3
|
|
Revert "vxlan: crash on configuring vxlan tunnel on l3 mode"
This reverts commit b8de7d43e4955bb4025cd0e0e7390279841b6d7d.
Reason for revert: VPP-2014
Type: fix
Fixes: b8de7d43e4955bb4025cd0e0e7390279841b6d7d
Change-Id: Ic4d10f28985ee10e0550a1bbfd465ada915e4aa6
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
|
|
adj_get() crashed in worker thread. The index is valid but was freed.
0x00007fba5fb07921 in __GI_abort () at abort.c:79
0x00007fba528de7c3 in os_panic () at /development/libvpp/src/vpp/vnet/main.c:618
0x00007fba506f2a19 in debugger () at /development/libvpp/src/vppinfra/error.c:84
0x00007fba506f2797 in _clib_error (how_to_die=2, function_name=0x0, line_number=0, fmt=0x7fba521cecd9 "%s:%d (%s) assertion `%s' fails") at /development/libvpp/src/vppinfra/error.c:143
0x00007fba51d88254 in adj_get (adj_index=79) at /development/libvpp/src/vnet/adj/adj.h:472
0x00007fba51d87642 in icmp6_neighbor_solicitation_or_advertisement (vm=0x7fb9f19a0580, node=0x7fb9bb820340, frame=0x7fb9b718bc40, is_solicitation=0) at /development/libvpp/src/vnet/ip6-nd/ip6_nd.c:134
0x00007fba51d8f479 in icmp6_neighbor_advertisement (vm=0x7fb9f19a0580, node=0x7fb9bb820340, frame=0x7fb9b718bc40) at /development/libvpp/src/vnet/ip6-nd/ip6_nd.c:348
Type: fix
Signed-off-by: Rajith P R <rajith@rtbrick.com>
Change-Id: Ibe29854137ee9680f7947450eb7e256b8c0ade31
|