Age | Commit message (Collapse) | Author | Files | Lines |
|
Cleanup L2/L3 mode switch to not redirect to/from ethernet-input node
as it is no longer necessary.
L2 patch should use sw_if_index for device feature enable/disable.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I0f24161d027b07c188fd1e05276146f94c075710
(cherry picked from commit f415a3b53a51b261d08cc3312c25f250d6bc1bd6)
|
|
Type: fix
Change-Id: Id6687780b9a740323bd2eef58447864e70dc0235
Signed-off-by: Ignas Bacius <ignas@noia.network>
(cherry picked from commit f3a522fb3f3a82e579fbdd3f4bb94e399ad95bb1)
|
|
Calling ethernet_set_flags() to switch interface to/from promiscuous
mode must use use hw_if_index instead of sw_if_index.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I72da286b913893227e32193ee11fbbc56e04804d
(cherry picked from commit 5b960c60f61c937d0f862be8a7573922b616de75)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I84ec1c91a3a7b2195aad58923fa6f17f551444cb
(cherry picked from commit f2fe353cc829f2074d63ebba9bb3b25e5ceb20af)
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I20daa023eed50f8b42e8dc2d17e47a54aa16ae31
(cherry picked from commit 13f64ce2272539d97b8c499e8e298a053fb3c9e2)
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I51660e4b02f449bd2db12a8cfd395c6c343d2dee
(cherry picked from commit c72950e811880c22e5b350c4b1cb5e31b0735b4d)
|
|
When use the kv->v.memory_owner_thread_index as the index to get the
reass in pool, maybe this element is freed by the owner thread because
of timeout, too many fragments, and so on.
So we should check if do_handoff with kv->v.memory_owner_thread_index
before get the reass from pool.
Type: fix
Signed-off-by: Gao Feng <davidfgao@tencent.com>
Change-Id: Ie0f1dc368f86d0fd65292ca0c5e1908348015e09
(cherry picked from commit 9165e0365cc21575fd3e4a98be59317a839553f4)
|
|
Type: fix
Use the up parameter in vnet_netlink_set_link_state(). It was
ignoring the parameter and always setting IFF_UP on an interface.
Change-Id: I0d44406d982afbdc43bc6b26d0f22c0bdd47abdc
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 81284163a293759bc5c2d6a124639c6796589d15)
|
|
Extending the fib_index_to_table_index could leave entries uninitialized,
pointing to the session tables at index 0. That session index exists by
default, but it is a IPv4 session table. That would break all IPv6 on
the unitilized fib indexes.
Type: fix
Change-Id: Ie3f0a87a7f829ceb39f75ec06658b0ad1d3813ae
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
(cherry picked from commit 30a28c187b0eb9216d5d7918712d98a4b7a5ba6a)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I98f943c8862fa74fb576f9ec1fb9186289b1216b
(cherry picked from commit c17ff6ec3b69ef228047bf346e0b524c48d2c96e)
|
|
bts can be freed by the call to bt_fix_overlapped(). Save flags for
later use.
Type: fix
Change-Id: If8b48c96ce39e38f2ed7f4db2815122523eb2e05
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit a04adbf5368f9ec907508ff36d42fbd72d287120)
|
|
Type: fix
Change-Id: Ia5ae0e893a5358f61353d20f444d88d79953e482
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit b9753540d2a69bbab807653fc3d0c1b43ec4d6d5)
|
|
Type: fix
Change-Id: Ie60b07abe76ad166f048f5885accd7038d8153b2
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 7ce23f25bbc01d534ca294ce88ab0d709e3e03a7)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iba37e528e968104c3ba9c8324438ba695ddddfd1
(cherry picked from commit da302e4fce1003a2fdd2ace7e1ae09987399092c)
|
|
Type: fix
Change-Id: I42c3e3514ba50d40e09ee688d083f3e78fa0713a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 101fc278c3b7009c42574a25b96c4fb7fcd15e39)
|
|
Type: fix
Change-Id: Ie7081d977dd0d3e7d09bc0d1b4d53863288e443b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 95eb01fdc65b692065ace6d76870d8cc9f3e2c84)
|
|
The vector is initialized to 1024 entries which is guaranteed to be
enough, but as its size can shrink between calls, make sure ASan is
aware of the expected size before using it.
Type: fix
Change-Id: I4bcc39867a886b3cb463854d2cda0b32155650e9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 77100efb37f7cb333f9ab55dc206bf1431e3ae50)
|
|
Type: fix
Avoids unwanted notifications.
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifff27fb0d3644194e3bb3f91d7ed1fd02c6730cd
(cherry picked from commit 77ea42b31ae12f0aef829097225e353199360f30)
|
|
Type: fix
Signed-off-by: ShivaShankarK <shivaashankar1204@gmail.com>
Change-Id: Iee88a2101ce42d7f1cdb65df532c349d14829e4c
(cherry picked from commit 35acaac1843839f94e9bd40ad45a8d170a155f22)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie0c5a86aedfa38fdcbb835aee7c9e91d59b222d6
(cherry picked from commit bc1a1a7347d689aa7043d4d7f15a7db657230216)
|
|
Type: fix
Signed-off-by: ShivaShankarK <shivaashankar1204@gmail.com>
Change-Id: I193023705003e664c50487fdfaa42b813604a078
(cherry picked from commit ae9c45938bdf6e180f83f02aed31113e60db20a9)
|
|
If vlib_buffer_clone (...) fails due to a buffer allocation error, update
*n_dispatched with the actual number of clones, not the requested
number of clones.
Punt_replicate(...) should not set *to_next[0] = bi0. The original
buffer is enqueued separately in punt_dispatch_node(...)
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I774ad8f8c1a0633de4cf8ae5530629201c229347
(cherry picked from commit 1adc7e78ad3eb7e800d0ce3ace56f53ab7aebffe)
|
|
Along with related static analysis warnings...
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I2c6949c7a2250b8f76a63508c7c210daecfe0f91
(cherry picked from commit 3e07a4a1e843267892dc291a833d93bd70597011)
|
|
This prevents a crash with quic listeners, and enables the display
of udp fifo status.
Change-Id: Ib9f48818ee3e51a3fa43ad8ab175e8aa7750df8f
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
(cherry picked from commit 6eef40bce3f5ae2b06ba75d5b4cf32f168a801e4)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3f34011ca61ded310d0411e7b50548982bd164ac
(cherry picked from commit 936197467aac08b7620c9cb0614817b90466968e)
|
|
Type: fix
The data populated into an ipsec_tunnel_protect_details message includes
an outbound SA and a list of inbound SAs for a tunnel interface. These
are populated with SA indices. The values used by an API client
to refer to an SA in other messages is the SA id rather than the index.
Use the SA id instead of the index.
Change-Id: Ifaad32801092a7f87bd0dcf19de418d36613f8dd
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 5cee0bca5d0f01d3f26e90dee79780382e843d04)
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib5da600b7a40f775de7dc5b9aaa8d967e49e8632
(cherry picked from commit 4897d77c6d4d5d04eb7e02bda57dc6c7005a609f)
|
|
Type: fix
it was marked MP safe in the CLI (which it shouldn't be) but
it it not marked MP safe on the API.
Change-Id: I4bdea498a510a8b406d13d62a899b6d03656f7e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 31d6c738c20d3baa619dbbb08af6125fab32bc08)
|
|
Turn on gso, turn off both indirect and mrg_rxbuf caused traffic received
and sent with checksum error. The problem is we are not mapping the hdr
correctly in the shared memory address.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I7ef3bc2755544167b0e624365988111b17399e89
(cherry picked from commit b232d192f2f77114e26cf7f99b57bcd6140872d0)
|
|
Type: fix
Signed-off-by: Jawahar Santosh Gundapaneni <jgundapa@cisco.com>
Change-Id: Ife0f7749a72cc834a3d811f8cf6b5a0840157014
(cherry picked from commit 62ad2aaff3810f4ec0f010700091c2f59fbfe466)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia2e29b4776c0f8df666da39a14c5ef2fa1693c21
(cherry picked from commit 7fd59cc79c9fb0cccd0cb5c0b4579d0f0a004f6b)
|
|
Rather than leaving 2 bytes of junk in the upper word
of a mac address represented as a u64, zero them out.
That way later compairsons stand a chance of matching
when deleting a bridge's arp termination entries.
The volatile qualifier shouldn't be needed here, but
without it the compiler removes the clib_memcpy() at -O2.
Bad compiler. No biscuit.
Type: fix
commit: faf22cb303b65e2a6bf8dad959d7f5ee6d031c4f
Change-Id: Iebcf35fdd421293dccbcaefadef767f7e139438e
Signed-off-by: Jon Loeliger <jdl@netgate.com>
(cherry picked from commit 6a32ce326495bfe48ebef74dfbb8a9c1cf37a530)
|
|
The port registry uses host byte order for while the session API
uses network order. In a single place the conversion was missing.
Type: fix
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: Ic8cfe2cb4e0711b3e0614060ff6b4f2fe4ed4391
(cherry picked from commit 49a11cff8e7892858d946d3f93ae19502236c358)
|
|
This path flag FIB_API_PATH_TYPE_INTERFACE_RX is not copied to the client bin_api.
Type: fix
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: I612044d2f564c852f83fceb63ce750a6330e1365
(cherry picked from commit 79437c8dbc707e6f60e7a2425fac15c4153f71b3)
|
|
build vat with src/vnet/ip/ip_types_api.c
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Iab0f18bf7a89cf9512beab0629bc3a349edec383
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
(cherry picked from commit 23a386b71b287bc95000a8980856c5dbe7cdaf5a)
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: Ie2dc2653baec92347eb2cbcd197a2e5ec6a80c79
(cherry picked from commit 487507f40f4e443ff1e683641206db80875f3477)
|
|
Type: fix
Change-Id: Ia61d6fbf6e80977f83f1f6672e5e83b52ddeb0e5
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit ea96e92361b483962fd2a6b027cedc02f3bb6f93)
|
|
Type: fix
Change-Id: I008f23b5f0c7269ddd35cc747a867240fbe9c49b
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit d057625d499525625d60d2207665eaeb755e380e)
|
|
Type: fix
Change-Id: I048c9ed423ca2993d2179cdce364ac98980311bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 39a233a0aa21c644c78ddd4ffa0ab3cdb1c10318)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4153a9a377b8b1da1366a94ff791ad99617b7a6d
(cherry picked from commit 62a7fe28933b6310b9a4e3a0fab99949587576ac)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie060b25b5e8c85d9b2037e300723a2b6023c65d1
(cherry picked from commit 6ce954f8e4446472689146024126ba42da182aa9)
|
|
Type: fix
Change-Id: I57f8bfbce4feed9d2775875cb8b1b729a47900a4
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 24064d02aa9810ebc64c16dc778a179bb0ef5483)
(cherry picked from commit 3ebebc3a2fe47f1222ba035e04ccd8caed0cf58f)
|
|
Add an ALWAYS_ASSERT (...) macro, to (a) shut up coverity, and (b)
check the indicated condition in production images.
As in:
p = hash_get(...);
ALWAYS_ASSERT(p) /* was ASSERT(p) */
elt = pool_elt_at_index(pool, p[0]);
This may not be the best way to handle a specific case, but failure to
check return values at all followed by e.g. a pointer dereference
isn't ok.
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ia97c641cefcfb7ea7d77ea5a55ed4afea0345acb
(cherry picked from commit 47d41ad62c5d6008e72d2e9c137cf8f49ca86353)
|
|
Type: fix
Change-Id: I50329bda365d98f9f9d56a58187fb4fb2a4eb461
Signed-off-by: Yu Ping <ping.yu@intel.com>
(cherry picked from commit 985d9293a08dc3da016fbeeaa3f8fff10e1b504e)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Idaa7cc26ad941be86daec4ed5920727237712f4a
(cherry picked from commit 16d974ec59776f0103ad62d0d04dc57989eef7ed)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie8bc5c9a03e858487cf565b4e9b520e6b496337a
(cherry picked from commit fa2a316663e622a2feeecf8ad7d32b242370a70a)
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I87940d02813b66616f1944e41b16c8cc16f5dac0
(cherry picked from commit deb6f784edbaddd2e60e0d6ac9927f17c4214ad2)
|
|
Type: fix
Change-Id: I0c9640dab2c0eaba369bc8f3ff7ae56d8e97e170
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit f1ecb6555326f8a7d5bba6f56aa676f064675dc0)
|
|
L4 checksums for IPv6 should be calculated using a pseudo header that
includes the source/destination addresses, payload length, and payload
protocol.
ip6_tcp_udp_icmp_compute_checksum() was using the payload length and
protocol from the IPv6 header. If there is a hop-by-hop header (or any
other extension header), the payload length used for the pseudo header
should only include the upper layer header and payload and not the
extension header bytes. Same deal with the protocol, the upper layer
next header value should be used instead of the extension header.
Type: fix
Fixes: cb9cadad57
Change-Id: Ifa2c9ad41c0fc4eea674f0671255b637c8e01f71
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 97677a26f7c857e7ee0acbdb2c13eef214aa70a8)
|
|
Type: fix
Change-Id: Idbb3f29b13a5c84a8585c4299e51fdfc35f7e1ad
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 84382ae45c2cf694ef7faf4a87d60c1546869301)
|